| Message ID | 1422052359-12384-6-git-send-email-m-karicheri2@ti.com |
|---|---|
| State | Not Applicable |
| Headers | show |
On Fri, Jan 23, 2015 at 05:32:38PM -0500, Murali Karicheri wrote: > If there is a DT node available for the root bridge's parent device, > use the dma configuration from that device node. For example, keystone > PCI devices would require dma_pfn_offset to be set correctly in the > device structure of the pci device in order to have the correct dma mask. > The DT node will have dma-ranges defined for this. Also support using > the DT property dma-coherent to allow coherent DMA operation by the > PCI device. > > This patch use the new helper function of_pci_dma_configure() to update > the device dma configuration. > > Cc: Joerg Roedel <joro@8bytes.org> > Cc: Grant Likely <grant.likely@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Will Deacon <will.deacon@arm.com> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> > > Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> I assume this series will be merged via some non-PCI tree, so: Acked-by: Bjorn Helgaas <bhelgaas@google.com> > --- > drivers/pci/probe.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 23212f8..d7dcd6c 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -6,6 +6,7 @@ > #include <linux/delay.h> > #include <linux/init.h> > #include <linux/pci.h> > +#include <linux/of_pci.h> > #include <linux/pci_hotplug.h> > #include <linux/slab.h> > #include <linux/module.h> > @@ -1520,6 +1521,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) > dev->dev.dma_mask = &dev->dma_mask; > dev->dev.dma_parms = &dev->dma_parms; > dev->dev.coherent_dma_mask = 0xffffffffull; > + of_pci_dma_configure(dev); > > pci_set_dma_max_seg_size(dev, 65536); > pci_set_dma_seg_boundary(dev, 0xffffffff); > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/23/2015 06:27 PM, Bjorn Helgaas wrote: > On Fri, Jan 23, 2015 at 05:32:38PM -0500, Murali Karicheri wrote: >> If there is a DT node available for the root bridge's parent device, >> use the dma configuration from that device node. For example, keystone >> PCI devices would require dma_pfn_offset to be set correctly in the >> device structure of the pci device in order to have the correct dma mask. >> The DT node will have dma-ranges defined for this. Also support using >> the DT property dma-coherent to allow coherent DMA operation by the >> PCI device. >> >> This patch use the new helper function of_pci_dma_configure() to update >> the device dma configuration. >> >> Cc: Joerg Roedel<joro@8bytes.org> >> Cc: Grant Likely<grant.likely@linaro.org> >> Cc: Rob Herring<robh+dt@kernel.org> >> Cc: Bjorn Helgaas<bhelgaas@google.com> >> Cc: Will Deacon<will.deacon@arm.com> >> Cc: Russell King<linux@arm.linux.org.uk> >> Cc: Arnd Bergmann<arnd@arndb.de> >> Cc: Suravee Suthikulpanit<Suravee.Suthikulpanit@amd.com> >> >> Signed-off-by: Murali Karicheri<m-karicheri2@ti.com> > > I assume this series will be merged via some non-PCI tree, so: Not sure who will pick this. Since this is for PCI, will it be possible to apply this to arm-pci/next? > > Acked-by: Bjorn Helgaas<bhelgaas@google.com> I will add your ack for v5. Murali > >> --- >> drivers/pci/probe.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >> index 23212f8..d7dcd6c 100644 >> --- a/drivers/pci/probe.c >> +++ b/drivers/pci/probe.c >> @@ -6,6 +6,7 @@ >> #include<linux/delay.h> >> #include<linux/init.h> >> #include<linux/pci.h> >> +#include<linux/of_pci.h> >> #include<linux/pci_hotplug.h> >> #include<linux/slab.h> >> #include<linux/module.h> >> @@ -1520,6 +1521,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) >> dev->dev.dma_mask =&dev->dma_mask; >> dev->dev.dma_parms =&dev->dma_parms; >> dev->dev.coherent_dma_mask = 0xffffffffull; >> + of_pci_dma_configure(dev); >> >> pci_set_dma_max_seg_size(dev, 65536); >> pci_set_dma_seg_boundary(dev, 0xffffffff); >> -- >> 1.7.9.5 >>
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 23212f8..d7dcd6c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -6,6 +6,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/pci.h> +#include <linux/of_pci.h> #include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/module.h> @@ -1520,6 +1521,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) dev->dev.dma_mask = &dev->dma_mask; dev->dev.dma_parms = &dev->dma_parms; dev->dev.coherent_dma_mask = 0xffffffffull; + of_pci_dma_configure(dev); pci_set_dma_max_seg_size(dev, 65536); pci_set_dma_seg_boundary(dev, 0xffffffff);
If there is a DT node available for the root bridge's parent device, use the dma configuration from that device node. For example, keystone PCI devices would require dma_pfn_offset to be set correctly in the device structure of the pci device in order to have the correct dma mask. The DT node will have dma-ranges defined for this. Also support using the DT property dma-coherent to allow coherent DMA operation by the PCI device. This patch use the new helper function of_pci_dma_configure() to update the device dma configuration. Cc: Joerg Roedel <joro@8bytes.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> --- drivers/pci/probe.c | 2 ++ 1 file changed, 2 insertions(+)