@@ -818,6 +818,7 @@ static int mmc_startup(struct mmc *mmc)
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
int timeout = 1000;
+ bool has_parts = false;
#ifdef CONFIG_MMC_SPI_CRC_ON
if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
@@ -1006,13 +1007,41 @@ static int mmc_startup(struct mmc *mmc)
break;
}
+ /* store the partition info of emmc */
+ mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
+ if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
+ ext_csd[EXT_CSD_BOOT_MULT])
+ mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
+ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT)
+ mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
+
+ mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
+
+ mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
+
+ for (i = 0; i < 4; i++) {
+ int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
+ mmc->capacity_gp[i] = (ext_csd[idx + 2] << 16) +
+ (ext_csd[idx + 1] << 8) + ext_csd[idx];
+ mmc->capacity_gp[i] *=
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+ mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+ if (mmc->capacity_gp[i])
+ has_parts = true;
+ }
+
/*
* Host needs to enable ERASE_GRP_DEF bit if device is
* partitioned. This bit will be lost every time after a reset
* or power off. This will affect erase size.
*/
+ if (ext_csd[EXT_CSD_PARTITION_SETTING] &
+ EXT_CSD_PARTITION_SETTING_COMPLETED)
+ has_parts = true;
if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) &&
- (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB)) {
+ (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB))
+ has_parts = true;
+ if (has_parts) {
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_ERASE_GROUP_DEF, 1);
@@ -1048,27 +1077,6 @@ static int mmc_startup(struct mmc *mmc)
mmc->erase_grp_size = (erase_gsz + 1)
* (erase_gmul + 1);
}
-
- /* store the partition info of emmc */
- mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
- if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
- ext_csd[EXT_CSD_BOOT_MULT])
- mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
- if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT)
- mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
-
- mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
-
- mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
-
- for (i = 0; i < 4; i++) {
- int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
- mmc->capacity_gp[i] = (ext_csd[idx + 2] << 16) +
- (ext_csd[idx + 1] << 8) + ext_csd[idx];
- mmc->capacity_gp[i] *=
- ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
- mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
- }
}
err = mmc_set_capacity(mmc, mmc->part_num);
The eMMC spec mandates that the high-capacity group size definitions should be enabled when the device is partitioned (by setting ERASE_GROUP_DEF in EXT_CSD). The current test to determine when this is required misses a few cases. In particular a device may have been partitioned without setting the enhanced attribute on any partition or partitioning may be completed without creating any extra partitions. This change moves the code to set ERASE_GROUP_DEF to after reading all partition information. It is also enabled when PARTITIONING_SETTING_COMPLETED is set as it is necessary to enable ERASE_GROUP_DEF before setting that bit, so it means that the user previously switched to the high capacity definitions. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com> --- drivers/mmc/mmc.c | 52 ++++++++++++++++++++++++++++++---------------------- 1 file changed, 30 insertions(+), 22 deletions(-)