| Message ID | 1418038147-13221-6-git-send-email-josh.wu@atmel.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hi Josh, Thank you for the patch. On Monday 08 December 2014 19:29:07 Josh Wu wrote: > Add the document for ov2640 dt. > > Cc: devicetree@vger.kernel.org > Signed-off-by: Josh Wu <josh.wu@atmel.com> > --- > v1 -> v2: > 1. change the compatible string to be consistent with verdor file. That's nice, but you still need to send a patch to add the ovti vendor prefix to Documentation/devicetree/bindings/vendor-prefixes.txt. It's not there yet. > 2. change the clock and pins' name. > 3. add missed pinctrl in example. > > .../devicetree/bindings/media/i2c/ov2640.txt | 44 +++++++++++++++++++ > 1 file changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt > b/Documentation/devicetree/bindings/media/i2c/ov2640.txt new file mode > 100644 > index 0000000..15be3cb > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt > @@ -0,0 +1,44 @@ > +* Omnivision ov2640 CMOS sensor > + > +The Omnivision OV2640 sensor support multiple resolutions output, such as > +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB > +output format. > + > +Required Properties : > +- compatible: Must be "ovti,ov2640" > +- clocks: reference master clock, if using external fixed clock, you > + no need to have such property. That's not true anymore, the clocks property is mandatory in all cases. Just describe it as - clocks: reference to the xvclk input clock. > +- clock-names: Must be "xvclk", it means the master clock for ov2640. I would drop "it means the master clock for ov2640". > +Optional Properties: > +- resetb-gpios: reset pin - resetb-gpios: reference to the GPIO connected to the resetb pin, if any. > +- pwdn-gpios: power down pin - pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any. > + > +The device node must contain one 'port' child node for its digital output > +video port, in accordance with the video interface bindings defined in > +Documentation/devicetree/bindings/media/video-interfaces.txt. > + > +Example: > + > + i2c1: i2c@f0018000 { > + ov2640: camera@0x30 { > + compatible = "ovti,ov2640"; > + reg = <0x30>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_reset>; > + > + resetb-gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; > + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; > + > + clocks = <&pck1>; > + clock-names = "xvclk"; > + > + port { > + ov2640_0: endpoint { > + remote-endpoint = <&isi_0>; > + bus-width = <8>; > + }; > + }; > + }; > + };
Hi, Laurent On 12/9/2014 2:59 AM, Laurent Pinchart wrote: > Hi Josh, > > Thank you for the patch. > > On Monday 08 December 2014 19:29:07 Josh Wu wrote: >> Add the document for ov2640 dt. >> >> Cc: devicetree@vger.kernel.org >> Signed-off-by: Josh Wu <josh.wu@atmel.com> >> --- >> v1 -> v2: >> 1. change the compatible string to be consistent with verdor file. > That's nice, but you still need to send a patch to add the ovti vendor prefix > to Documentation/devicetree/bindings/vendor-prefixes.txt. It's not there yet. As Fabio already send a patch to fix the vendor file. See URL: http://patchwork.ozlabs.org/patch/416685/ I think it will go to mainline soon. > >> 2. change the clock and pins' name. >> 3. add missed pinctrl in example. >> >> .../devicetree/bindings/media/i2c/ov2640.txt | 44 +++++++++++++++++++ >> 1 file changed, 44 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt >> b/Documentation/devicetree/bindings/media/i2c/ov2640.txt new file mode >> 100644 >> index 0000000..15be3cb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt >> @@ -0,0 +1,44 @@ >> +* Omnivision ov2640 CMOS sensor >> + >> +The Omnivision OV2640 sensor support multiple resolutions output, such as >> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB >> +output format. >> + >> +Required Properties : >> +- compatible: Must be "ovti,ov2640" >> +- clocks: reference master clock, if using external fixed clock, you >> + no need to have such property. > That's not true anymore, the clocks property is mandatory in all cases. Just > describe it as > > - clocks: reference to the xvclk input clock. > >> +- clock-names: Must be "xvclk", it means the master clock for ov2640. > I would drop "it means the master clock for ov2640". > >> +Optional Properties: >> +- resetb-gpios: reset pin > - resetb-gpios: reference to the GPIO connected to the resetb pin, if any. > >> +- pwdn-gpios: power down pin > - pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any. I'll fix all above that you mentioned in next version. Thank a lot for the review. Best Regards, Josh Wu > >> + >> +The device node must contain one 'port' child node for its digital output >> +video port, in accordance with the video interface bindings defined in >> +Documentation/devicetree/bindings/media/video-interfaces.txt. >> + >> +Example: >> + >> + i2c1: i2c@f0018000 { >> + ov2640: camera@0x30 { >> + compatible = "ovti,ov2640"; >> + reg = <0x30>; >> + >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn > &pinctrl_ov2640_reset>; >> + >> + resetb-gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; >> + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; >> + >> + clocks = <&pck1>; >> + clock-names = "xvclk"; >> + >> + port { >> + ov2640_0: endpoint { >> + remote-endpoint = <&isi_0>; >> + bus-width = <8>; >> + }; >> + }; >> + }; >> + }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt new file mode 100644 index 0000000..15be3cb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt @@ -0,0 +1,44 @@ +* Omnivision ov2640 CMOS sensor + +The Omnivision OV2640 sensor support multiple resolutions output, such as +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB +output format. + +Required Properties : +- compatible: Must be "ovti,ov2640" +- clocks: reference master clock, if using external fixed clock, you + no need to have such property. +- clock-names: Must be "xvclk", it means the master clock for ov2640. + +Optional Properties: +- resetb-gpios: reset pin +- pwdn-gpios: power down pin + +The device node must contain one 'port' child node for its digital output +video port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_reset>; + + resetb-gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + + clocks = <&pck1>; + clock-names = "xvclk"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + };
Add the document for ov2640 dt. Cc: devicetree@vger.kernel.org Signed-off-by: Josh Wu <josh.wu@atmel.com> --- v1 -> v2: 1. change the compatible string to be consistent with verdor file. 2. change the clock and pins' name. 3. add missed pinctrl in example. .../devicetree/bindings/media/i2c/ov2640.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt