new file mode 100644
@@ -0,0 +1,37 @@
+Device tree bindings for ARM PL353 static memory controller
+
+PL353 static memory controller supports two kinds of memory
+interfaces. i.e NAND and SRAM/NOR interfaces.
+The actual devices are instantiated from the child nodes of pl353 smc node.
+
+Required properties:
+- compatible : Should be "arm,pl353-smc-r2p1"
+- reg : Controller registers map and length.
+- clock-names : List of input clock names - "memclk", "aclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+- address-cells : Address cells, must be 1.
+- size-cells : Size cells. Must be 1.
+
+Child nodes:
+ For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
+supported as child nodes.
+
+for nand partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+ pl353smcc_0: pl353smcc@e000e000 {
+ compatible = "arm,pl353-smcc-r2p1"
+ clock-names = "memclk", "aclk";
+ clocks = <&clkc 11>, <&clkc 44>;
+ reg = <0xe000e000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ nand_0: nand@e1000000 {
+ compatible = "arm,pl353-nand-r2p1"
+ reg = <0xe1000000 0x1000000>;
+ (...)
+ };
+ };
Add pl353 static memory controller devicetree binding information. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> --- Changes in v5: - Removed timing properties Changes in v4: - none Changes in v3: - none Changes in v2: - modified timing binding info as per onfi timing parameters - add suffix nano second as timing unit - modified the clock names as per the IP spec --- .../bindings/memory-controllers/pl353-smc.txt | 37 ++++++++++++++++++++ 1 files changed, 37 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt