@@ -2,7 +2,11 @@ Broadcom GISB bus Arbiter controller
Required properties:
-- compatible: should be "brcm,gisb-arb"
+- compatible:
+ "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips
+ "brcm,bcm7435-gisb-arb" for newer 40nm chips
+ "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
+ "brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
- interrupt-parent: specifies the phandle to the parent interrupt controller
this arbiter gets interrupt line from
@@ -47,6 +47,36 @@ enum {
ARB_ERR_CAP_MASTER,
};
+static const int gisb_offsets_bcm7038[] = {
+ [ARB_TIMER] = 0x00c,
+ [ARB_ERR_CAP_CLR] = 0x0c4,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x0c8,
+ [ARB_ERR_CAP_DATA] = 0x0cc,
+ [ARB_ERR_CAP_STATUS] = 0x0d0,
+ [ARB_ERR_CAP_MASTER] = -1,
+};
+
+static const int gisb_offsets_bcm7400[] = {
+ [ARB_TIMER] = 0x00c,
+ [ARB_ERR_CAP_CLR] = 0x0c8,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x0cc,
+ [ARB_ERR_CAP_DATA] = 0x0d0,
+ [ARB_ERR_CAP_STATUS] = 0x0d4,
+ [ARB_ERR_CAP_MASTER] = 0x0d8,
+};
+
+static const int gisb_offsets_bcm7435[] = {
+ [ARB_TIMER] = 0x00c,
+ [ARB_ERR_CAP_CLR] = 0x168,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x16c,
+ [ARB_ERR_CAP_DATA] = 0x170,
+ [ARB_ERR_CAP_STATUS] = 0x174,
+ [ARB_ERR_CAP_MASTER] = 0x178,
+};
+
static const int gisb_offsets_bcm7445[] = {
[ARB_TIMER] = 0x008,
[ARB_ERR_CAP_CLR] = 0x7e4,
@@ -230,10 +260,20 @@ static struct attribute_group gisb_arb_sysfs_attr_group = {
.attrs = gisb_arb_sysfs_attrs,
};
+static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
+ { .compatible = "brcm,gisb-arb", .data = gisb_offsets_bcm7445 },
+ { .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
+ { .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
+ { .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
+ { .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
+ { },
+};
+
static int brcmstb_gisb_arb_probe(struct platform_device *pdev)
{
struct device_node *dn = pdev->dev.of_node;
struct brcmstb_gisb_arb_device *gdev;
+ const struct of_device_id *of_id;
struct resource *r;
int err, timeout_irq, tea_irq;
unsigned int num_masters, j = 0;
@@ -254,7 +294,12 @@ static int brcmstb_gisb_arb_probe(struct platform_device *pdev)
if (IS_ERR(gdev->base))
return PTR_ERR(gdev->base);
- gdev->gisb_offsets = gisb_offsets_bcm7445;
+ of_id = of_match_node(brcmstb_gisb_arb_of_match, dn);
+ if (!of_id) {
+ pr_err("failed to look up compatible string\n");
+ return -EINVAL;
+ }
+ gdev->gisb_offsets = of_id->data;
err = devm_request_irq(&pdev->dev, timeout_irq,
brcmstb_gisb_timeout_handler, 0, pdev->name,
@@ -307,11 +352,6 @@ static int brcmstb_gisb_arb_probe(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
- { .compatible = "brcm,gisb-arb" },
- { },
-};
-
static struct platform_driver brcmstb_gisb_arb_driver = {
.probe = brcmstb_gisb_arb_probe,
.driver = {
This will select the appropriate register layout based on the DT "compatible" string. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> --- .../devicetree/bindings/bus/brcm,gisb-arb.txt | 6 ++- drivers/bus/brcmstb_gisb.c | 52 +++++++++++++++++++--- 2 files changed, 51 insertions(+), 7 deletions(-)