new file mode 100644
@@ -0,0 +1,37 @@
+#!/bin/sh
+DAEMON=/usr/sbin/hostapd
+NAME=hostapd
+DESC="HOSTAP Daemon"
+ARGS="/etc/hostapd.conf -B"
+
+test -f $DAEMON || exit 0
+
+set -e
+
+case "$1" in
+ start)
+ echo -n "Starting $DESC: "
+ start-stop-daemon -S -x $DAEMON -- $ARGS
+ echo "$NAME."
+ ;;
+ stop)
+ echo -n "Stopping $DESC: "
+ start-stop-daemon -K -x $DAEMON
+ echo "$NAME."
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ ;;
+ reload)
+ echo -n "Reloading $DESC: "
+ killall -HUP $(basename ${DAEMON})
+ echo "$NAME."
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|restart|reload}"
+ exit 1
+ ;;
+esac
+
+exit 0
new file mode 100644
@@ -0,0 +1,133 @@
+--- hostapd/defconfig.orig 2014-07-30 11:26:22.599087301 +0200
++++ hostapd/defconfig 2014-07-30 11:27:26.175090018 +0200
+@@ -13,14 +13,24 @@
+ CONFIG_DRIVER_HOSTAP=y
+
+ # Driver interface for wired authenticator
+-#CONFIG_DRIVER_WIRED=y
++CONFIG_DRIVER_WIRED=y
+
+ # Driver interface for madwifi driver
+ #CONFIG_DRIVER_MADWIFI=y
+ #CFLAGS += -I../../madwifi # change to the madwifi source directory
+
++# Driver interface for Prism54 driver
++CONFIG_DRIVER_PRISM54=y
++
+ # Driver interface for drivers using the nl80211 kernel interface
+ CONFIG_DRIVER_NL80211=y
++CONFIG_LIBNL32=y
++# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
++# shipped with your distribution yet. If that is the case, you need to build
++# newer libnl version and point the hostapd build to use it.
++#LIBNL=/usr/src/libnl
++#CFLAGS += -I$(LIBNL)/include
++#LIBS += -L$(LIBNL)/lib
+
+ # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+ #CONFIG_DRIVER_BSD=y
+@@ -103,9 +113,7 @@
+ #CONFIG_EAP_FAST=y
+
+ # Wi-Fi Protected Setup (WPS)
+-#CONFIG_WPS=y
+-# Enable WSC 2.0 support
+-#CONFIG_WPS2=y
++CONFIG_WPS=y
+ # Enable UPnP support for external WPS Registrars
+ #CONFIG_WPS_UPNP=y
+
+@@ -121,7 +129,7 @@
+
+ # RADIUS authentication server. This provides access to the integrated EAP
+ # server from external hosts using RADIUS.
+-#CONFIG_RADIUS_SERVER=y
++CONFIG_RADIUS_SERVER=y
+
+ # Build IPv6 support for RADIUS operations
+ CONFIG_IPV6=y
+@@ -131,10 +139,10 @@
+
+ # Use the hostapd's IEEE 802.11 authentication (ACL), but without
+ # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+-#CONFIG_DRIVER_RADIUS_ACL=y
++CONFIG_DRIVER_RADIUS_ACL=y
+
+ # IEEE 802.11n (High Throughput) support
+-#CONFIG_IEEE80211N=y
++CONFIG_IEEE80211N=y
+
+ # Remove debugging code that is printing out debug messages to stdout.
+ # This can be used to reduce the size of the hostapd considerably if debugging
+--- hostapd/hostapd.conf.orig 2014-07-30 11:22:15.387076733 +0200
++++ hostapd/hostapd.conf 2014-07-30 11:25:17.555084520 +0200
+@@ -23,6 +23,7 @@
+ # Use driver=none if building hostapd as a standalone RADIUS server that does
+ # not control any wireless/wired driver.
+ # driver=hostap
++driver=nl80211
+
+ # hostapd event logger configuration
+ #
+@@ -83,7 +84,7 @@
+ ##### IEEE 802.11 related configuration #######################################
+
+ # SSID to be used in IEEE 802.11 management frames
+-ssid=test
++ssid=AP-Test
+
+ # Country code (ISO/IEC 3166-1). Used to set regulatory domain.
