@@ -3446,23 +3446,34 @@ static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
* @buffer: contains the command to write and where the return status will
* be placed
* @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
*
* Communicates with the manageability block. On success return 0
* else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
**/
static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
- u32 length)
+ u32 length, u32 timeout,
+ bool return_data)
{
- u32 hicr, i, bi;
+ u32 hicr, i, bi, fwsts;
u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
- u8 buf_len, dword_len;
+ u16 buf_len, dword_len;
- if (length == 0 || length & 0x3 ||
- length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
- hw_dbg(hw, "Buffer length failure.\n");
+ if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ hw_dbg(hw, "Buffer length failure buffersize-%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ /* Set bit 9 of FWSTS clearing FW reset indication */
+ fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
+ IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
+
/* Check that the host interface is enabled. */
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
if ((hicr & IXGBE_HICR_EN) == 0) {
@@ -3470,7 +3481,12 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
- /* Calculate length in DWORDs */
+ /* Calculate length in DWORDs. We must be DWORD aligned */
+ if ((length % (sizeof(u32))) != 0) {
+ hw_dbg(hw, "Buffer length failure, not aligned to dword");
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
dword_len = length >> 2;
/*
@@ -3484,7 +3500,7 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
/* Setting this bit tells the ARC that a new command is pending. */
IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
- for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) {
+ for (i = 0; i < timeout; i++) {
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
if (!(hicr & IXGBE_HICR_C))
break;
@@ -3492,12 +3508,15 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
}
/* Check command successful completion. */
- if (i == IXGBE_HI_COMMAND_TIMEOUT ||
+ if ((timeout != 0 && i == timeout) ||
(!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) {
hw_dbg(hw, "Command has failed with no status valid.\n");
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ if (!return_data)
+ return 0;
+
/* Calculate length in DWORDs */
dword_len = hdr_size >> 2;
@@ -3568,7 +3587,9 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
- sizeof(fw_cmd));
+ sizeof(fw_cmd),
+ IXGBE_HI_COMMAND_TIMEOUT,
+ true);
if (ret_val != 0)
continue;
@@ -2314,9 +2314,12 @@ enum ixgbe_fdir_pballoc_type {
#define IXGBE_FDIR_DROP_QUEUE 127
/* Manageablility Host Interface defines */
-#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */
-#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */
-#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */
+#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */
+#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */
+#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */
+#define IXGBE_HI_FLASH_ERASE_TIMEOUT 1000 /* Process Erase command limit */
+#define IXGBE_HI_FLASH_UPDATE_TIMEOUT 5000 /* Process Update command limit */
+#define IXGBE_HI_FLASH_APPLY_TIMEOUT 0 /* Process Apply command limit */
/* CEM Support */
#define FW_CEM_HDR_LEN 0x4