diff mbox

[08/14] boot/uboot/Config.in: Fix BR2_TARGET_UBOOT_SPL

Message ID 1418426171-3483-9-git-send-email-jkrause@posteo.de
State Accepted
Headers show

Commit Message

Jörg Krause Dec. 12, 2014, 11:16 p.m. UTC
Building an SPL image depends on the board configuration. This option
does not enable the SPL build, but only copies the built SPL image to
the binary images folder. The current help text is misleading.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
---
 boot/uboot/Config.in | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

Comments

Thomas Petazzoni Dec. 21, 2014, 10:23 p.m. UTC | #1
Dear Jörg Krause,

On Sat, 13 Dec 2014 00:16:05 +0100, Jörg Krause wrote:
> Building an SPL image depends on the board configuration. This option
> does not enable the SPL build, but only copies the built SPL image to
> the binary images folder. The current help text is misleading.
> 
> Signed-off-by: Jörg Krause <jkrause@posteo.de>
> ---
>  boot/uboot/Config.in | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)

Applied, thanks.

Thomas
diff mbox

Patch

diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index 8a5bebc..801ea2d 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -232,13 +232,15 @@  config BR2_TARGET_UBOOT_ETH1ADDR
 endif # BR2_TARGET_UBOOT_NETWORK
 
 config BR2_TARGET_UBOOT_SPL
-	bool "U-Boot SPL support"
+	bool "Install U-Boot SPL binary image"
 	depends on !BR2_TARGET_XLOADER
 	help
-	  Enable the U-Boot SPL support. SPL is a first stage
-	  bootloader loaded into internal memory in charge of
-	  enabling and configuring the external memory (DDR),
-	  and load the u-boot program into DDR.
+	  Install the U-Boot SPL binary image to the images
+	  directory.
+	  SPL is a first stage bootloader loaded into internal
+	  memory in charge of enabling and configuring the
+	  external memory (DDR), and load the u-boot program
+	  into DDR.
 
 config BR2_TARGET_UBOOT_SPL_NAME
 	string "U-Boot SPL target name"