+ # Set as needed to indicate country in which device is operating.
+@@ -184,7 +185,7 @@
+ # Bit fields of allowed authentication algorithms:
+ # bit 0 = Open System Authentication
+ # bit 1 = Shared Key Authentication (requires WEP)
+-auth_algs=3
++auth_algs=1
+
+ # Send empty SSID in beacons and ignore probe request frames that do not
+ # specify full SSID, i.e., require stations to know SSID.
+@@ -679,7 +680,7 @@
+ # and/or WPA2 (full IEEE 802.11i/RSN):
+ # bit0 = WPA
+ # bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
+-#wpa=1
++wpa=1
+
+ # WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
+ # secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
+@@ -688,7 +689,7 @@
+ # wpa_psk (dot11RSNAConfigPSKValue)
+ # wpa_passphrase (dot11RSNAConfigPSKPassPhrase)
+ #wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
+-#wpa_passphrase=secret passphrase
++wpa_passphrase=1234
+
+ # Optionally, WPA PSKs can be read from a separate text file (containing list
+ # of (PSK,MAC address) pairs. This allows more than one PSK to be configured.
+@@ -701,6 +702,7 @@
+ # added to enable SHA256-based stronger algorithms.
+ # (dot11RSNAConfigAuthenticationSuitesTable)
+ #wpa_key_mgmt=WPA-PSK WPA-EAP
++wpa_key_mgmt=WPA-PSK
+
+ # Set of accepted cipher suites (encryption algorithms) for pairwise keys
+ # (unicast packets). This is a space separated list of algorithms:
+@@ -712,7 +714,7 @@
+ # TKIP will be used as the group cipher.
+ # (dot11RSNAConfigPairwiseCiphersTable)
+ # Pairwise cipher for WPA (v1) (default: TKIP)
+-#wpa_pairwise=TKIP CCMP
++wpa_pairwise=TKIP CCMP
+ # Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
+ #rsn_pairwise=CCMP
+
+@@ -730,7 +732,7 @@
+
+ # Maximum lifetime for PTK in seconds. This can be used to enforce rekeying of
+ # PTK to mitigate some attacks against TKIP deficiencies.
+-#wpa_ptk_rekey=600
++wpa_ptk_rekey=600
+
+ # Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up
+ # roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN
new file mode 100644
@@ -0,0 +1,39 @@
+DESCRIPTION = "User space daemon for extended IEEE 802.11 management"
+HOMEPAGE = "http://hostap.epitest.fi"
+LICENSE = "GPLv2 | BSD"
+
+SRC_URI = "http://hostap.epitest.fi/releases/hostapd-${PV}.tar.gz"
+SRC_URI += "file://init"
+SRC_URI += """
+ file://wlan.patch
+"""
+
+inherit c make
+
+LIBS = "libnl-3 libnl-genl-3 libssl libcrypto"
+DEPENDS += "${LIBS}"
+
+RDEPENDS += "libnl-3 libnl-genl-3 openssl crda"
+
+S = "${SRCDIR}/hostapd-${PV}/hostapd"
+
+CFLAGS += "-I${HOST_SYSROOT}${includedir}/libnl3"
+
+do_configure() {
+ install -m 0644 ${S}/defconfig ${S}/.config
+}
+
+do_install() {
+ install -d ${D}${sbindir} ${D}${sysconfdir}/init.d
+ install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir}
+ install -m 0755 ${S}/hostapd ${D}${sbindir}
+ install -m 0755 ${S}/hostapd_cli ${D}${sbindir}
+ install -m 755 ${SRCDIR}/init ${D}${sysconfdir}/init.d/hostapd
+}
+
+PACKAGE =+ "${PN}-conf"
+
+RDEPENDS_${PN} += "${LIBS}"
+
+FILES_${PN}-conf = "${sysconfdir}/hostapd.conf"
+
new file mode 100644
@@ -0,0 +1 @@
+4edf267bc5943a5f7d6d9c0abcce0973bfbad5fa hostapd-1.0.tar.gz