| Message ID | 20150122203336.GD13072@google.com |
|---|---|
| State | Not Applicable |
| Headers | show |
On Thu, Jan 22, 2015 at 02:33:36PM -0600, Bjorn Helgaas wrote: > On Mon, Jan 12, 2015 at 01:05:12AM +0100, Linus Walleij wrote: > > On Sat, Jan 10, 2015 at 10:53 PM, Arnd Bergmann <arnd@arndb.de> wrote: > > > On Saturday 10 January 2015 22:40:22 Linus Walleij wrote: > > >> > static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, > > >> > int size, u32 *val) > > >> > { > > >> > - addr = v3_open_config_window(bus, devfn, where); > > >> > + int ret = pci_generic_config_read(bus, devfn, where, size, val); > > >> > v3_close_config_window(); > > >> > + return ret; > > >> > } > > >> > > > >> > static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, > > >> > int size, u32 val) > > >> > { > > >> > + int ret = pci_generic_config_write(bus, devfn, where, size, val); > > >> > v3_close_config_window(); > > >> > - raw_spin_unlock_irqrestore(&v3_lock, flags); > > >> > + return ret; > > >> > } > > >> > > > >> > static struct pci_ops pci_v3_ops = { > > >> > + .map_bus = v3_open_config_window, > > >> > .read = v3_read_config, > > >> > .write = v3_write_config, > > >> > > >> So .map_bus is called before every .read/.write operation I take it. > > >> > > >> Wouldn't it be proper to call the v3_close_config_window() from a > > >> matching .unmap_bus() callback for symmetry? > > > > > > It would be nicer for integrator but useless for anything else, so > > > I'd vote for leaving it the way Rob posted. > > > > OK I buy that, throw in a comment about it in the code if there > > is some time for iterating the patch. > > Would you prefer something like the following instead? It keeps the > v3_open/close symmetry, but it does break apart and duplicate some of the > logic from v3_open_config_window(). Hearing nothing, I kept Rob's initial version. It can be tweaked later if anybody wants to. I just want to get all this into v3.20. Bjorn > commit 3e0c269a560968002298d22ac47bde4bd45aea8e > Author: Rob Herring <robh@kernel.org> > Date: Fri Jan 9 20:34:41 2015 -0600 > > ARM: integrator: Convert PCI to use generic config accessors > > Convert the integrator PCI driver to use the generic config access > functions. > > This changes accesses from __raw_readX/__raw_writeX to readX/writeX > variants. The spinlock is removed because it is unnecessary. The config > read and write functions are already protected with a spinlock and no > access can occur during the .pre_init function. > > Signed-off-by: Rob Herring <robh@kernel.org> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > Acked-by: Linus Walleij <linus.walleij@linaro.org> > CC: Russell King <linux@arm.linux.org.uk> > CC: linux-arm-kernel@lists.infradead.org > > diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c > index c186a17c2cff..c1098729cf8a 100644 > --- a/arch/arm/mach-integrator/pci_v3.c > +++ b/arch/arm/mach-integrator/pci_v3.c > @@ -324,7 +324,7 @@ static u64 pre_mem_pci_sz; > * configuration address space, you present the V3 with the following pattern > * (which is very nearly a type 1 (except that the lower two bits are 00 and > * not 01). In order for this mapping to work you need to set up one of > - * the local to PCI aperatures to 16Mbytes in length translating to > + * the local to PCI apertures to 16Mbytes in length translating to > * PCI configuration space starting at 0x0000.0000. > * > * PCI configuration cycles look like this: > @@ -356,15 +356,14 @@ static u64 pre_mem_pci_sz; > * 7:2 register number > * > */ > -static DEFINE_RAW_SPINLOCK(v3_lock); > > #undef V3_LB_BASE_PREFETCH > #define V3_LB_BASE_PREFETCH 0 > > -static void __iomem *v3_open_config_window(struct pci_bus *bus, > - unsigned int devfn, int offset) > +static void v3_open_config_window(struct pci_bus *bus, unsigned int devfn, > + int offset) > { > - unsigned int address, mapaddress, busnr; > + unsigned int mapaddress, busnr; > > busnr = bus->number; > > @@ -381,14 +380,10 