diff mbox

[v6] i2c: cadence: Check for errata condition involving master receive

Message ID 1421174099-19839-1-git-send-email-harinik@xilinx.com
State Accepted
Headers show

Commit Message

Harini Katakam Jan. 13, 2015, 6:34 p.m. UTC 
Cadence I2C controller has the following bugs:
- completion indication is not given to the driver at the end of
a read/receive transfer with HOLD bit set.
- Invalid read transaction are generated on the bus when HW timeout
condition occurs with HOLD bit set.

As a result of the above, if a set of messages to be transferred with
repeated start includes any message following a read message,
completion is never indicated and timeout occurs.
Hence a check is implemented to return -EOPNOTSUPP for such sequences.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: Vishnu Motghare <vishnum@xilinx.com>
---

v6:
- Correct if condition - add braces to include both statements.
- Modify comments and warning message.

v5:
Make warning grepable in driver.

v4:
Use single dev_warn and make message grep-able.

v3:
Add warning in case of unsupported transfer.

v2:
Dont defeteature repeated start. Just check for unsupported conditions in the
driver and return error.

---
 drivers/i2c/busses/i2c-cadence.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Wolfram Sang Jan. 14, 2015, 10:37 a.m. UTC | #1 
On Wed, Jan 14, 2015 at 12:04:59AM +0530, Harini Katakam wrote:
> Cadence I2C controller has the following bugs:
> - completion indication is not given to the driver at the end of
> a read/receive transfer with HOLD bit set.
> - Invalid read transaction are generated on the bus when HW timeout
> condition occurs with HOLD bit set.
> 
> As a result of the above, if a set of messages to be transferred with
> repeated start includes any message following a read message,
> completion is never indicated and timeout occurs.
> Hence a check is implemented to return -EOPNOTSUPP for such sequences.
> 
> Signed-off-by: Harini Katakam <harinik@xilinx.com>
> Signed-off-by: Vishnu Motghare <vishnum@xilinx.com>

Applied to for-next with some whitespace corrections, thanks!
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 5f5d4fa..c7be4fb 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -541,6 +541,19 @@  static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	 * processed with a repeated start.
 	 */
 	if (num > 1) {
+		/*
+		 * This controller does not give completion interrupt after a
+		 * master receive message if HOLD bit is set (repeated start),
+		 * resulting in SW timeout. Hence, if a receive message is
+		 * followed by any other message, an error is returned
+		 * indicating that this sequence is not supported.
+		 */
+		for (count = 0; count < num-1; count++) {
+			if (msgs[count].flags & I2C_M_RD) {
+				dev_warn(adap->dev.parent, "Can't do repeated start after a receive message\n");
+				return -EOPNOTSUPP;
+			}
+		}
 		id->bus_hold_flag = 1;
 		reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
 		reg |= CDNS_I2C_CR_HOLD;