| Message ID | 1420611244-25624-1-git-send-email-jiang.liu@linux.intel.com |
|---|---|
| State | Not Applicable |
| Headers | show |
On Wed, Jan 07, 2015 at 02:13:49PM +0800, Jiang Liu wrote: > Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code") > breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke > setup_IO_APIC(), so no irqdomains created for IOAPICs and > mp_map_pin_to_irq() fails at the very beginning. > --- a/arch/x86/kernel/apic/io_apic.c > +++ b/arch/x86/kernel/apic/io_apic.c > @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx) > ioapics[idx].pin_info = NULL; > } > > -void __init setup_IO_APIC(void) > +void __init setup_IO_APIC(bool xen_smp) > { > int ioapic; > > - /* > - * calling enable_IO_APIC() is moved to setup_local_APIC for BP > - */ > - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; > + if (!xen_smp) { > + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); > + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; > + > + /* Set up IO-APIC IRQ routing. */ > + x86_init.mpparse.setup_ioapic_ids(); > + sync_Arb_IDs(); > + } Is there a specific reason that this cannot run in all cases? What I am asking is why are we doing a special case here? The description at the top implied that we were just missing an call to setup_IO_APIC.. > > - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); > for_each_ioapic(ioapic) > BUG_ON(mp_irqdomain_create(ioapic)); > - > - /* > - * Set up IO-APIC IRQ routing. > - */ > - x86_init.mpparse.setup_ioapic_ids(); > - > - sync_Arb_IDs(); > setup_IO_APIC_irqs(); > - init_IO_APIC_traps(); > - if (nr_legacy_irqs()) > - check_timer(); > - > ioapic_initialized = 1; > + > + if (!xen_smp) { > + init_IO_APIC_traps(); > + if (nr_legacy_irqs()) > + check_timer(); > + } > } > > /* > diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c > index 4c071aeb8417..7eb0283901fa 100644 > --- a/arch/x86/xen/smp.c > +++ b/arch/x86/xen/smp.c > @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) > > xen_raw_printk(m); > panic(m); > + } else { > + setup_IO_APIC(true); > } > + > xen_init_lock_cpu(0); > > smp_store_boot_cpu_info(); > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2015/1/7 22:50, Konrad Rzeszutek Wilk wrote: > On Wed, Jan 07, 2015 at 02:13:49PM +0800, Jiang Liu wrote: >> Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code") >> breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke >> setup_IO_APIC(), so no irqdomains created for IOAPICs and >> mp_map_pin_to_irq() fails at the very beginning. >> --- a/arch/x86/kernel/apic/io_apic.c >> +++ b/arch/x86/kernel/apic/io_apic.c >> @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx) >> ioapics[idx].pin_info = NULL; >> } >> >> -void __init setup_IO_APIC(void) >> +void __init setup_IO_APIC(bool xen_smp) >> { >> int ioapic; >> >> - /* >> - * calling enable_IO_APIC() is moved to setup_local_APIC for BP >> - */ >> - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; >> + if (!xen_smp) { >> + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); >> + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; >> + >> + /* Set up IO-APIC IRQ routing. */ >> + x86_init.mpparse.setup_ioapic_ids(); >> + sync_Arb_IDs(); >> + } > > > Is there a specific reason that this cannot run in all cases? > > What I am asking is why are we doing a special case here? The description > at the top implied that we were just missing an call to > setup_IO_APIC.. Hi Konrad, I'm not very familiar with Xen IRQ yet, so I just enabled the code to create irqdomains for IOAPICs and keep other part as is. I will try to check whether we could enable other part all together:) Regards! Gerry > >> >> - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); >> for_each_ioapic(ioapic) >> BUG_ON(mp_irqdomain_create(ioapic)); >> - >> - /* >> - * Set up IO-APIC IRQ routing. >> - */ >> - x86_init.mpparse.setup_ioapic_ids(); >> - >> - sync_Arb_IDs(); >> setup_IO_APIC_irqs(); >> - init_IO_APIC_traps(); >> - if (nr_legacy_irqs()) >> - check_timer(); >> - >> ioapic_initialized = 1; >> + >> + if (!xen_smp) { >> + init_IO_APIC_traps(); >> + if (nr_legacy_irqs()) >> + check_timer(); >> + } >> } >> >> /* >> diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c >> index 4c071aeb8417..7eb0283901fa 100644 >> --- a/arch/x86/xen/smp.c >> +++ b/arch/x86/xen/smp.c >> @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) >> >> xen_raw_printk(m); >> panic(m); >> + } else { >> + setup_IO_APIC(true); >> } >> + >> xen_init_lock_cpu(0); >> >> smp_store_boot_cpu_info(); >> -- >> 1.7.10.4 >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jan 07, 2015 at 11:37:52PM +0800, Jiang Liu wrote: > On 2015/1/7 22:50, Konrad Rzeszutek Wilk wrote: > > On Wed, Jan 07, 2015 at 02:13:49PM +0800, Jiang Liu wrote: > >> Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code") > >> breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke > >> setup_IO_APIC(), so no irqdomains created for IOAPICs and > >> mp_map_pin_to_irq() fails at the very beginning. > >> --- a/arch/x86/kernel/apic/io_apic.c > >> +++ b/arch/x86/kernel/apic/io_apic.c > >> @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx) > >> ioapics[idx].pin_info = NULL; > >> } > >> > >> -void __init setup_IO_APIC(void) > >> +void __init setup_IO_APIC(bool xen_smp) > >> { > >> int ioapic; > >> > >> - /* > >> - * calling enable_IO_APIC() is moved to setup_local_APIC for BP > >> - */ > >> - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; > >> + if (!xen_smp) { > >> + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); > >> + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; > >> + > >> + /* Set up IO-APIC IRQ routing. */ > >> + x86_init.mpparse.setup_ioapic_ids(); > >> + sync_Arb_IDs(); > >> + } > > > > > > Is there a specific reason that this cannot run in all cases? > > > > What I am asking is why are we doing a special case here? The description > > at the top implied that we were just missing an call to > > setup_IO_APIC.. > Hi Konrad, > I'm not very familiar with Xen IRQ yet, so I just enabled the > code to create irqdomains for IOAPICs and keep other part as is. I will > try to check whether we could enable other part all together:) If you want you can (privately) send me (or Sander) and patch that I would be happy to test out. It is quite amusing that I have not used the power button for quite a while - I always rebooting the machine to install a new kernel :-) > Regards! > Gerry > > > > >> > >> - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); > >> for_each_ioapic(ioapic) > >> BUG_ON(mp_irqdomain_create(ioapic)); > >> - > >> - /* > >> - * Set up IO-APIC IRQ routing. > >> - */ > >> - x86_init.mpparse.setup_ioapic_ids(); > >> - > >> - sync_Arb_IDs(); > >> setup_IO_APIC_irqs(); > >> - init_IO_APIC_traps(); > >> - if (nr_legacy_irqs()) > >> - check_timer(); > >> - > >> ioapic_initialized = 1; > >> + > >> + if (!xen_smp) { > >> + init_IO_APIC_traps(); > >> + if (nr_legacy_irqs()) > >> + check_timer(); > >> + } > >> } > >> > >> /* > >> diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c > >> index 4c071aeb8417..7eb0283901fa 100644 > >> --- a/arch/x86/xen/smp.c > >> +++ b/arch/x86/xen/smp.c > >> @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) > >> > >> xen_raw_printk(m); > >> panic(m); > >> + } else { > >> + setup_IO_APIC(true); > >> } > >> + > >> xen_init_lock_cpu(0); > >> > >> smp_store_boot_cpu_info(); > >> -- > >> 1.7.10.4 > >> > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2015/1/7 23:44, Konrad Rzeszutek Wilk wrote: > On Wed, Jan 07, 2015 at 11:37:52PM +0800, Jiang Liu wrote: >> On 2015/1/7 22:50, Konrad Rzeszutek Wilk wrote: >>> On Wed, Jan 07, 2015 at 02:13:49PM +0800, Jiang Liu wrote: >>>> Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code") >>>> breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke >>>> setup_IO_APIC(), so no irqdomains created for IOAPICs and >>>> mp_map_pin_to_irq() fails at the very beginning. >>>> --- a/arch/x86/kernel/apic/io_apic.c >>>> +++ b/arch/x86/kernel/apic/io_apic.c >>>> @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx) >>>> ioapics[idx].pin_info = NULL; >>>> } >>>> >>>> -void __init setup_IO_APIC(void) >>>> +void __init setup_IO_APIC(bool xen_smp) >>>> { >>>> int ioapic; >>>> >>>> - /* >>>> - * calling enable_IO_APIC() is moved to setup_local_APIC for BP >>>> - */ >>>> - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; >>>> + if (!xen_smp) { >>>> + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); >>>> + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; >>>> + >>>> + /* Set up IO-APIC IRQ routing. */ >>>> + x86_init.mpparse.setup_ioapic_ids(); >>>> + sync_Arb_IDs(); >>>> + } Hi Konrad, Enabling above code for Xen dom0 will cause following warning because it writes a special value to ICR register. [ 3.394981] ------------[ cut here ]------------ [ 3.394985] WARNING: CPU: 0 PID: 1 at arch/x86/xen/enlighten.c:968 xen_apic_write+0x15/0x20() [ 3.394988] Modules linked in: [ 3.394991] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc3+ #5 [ 3.394993] Hardware name: Dell Inc. OptiPlex 9020/0DNKMN, BIOS A03 09/17/2013 [ 3.394996] 00000000000003c8 ffff88003056bdd8 ffffffff817611bb 00000000000003c8 [ 3.395000] 0000000000000000 ffff88003056be18 ffffffff8106f4ea 0000000000000008 [ 3.395004] ffffffff81fc1120 ffff880030561348 000000000000a108 000000000000a101 [ 3.395008] Call Trace: [ 3.395012] [<ffffffff817611bb>] dump_stack+0x4f/0x6c [ 3.395015] [<ffffffff8106f4ea>] warn_slowpath_common+0xaa/0xd0 [ 3.395018] [<ffffffff8106f525>] warn_slowpath_null+0x15/0x20 [ 3.395021] [<ffffffff81003e25>] xen_apic_write+0x15/0x20 [ 3.395026] [<ffffffff81ef606b>] sync_Arb_IDs+0x84/0x86 [ 3.395029] [<ffffffff81ef7f7a>] setup_IO_APIC+0x7f/0x8e3 [ 3.395033] [<ffffffff810b275d>] ? trace_hardirqs_on+0xd/0x10 [ 3.395036] [<ffffffff8176858a>] ? _raw_spin_unlock_irqrestore+0x8a/0xa0 [ 3.395040] [<ffffffff81ee841b>] xen_smp_prepare_cpus+0x5d/0x184 [ 3.395044] [<ffffffff81ee1ba3>] kernel_init_freeable+0x149/0x293 [ 3.395047] [<ffffffff81758d49>] ? kernel_init+0x9/0xf0 [ 3.395049] [<ffffffff81758d40>] ? rest_init+0xd0/0xd0 [ 3.395052] [<ffffffff81758d49>] kernel_init+0x9/0xf0 [ 3.395054] [<ffffffff8176887c>] ret_from_fork+0x7c/0xb0 [ 3.395057] [<ffffffff81758d40>] ? rest_init+0xd0/0xd0 [ 3.395066] ---[ end trace 7c4371c8ba33d5d0 ]--- <snit> >>>> ioapic_initialized = 1; >>>> + >>>> + if (!xen_smp) { >>>> + init_IO_APIC_traps(); >>>> + if (nr_legacy_irqs()) >>>> + check_timer(); >>>> + } >>>> } And enabling above code causes Xen dom0 reboots. Haven't test HVM and PV kernel yet. So seems we still need special treatment for xen here. Regards! Gerry >>>> >>>> /* >>>> diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c >>>> index 4c071aeb8417..7eb0283901fa 100644 >>>> --- a/arch/x86/xen/smp.c >>>> +++ b/arch/x86/xen/smp.c >>>> @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) >>>> >>>> xen_raw_printk(m); >>>> panic(m); >>>> + } else { >>>> + setup_IO_APIC(true); >>>> } >>>> + >>>> xen_init_lock_cpu(0); >>>> >>>> smp_store_boot_cpu_info(); >>>> -- >>>> 1.7.10.4 >>>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> Please read the FAQ at http://www.tux.org/lkml/ >>> > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Wednesday, January 7, 2015, 7:13:49 AM, you wrote: > Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code") > breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke > setup_IO_APIC(), so no irqdomains created for IOAPICs and > mp_map_pin_to_irq() fails at the very beginning. > Enhance xen_smp_prepare_cpus() to call setup_IO_APIC() to initialize > irqdomain for