From patchwork Mon Jan 18 17:21:12 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [52/64] alim15x3: fix handling of command timings Date: Mon, 18 Jan 2010 07:21:12 -0000 From: Bartlomiej Zolnierkiewicz X-Patchwork-Id: 43114 Message-Id: <20100118172112.14623.45532.sendpatchset@localhost> To: linux-ide@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org From: Bartlomiej Zolnierkiewicz Subject: [PATCH] alim15x3: fix handling of command timings Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Index: b/drivers/ide/alim15x3.c =================================================================== --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -84,14 +84,18 @@ static void ali_set_pio_mode(ide_hwif_t struct ide_timing p; ide_timing_compute(pair, pair->pio_mode, &p, T, 1); - ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); if (pair->dma_mode) { ide_timing_compute(pair, pair->dma_mode, &p, T, 1); - ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP); + ide_timing_merge(&p, &t, &t, + IDE_TIMING_SETUP | IDE_TIMING_8BIT); } } t.setup = clamp_val(t.setup, 1, 8) & 7; + t.act8b = clamp_val(t.act8b, 1, 8) & 7; + t.rec8b = clamp_val(t.rec8b, 1, 16) & 15; t.active = clamp_val(t.active, 1, 8) & 7; t.recover = clamp_val(t.recover, 1, 16) & 15; @@ -101,6 +105,7 @@ static void ali_set_pio_mode(ide_hwif_t ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00); pci_write_config_byte(dev, port, t.setup); + pci_write_config_byte(dev, port + 1, (t.act8b << 4) | t.rec8b); pci_write_config_byte(dev, port + unit + 2, (t.active << 4) | t.recover); }