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, > /* > * local bus segment so need a type 0 config cycle > * > - * build the PCI configuration "address" with one-hot in > - * A31-A11 > - * > * mapaddress: > * 3:1 = config cycle (101) > * 0 = PCI A1 & A0 are 0 (0) > */ > - address = PCI_FUNC(devfn) << 8; > mapaddress = V3_LB_MAP_TYPE_CONFIG; > > if (slot > 12) > @@ -396,26 +391,15 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, > * high order bits are handled by the MAP register > */ > mapaddress |= 1 << (slot - 5); > - else > - /* > - * low order bits handled directly in the address > - */ > - address |= 1 << (slot + 11); > } else { > /* > * not the local bus segment so need a type 1 config cycle > * > - * address: > - * 23:16 = bus number > - * 15:11 = slot number (7:3 of devfn) > - * 10:8 = func number (2:0 of devfn) > - * > * mapaddress: > * 3:1 = config cycle (101) > * 0 = PCI A1 & A0 from host bus (1) > */ > mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN; > - address = (busnr << 16) | (devfn << 8); > } > > /* > @@ -432,8 +416,6 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, > v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) | > V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE); > v3_writew(V3_LB_MAP1, mapaddress); > - > - return PCI_CONFIG_VADDR + address + offset; > } > > static void v3_close_config_window(void) > @@ -454,70 +436,66 @@ static void v3_close_config_window(void) > V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); > } > > -static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, > - int size, u32 *val) > +static void __iomem *v3_map_bus(struct pci_bus *bus, > + unsigned int devfn, int offset) > { > - void __iomem *addr; > - unsigned long flags; > - u32 v; > + unsigned int busnr = bus->number; > + unsigned int address; > > - raw_spin_lock_irqsave(&v3_lock, flags); > - addr = v3_open_config_window(bus, devfn, where); > - > - switch (size) { > - case 1: > - v = __raw_readb(addr); > - break; > + if (busnr == 0) { > + int slot = PCI_SLOT(devfn); > > - case 2: > - v = __raw_readw(addr); > - break; > + /* > + * build the PCI configuration "address" with function in > + * A10-A8 and device one-hot in A31-A11 > + */ > + address = PCI_FUNC(devfn) << 8; > > - default: > - v = __raw_readl(addr); > - break; > + /* > + * high order bits are handled by the MAP register; > + * low order bits handled directly in the address > + */ > + if (slot <= 12) > + address |= 1 << (slot + 11); > + } else { > + /* > + * not the local bus segment so need a type 1 config cycle > + * > + * address: > + * 23:16 = bus number > + * 15:11 = slot number (7:3 of devfn) > + * 10:8 = func number (2:0 of devfn) > + */ > + address = (busnr << 16) | (devfn << 8); > } > > - v3_close_config_window(); > - raw_spin_unlock_irqrestore(&v3_lock, flags); > + return PCI_CONFIG_VADDR + address + offset; > +} > + > +static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, > + int size, u32 *val) > +{ > + int ret; > > - *val = v; > - return PCIBIOS_SUCCESSFUL; > + v3_open_config_window(); > + ret = pci_generic_config_read(bus, devfn, where, size, val); > + v3_close_config_window(); > + return ret; > } > > static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, > int size, u32 val) > { > - void __iomem *addr; > - unsigned long flags; > - > - raw_spin_lock_irqsave(&v3_lock, flags); > - addr = v3_open_config_window(bus, devfn, where); > - > - switch (size) { > - case 1: > - __raw_writeb((u8)val, addr); > - __raw_readb(addr); > - break; > - > - case 2: > - __raw_writew((u16)val, addr); > - __raw_readw(addr); > - break; > - > - case 4: > - __raw_writel(val, addr); > - __raw_readl(addr); > - break; > - } > + int ret; > > + v3_open_config_window(); > + ret = pci_generic_config_write(bus, devfn, where, size, val); > v3_close_config_window(); > - raw_spin_unlock_irqrestore(&v3_lock, flags); > - > - return PCIBIOS_SUCCESSFUL; > + return ret; > } > > static struct pci_ops pci_v3_ops = { > + .map_bus = v3_map_bus, > .read = v3_read_config, > .write = v3_write_config, > }; > @@ -672,8 +650,6 @@ static void __init pci_v3_preinit(void) > hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); > hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); > > - raw_spin_lock_irqsave(&v3_lock, flags); > - > /* > * Unlock V3 registers, but only if they were previously locked. > */ > @@ -736,8 +712,6 @@ static void __init pci_v3_preinit(void) > v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); > v3_writeb(V3_LB_IMASK, 0x28); > __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); > - > - raw_spin_unlock_irqrestore(&v3_lock, flags); > } > > static void __init pci_v3_postinit(void) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 26, 2015 at 7:22 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: > On Thu, Jan 22, 2015 at 02:33:36PM -0600, Bjorn Helgaas wrote: >> On Mon, Jan 12, 2015 at 01:05:12AM +0100, Linus Walleij wrote: >> > On Sat, Jan 10, 2015 at 10:53 PM, Arnd Bergmann <arnd@arndb.de> wrote: >> > > On Saturday 10 January 2015 22:40:22 Linus Walleij wrote: >> > >> > static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, >> > >> > int size, u32 *val) >> > >> > { >> > >> > - addr = v3_open_config_window(bus, devfn, where); >> > >> > + int ret = pci_generic_config_read(bus, devfn, where, size, val); >> > >> > v3_close_config_window(); >> > >> > + return ret; >> > >> > } >> > >> > >> > >> > static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, >> > >> > int size, u32 val) >> > >> > { >> > >> > + int ret = pci_generic_config_write(bus, devfn, where, size, val); >> > >> > v3_close_config_window(); >> > >> > - raw_spin_unlock_irqrestore(&v3_lock, flags); >> > >> > + return ret; >> > >> > } >> > >> > >> > >> > static struct pci_ops pci_v3_ops = { >> > >> > + .map_bus = v3_open_config_window, >> > >> > .read = v3_read_config, >> > >> > .write = v3_write_config, >> > >> >> > >> So .map_bus is called before every .read/.write operation I take it. >> > >> >> > >> Wouldn't it be proper to call the v3_close_config_window() from a >> > >> matching .unmap_bus() callback for symmetry? >> > > >> > > It would be nicer for integrator but useless for anything else, so >> > > I'd vote for leaving it the way Rob posted. >> > >> > OK I buy that, throw in a comment about it in the code if there >> > is some time for iterating the patch. >> >> Would you prefer something like the following instead? It keeps the >> v3_open/close symmetry, but it does break apart and duplicate some of the >> logic from v3_open_config_window(). > > Hearing nothing, I kept Rob's initial version. It can be tweaked later if > anybody wants to. I just want to get all this into v3.20. Sorry, I'm OK with either version, this latest iteration looks very nice. Acked-by. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index c186a17c2cff..c1098729cf8a 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -324,7 +324,7 @@ static u64 pre_mem_pci_sz; * configuration address space, you present the V3 with the following pattern * (which is very nearly a type 1 (except that the lower two bits are 00 and * not 01). In order for this mapping to work you need to set up one of - * the local to PCI aperatures to 16Mbytes in length translating to + * the local to PCI apertures to 16Mbytes in length translating to * PCI configuration space starting at 0x0000.0000. * * PCI configuration cycles look like this: @@ -356,15 +356,14 @@ static u64 pre_mem_pci_sz; * 7:2 register number * */ -static DEFINE_RAW_SPINLOCK(v3_lock); #undef V3_LB_BASE_PREFETCH #define V3_LB_BASE_PREFETCH 0 -static void __iomem *v3_open_config_window(struct pci_bus *bus, - unsigned int devfn, int offset) +static void v3_open_config_window(struct pci_bus *bus, unsigned int devfn, + int offset) { - unsigned int address, mapaddress, busnr; + unsigned int mapaddress, busnr; busnr = bus->number; @@ -381,14 +380,10 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, /* * local