@@ -24,6 +24,7 @@
#include <net/ip6_checksum.h>
#include <uapi/linux/mdio.h>
#include <linux/mdio.h>
+#include <linux/usb/cdc.h>
/* Version Information */
#define DRIVER_VERSION "v1.07.0 (2014/10/09)"
@@ -466,9 +467,6 @@ enum rtl8152_flags {
#define MCU_TYPE_PLA 0x0100
#define MCU_TYPE_USB 0x0000
-#define REALTEK_USB_DEVICE(vend, prod) \
- USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC)
-
struct tally_counter {
__le64 tx_packets;
__le64 rx_packets;
@@ -3915,11 +3913,27 @@ static void rtl8152_disconnect(struct usb_interface *intf)
}
}
+#define REALTEK_USB_DEVICE(vend, prod) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC \
+}, \
+{ \
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \
+ USB_DEVICE_ID_MATCH_DEVICE, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
/* table of devices that work with this driver */
static struct usb_device_id rtl8152_table[] = {
- {USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
- {USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
- {USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
{}
};
Redefine REALTEK_USB_DEVICE for the desired USB interface for probe(). There are three USB interfaces for the device. USB_CLASS_COMM and USB_CLASS_CDC_DATA are for ECM mode (config #2). USB_CLASS_VENDOR_SPEC is for the vendor mode (config #1). However, we are not interesting in USB_CLASS_CDC_DATA for probe(), so redefine REALTEK_USB_DEVICE to ignore the USB interface class of USB_CLASS_CDC_DATA. Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- drivers/net/usb/r8152.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)