diff mbox

[v3,09/13] ARM: dts: sun9i: Add pinmux setting for mmc0

Message ID 1421113055-17867-10-git-send-email-wens@csie.org
State New
Headers show

Commit Message

Chen-Yu Tsai Jan. 13, 2015, 1:37 a.m. UTC 
mmc0 is only available on port F, and is always used with a 4 bit wide
bus for the onboard micro-sd slot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Maxime Ripard Jan. 14, 2015, 4:40 p.m. UTC | #1 
On Tue, Jan 13, 2015 at 09:37:31AM +0800, Chen-Yu Tsai wrote:
> mmc0 is only available on port F, and is always used with a 4 bit wide
> bus for the onboard micro-sd slot.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>

Applied, thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index a31dff35d15b..7387fb2a5111 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -470,6 +470,14 @@ 
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc0_pins: mmc0 {
+				allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PH12", "PH13";
 				allwinner,function = "uart0";