bus segment so need a type 0 config cycle * - * build the PCI configuration "address" with one-hot in - * A31-A11 - * * mapaddress: * 3:1 = config cycle (101) * 0 = PCI A1 & A0 are 0 (0) */ - address = PCI_FUNC(devfn) << 8; mapaddress = V3_LB_MAP_TYPE_CONFIG; if (slot > 12) @@ -396,26 +391,15 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, * high order bits are handled by the MAP register */ mapaddress |= 1 << (slot - 5); - else - /* - * low order bits handled directly in the address - */ - address |= 1 << (slot + 11); } else { /* * not the local bus segment so need a type 1 config cycle * - * address: - * 23:16 = bus number - * 15:11 = slot number (7:3 of devfn) - * 10:8 = func number (2:0 of devfn) - * * mapaddress: * 3:1 = config cycle (101) * 0 = PCI A1 & A0 from host bus (1) */ mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN; - address = (busnr << 16) | (devfn << 8); } /* @@ -432,8 +416,6 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) | V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP1, mapaddress); - - return PCI_CONFIG_VADDR + address + offset; } static void v3_close_config_window(void) @@ -454,70 +436,66 @@ static void v3_close_config_window(void) V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); } -static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) +static void __iomem *v3_map_bus(struct pci_bus *bus, + unsigned int devfn, int offset) { - void __iomem *addr; - unsigned long flags; - u32 v; + unsigned int busnr = bus->number; + unsigned int address; - raw_spin_lock_irqsave(&v3_lock, flags); - addr = v3_open_config_window(bus, devfn, where); - - switch (size) { - case 1: - v = __raw_readb(addr); - break; + if (busnr == 0) { + int slot = PCI_SLOT(devfn); - case 2: - v = __raw_readw(addr); - break; + /* + * build the PCI configuration "address" with function in + * A10-A8 and device one-hot in A31-A11 + */ + address = PCI_FUNC(devfn) << 8; - default: - v = __raw_readl(addr); - break; + /* + * high order bits are handled by the MAP register; + * low order bits handled directly in the address + */ + if (slot <= 12) + address |= 1 << (slot + 11); + } else { + /* + * not the local bus segment so need a type 1 config cycle + * + * address: + * 23:16 = bus number + * 15:11 = slot number (7:3 of devfn) + * 10:8 = func number (2:0 of devfn) + */ + address = (busnr << 16) | (devfn << 8); } - v3_close_config_window(); - raw_spin_unlock_irqrestore(&v3_lock, flags); + return PCI_CONFIG_VADDR + address + offset; +} + +static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + int ret; - *val = v; - return PCIBIOS_SUCCESSFUL; + v3_open_config_window(); + ret = pci_generic_config_read(bus, devfn, where, size, val); + v3_close_config_window(); + return ret; } static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - void __iomem *addr; - unsigned long flags; - - raw_spin_lock_irqsave(&v3_lock, flags); - addr = v3_open_config_window(bus, devfn, where); - - switch (size) { - case 1: - __raw_writeb((u8)val, addr); - __raw_readb(addr); - break; - - case 2: - __raw_writew((u16)val, addr); - __raw_readw(addr); - break; - - case 4: - __raw_writel(val, addr); - __raw_readl(addr); - break; - } + int ret; + v3_open_config_window(); + ret = pci_generic_config_write(bus, devfn, where, size, val); v3_close_config_window(); - raw_spin_unlock_irqrestore(&v3_lock, flags); - - return PCIBIOS_SUCCESSFUL; + return ret; } static struct pci_ops pci_v3_ops = { + .map_bus = v3_map_bus, .read = v3_read_config, .write = v3_write_config, }; @@ -672,8 +650,6 @@ static void __init pci_v3_preinit(void) hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); - raw_spin_lock_irqsave(&v3_lock, flags); - /* * Unlock V3 registers, but only if they were previously locked. */ @@ -736,8 +712,6 @@ static void __init pci_v3_preinit(void) v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); - - raw_spin_unlock_irqrestore(&v3_lock, flags); } static void __init pci_v3_postinit(void)