@@ -24,6 +24,11 @@ Optional properties:
- vcc10-supply: The input supply for LDO_REG6
- vcc11-supply: The input supply for LDO_REG8
- vcc12-supply: The input supply for SWITCH_REG2
+- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
+ for 2 host gpio's used for dvs. The format of the gpio specifier depends in
+ the gpio controller.
+- dvsok-gpios: if we use dvs gpio to control buck1/2, this gpio will be pull
+ high, once RK808 completed the adjustment of voltage.
Regulators: All the regulators of RK808 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
@@ -55,7 +60,10 @@ Example:
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &dvs_ok &dvs_1 &dvs_2>;
+ dvsok-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
add the description about dvs1, dvs2, dvsok, and add the example. Signed-off-by: Chris Zhong <zyw@rock-chips.com> --- Documentation/devicetree/bindings/mfd/rk808.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)