IOAPICs. > Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> > Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> > Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > --- > Hi all, > This patch should be backported to v3.17, but there are > conflicts. So I will send backported patch to 3.17/3.18 stable tree > once this patch has been merged into mainstream kernel. > Thanks! > Gerry Hi Gerry / Konrad / Thomas, This patch doesn't apply cleanly to current linux-tip. Unfortunately the "Tested-by" seems only valid for the intel hardware i have (intel NUC). Testing on AMD delivered some interesting results: - Under Xen: Host freeze early in dom0 kernel boot, unfortunately no more info. - On baremetal with iommu enabled and ivrs_ioapic[6]=00:14.0 ivrs_hpet[0]=00:14.0 as commandline override for a borked bios: It doesn't boot and spits out: [ 0.339811] AMD-Vi: Command-line override present for HPET id 0 - ignoring [ 0.460563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.511535] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC [ 0.537042] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc3-20150110-pciback-doflr-apic-fixed+ #1 [ 0.564887] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [ 0.588558] ffff88054b00c000 ffff880547d8fda8 ffffffff81bb3fc9 ffff880547db0000 [ 0.610722] ffffffff81f20070 ffff880547d8fe28 ffffffff81baeeb9 ffff880547d8fde8 [ 0.632886] ffffffff00000008 ffff880547d8fe38 ffff880547d8fdd8 00000000fffea093 [ 0.655052] Call Trace: [ 0.662349] [<ffffffff81bb3fc9>] dump_stack+0x45/0x57 [ 0.677712] [<ffffffff81baeeb9>] panic+0xcd/0x212 [ 0.692026] [<ffffffff81583187>] panic_if_irq_remap+0x17/0x20 [ 0.709460] [<ffffffff8233c634>] setup_IO_APIC+0x2bb/0x74c [ 0.726112] [<ffffffff8233a04a>] native_smp_prepare_cpus+0x2c9/0x35a [ 0.745365] [<ffffffff82328200>] kernel_init_freeable+0x153/0x298 [ 0.763839] [<ffffffff81baa589>] ? kernel_init+0x9/0xf0 [ 0.779712] [<ffffffff810e82bb>] ? finish_task_switch+0x8b/0x100 [ 0.797937] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0 [ 0.813549] [<ffffffff81baa589>] kernel_init+0x9/0xf0 [ 0.828904] [<ffffffff81bbf8bc>] ret_from_fork+0x7c/0xb0 [ 0.845036] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0 [ 0.860660] ---[ end Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC - On baremetal with iommu enabled and without the commandline overrides: It boots, but iommu is disabled (as expected) but i also get this lockdep trace: [ 0.339808] [Firmware Bug]: AMD-Vi: IOAPIC[6] not in IVRS table [ 0.357519] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found [ 0.375220] AMD-Vi: Disabling interrupt remapping [ 0.389723] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.440685] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.458128] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.476602] ..... (found apic 0 pin 2) ... [ 0.488834] ------------[ cut here ]------------ [ 0.502631] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2744 lockdep_trace_alloc+0x12c/0x140() [ 0.530215] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 0.546347] Modules linked in: [ 0.556006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc3-20150110-pciback-doflr-apic-fixed+ #1 [ 0.583839] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [ 0.607512] ffffffff81f2408e ffff880547d8fcd8 ffffffff81bb3fc9 ffff880547db0000 [ 0.629675] ffff880547d8fd28 ffff880547d8fd18 ffffffff810c738d ffff880547d8fd08 [ 0.651840] ffff880547db0000 0000000000000086 0000000000000080 0000000000000000 [ 0.674004] Call Trace: [ 0.681302] [<ffffffff81bb3fc9>] dump_stack+0x45/0x57 [ 0.696653] [<ffffffff810c738d>] warn_slowpath_common+0x8d/0xd0 [ 0.714605] [<ffffffff810c7471>] warn_slowpath_fmt+0x41/0x50 [ 0.731780] [<ffffffff8110e2c2>] ? vprintk_emit+0x312/0x5f0 [ 0.748692] [<ffffffff8110229c>] lockdep_trace_alloc+0x12c/0x140 [ 0.766906] [<ffffffff811b5a9f>] kmem_cache_alloc_node+0x3f/0x160 [ 0.785379] [<ffffffff8104573c>] ? __add_pin_to_irq_node+0x6c/0xc0 [ 0.804112] [<ffffffff8104573c>] __add_pin_to_irq_node+0x6c/0xc0 [ 0.822326] [<ffffffff8233c6c8>] setup_IO_APIC+0x34f/0x74c [ 0.838990] [<ffffffff8233a04a>] native_smp_prepare_cpus+0x2c9/0x35a [ 0.858243] [<ffffffff82328200>] kernel_init_freeable+0x153/0x298 [ 0.876719] [<ffffffff81baa589>] ? kernel_init+0x9/0xf0 [ 0.892602] [<ffffffff810e82bb>] ? finish_task_switch+0x8b/0x100 [ 0.910815] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0 [ 0.926428] [<ffffffff81baa589>] kernel_init+0x9/0xf0 [ 0.941782] [<ffffffff81bbf8bc>] ret_from_fork+0x7c/0xb0 [ 0.957913] [<ffffffff81baa580>] ? rest_init+0xc0/0xc0 [ 0.973531] ---[ end trace 5f14749f8239057a ]--- [ 1.020338] ....... works. Without this patch applied i don't see these issues (with or without the override). .config and dmesg of a baremetal boot without the commandline override is attached. -- Sander > --- > arch/x86/include/asm/io_apic.h | 2 +- > arch/x86/include/asm/smpboot_hooks.h | 5 ++--- > arch/x86/kernel/apic/apic.c | 5 ++--- > arch/x86/kernel/apic/io_apic.c | 32 +++++++++++++++----------------- > arch/x86/xen/smp.c | 3 +++ > 5 files changed, 23 insertions(+), 24 deletions(-) > diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h > index bf006cce9418..72a1298658bb 100644 > --- a/arch/x86/include/asm/io_apic.h > +++ b/arch/x86/include/asm/io_apic.h > @@ -237,7 +237,7 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned > > extern void io_apic_eoi(unsigned int apic, unsigned int vector); > > -extern void setup_IO_APIC(void); > +extern void setup_IO_APIC(bool xen_smp); > extern void enable_IO_APIC(void); > extern void disable_IO_APIC(void); > extern void setup_ioapic_dest(void); > diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h > index 0da7409f0bec..e47df710a588 100644 > --- a/arch/x86/include/asm/smpboot_hooks.h > +++ b/arch/x86/include/asm/smpboot_hooks.h > @@ -53,10 +53,9 @@ static inline void __init smpboot_setup_io_apic(void) > * go and set it up: > */ > if (!skip_ioapic_setup && nr_ioapics) > - setup_IO_APIC(); > - else { > + setup_IO_APIC(false); > + else > nr_ioapics = 0; > - } > #endif > } > > diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c > index 29b5b18afa27..71b8a6cb7f0e 100644 > --- a/arch/x86/kernel/apic/apic.c > +++ b/arch/x86/kernel/apic/apic.c > @@ -1913,10 +1913,9 @@ int __init APIC_init_uniprocessor(void) > > #ifdef CONFIG_X86_IO_APIC > if (smp_found_config && !skip_ioapic_setup && nr_ioapics) > - setup_IO_APIC(); > - else { > + setup_IO_APIC(false); > + else > nr_ioapics = 0; > - } > #endif > > x86_init.timers.setup_percpu_clockev(); > diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c > index 3f5f60406ab1..13cddc75e4c0 100644 > --- a/arch/x86/kernel/apic/io_apic.c > +++ b/arch/x86/kernel/apic/io_apic.c > @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx) > ioapics[idx].pin_info = NULL; > } > > -void __init setup_IO_APIC(void) > +void __init setup_IO_APIC(bool xen_smp) > { > int ioapic; > > - /* > - * calling enable_IO_APIC() is moved to setup_local_APIC for BP > - */ > - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; > + if (!xen_smp) { > + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); > + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; > + > + /* Set up IO-APIC IRQ routing. */ > + x86_init.mpparse.setup_ioapic_ids(); > + sync_Arb_IDs(); > + } > > - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); > for_each_ioapic(ioapic) > BUG_ON(mp_irqdomain_create(ioapic)); > - > - /* > - * Set up IO-APIC IRQ routing. > - */ > - x86_init.mpparse.setup_ioapic_ids(); > - > - sync_Arb_IDs(); > setup_IO_APIC_irqs(); > - init_IO_APIC_traps(); > - if (nr_legacy_irqs()) > - check_timer(); > - > ioapic_initialized = 1; > + > + if (!xen_smp) { > + init_IO_APIC_traps(); > + if (nr_legacy_irqs()) > + check_timer(); > + } > } > > /* > diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c > index 4c071aeb8417..7eb0283901fa 100644 > --- a/arch/x86/xen/smp.c > +++ b/arch/x86/xen/smp.c > @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) > > xen_raw_printk(m); > panic(m); > + } else { > + setup_IO_APIC(true); > } > + > xen_init_lock_cpu(0); > > smp_store_boot_cpu_info(); -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index bf006cce9418..72a1298658bb 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -237,7 +237,7 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned extern void io_apic_eoi(unsigned int apic, unsigned int vector); -extern void setup_IO_APIC(void); +extern void setup_IO_APIC(bool xen_smp); extern void enable_IO_APIC(void); extern void disable_IO_APIC(void); extern void setup_ioapic_dest(void); diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h index 0da7409f0bec..e47df710a588 100644 --- a/arch/x86/include/asm/smpboot_hooks.h +++ b/arch/x86/include/asm/smpboot_hooks.h @@ -53,10 +53,9 @@ static inline void __init smpboot_setup_io_apic(void) * go and set it up: */ if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); - else { + setup_IO_APIC(false); + else nr_ioapics = 0; - } #endif } diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 29b5b18afa27..71b8a6cb7f0e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1913,10 +1913,9 @@ int __init APIC_init_uniprocessor(void) #ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); - else { + setup_IO_APIC(false); + else nr_ioapics = 0; - } #endif x86_init.timers.setup_percpu_clockev(); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3f5f60406ab1..13cddc75e4c0 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2369,31 +2369,29 @@ static void ioapic_destroy_irqdomain(int idx) ioapics[idx].pin_info = NULL; } -void __init setup_IO_APIC(void) +void __init setup_IO_APIC(bool xen_smp) { int ioapic; - /* - * calling enable_IO_APIC() is moved to setup_local_APIC for BP - */ - io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; + if (!xen_smp) { + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; + + /* Set up IO-APIC IRQ routing. */ + x86_init.mpparse.setup_ioapic_ids(); + sync_Arb_IDs(); + } - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); for_each_ioapic(ioapic) BUG_ON(mp_irqdomain_create(ioapic)); - - /* - * Set up IO-APIC IRQ routing. - */ - x86_init.mpparse.setup_ioapic_ids(); - - sync_Arb_IDs(); setup_IO_APIC_irqs(); - init_IO_APIC_traps(); - if (nr_legacy_irqs()) - check_timer(); - ioapic_initialized = 1; + + if (!xen_smp) { + init_IO_APIC_traps(); + if (nr_legacy_irqs()) + check_timer(); + } } /* diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 4c071aeb8417..7eb0283901fa 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -326,7 +326,10 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) xen_raw_printk(m); panic(m); + } else { + setup_IO_APIC(true); } + xen_init_lock_cpu(0); smp_store_boot_cpu_info();
Commit b81975eade8c ("x86, irq: Clean up irqdomain transition code") breaks xen IRQ allocation because xen_smp_prepare_cpus() doesn't invoke setup_IO_APIC(), so no irqdomains created for IOAPICs and mp_map_pin_to_irq() fails at the very beginning. Enhance xen_smp_prepare_cpus() to call setup_IO_APIC() to initialize irqdomain for IOAPICs. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> --- Hi all, This patch should be backported to v3.17, but there are conflicts. So I will send backported patch to 3.17/3.18 stable tree once this patch has been merged into mainstream kernel. Thanks! Gerry --- arch/x86/include/asm/io_apic.h | 2 +- arch/x86/include/asm/smpboot_hooks.h | 5 ++--- arch/x86/kernel/apic/apic.c | 5 ++--- arch/x86/kernel/apic/io_apic.c | 32 +++++++++++++++----------------- arch/x86/xen/smp.c | 3 +++ 5 files changed, 23 insertions(+), 24 deletions(-)