Message ID | 1416750195-25318-6-git-send-email-hdegoede@redhat.com |
---|---|
State | Accepted |
Delegated to: | Ian Campbell |
Headers | show |
On Sun, 2014-11-23 at 14:43 +0100, Hans de Goede wrote: > The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, > rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG > controller), ethernet, 3.5 mm jack with a/v out and hdmi out: > > http://www.geekbuying.com/item/CS908-Allwinner-A31S-Quad-Core-1-2GHz-Android-4-4-Mini-TV-Box-HDMI-HDD-Player-1G-8G-WIFI-Miracast---Black-333395.html > > Note it has no sdcard slot and therefore can only be fel booted. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > Acked-by: Ian Campbell <ijc@hellion.org.uk> > --- > configs/CSQ_CS908_defconfig | 19 +++++++++++++++++++ Apparently I'm terrible at remembering this during review: this is missing a MAINTAINERS entry. (MAKEALL warns about this when regenerating boards.cfg). Since this patch is only in u-boot-sunxi#next so far do you just want to fold in an update to add it to your stanza (or add a new appropriate stanza) and force push? Ack to that plan if you do. FYI I've just force pushed a similar change adding Chen-Yu's entry to the Hummingbird A31. Ian.
Hi, On 14-12-14 15:57, Ian Campbell wrote: > On Sun, 2014-11-23 at 14:43 +0100, Hans de Goede wrote: >> The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, >> rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG >> controller), ethernet, 3.5 mm jack with a/v out and hdmi out: >> >> http://www.geekbuying.com/item/CS908-Allwinner-A31S-Quad-Core-1-2GHz-Android-4-4-Mini-TV-Box-HDMI-HDD-Player-1G-8G-WIFI-Miracast---Black-333395.html >> >> Note it has no sdcard slot and therefore can only be fel booted. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> Acked-by: Ian Campbell <ijc@hellion.org.uk> >> --- >> configs/CSQ_CS908_defconfig | 19 +++++++++++++++++++ > > Apparently I'm terrible at remembering this during review: this is > missing a MAINTAINERS entry. (MAKEALL warns about this when regenerating > boards.cfg). Yeah, I'm bad at remembering to update MAINTAINERS too... > Since this patch is only in u-boot-sunxi#next so far do you just want to > fold in an update to add it to your stanza (or add a new appropriate > stanza) and force push? Ack to that plan if you do. Done (fixed, forced-push). I've also fixed the same problem for the new Ippo_q8h_v1.2_defconfig in my sun8i spl / draminit set in my personal tree. Regards, Hans
On Thu, 2014-12-18 at 11:39 +0100, Hans de Goede wrote: > Hi, > > On 14-12-14 15:57, Ian Campbell wrote: > > On Sun, 2014-11-23 at 14:43 +0100, Hans de Goede wrote: > >> The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, > >> rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG > >> controller), ethernet, 3.5 mm jack with a/v out and hdmi out: > >> > >> http://www.geekbuying.com/item/CS908-Allwinner-A31S-Quad-Core-1-2GHz-Android-4-4-Mini-TV-Box-HDMI-HDD-Player-1G-8G-WIFI-Miracast---Black-333395.html > >> > >> Note it has no sdcard slot and therefore can only be fel booted. > >> > >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >> Acked-by: Ian Campbell <ijc@hellion.org.uk> > >> --- > >> configs/CSQ_CS908_defconfig | 19 +++++++++++++++++++ > > > > Apparently I'm terrible at remembering this during review: this is > > missing a MAINTAINERS entry. (MAKEALL warns about this when regenerating > > boards.cfg). > > Yeah, I'm bad at remembering to update MAINTAINERS too... > > > Since this patch is only in u-boot-sunxi#next so far do you just want to > > fold in an update to add it to your stanza (or add a new appropriate > > stanza) and force push? Ack to that plan if you do. > > Done (fixed, forced-push). Thanks. > I've also fixed the same problem for the new Ippo_q8h_v1.2_defconfig in > my sun8i spl / draminit set in my personal tree. Great, that's one less to forget then! Ian.
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig new file mode 100644 index 0000000..18fe1f3 --- /dev/null +++ b/configs/CSQ_CS908_defconfig @@ -0,0 +1,19 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" +CONFIG_FDTFILE="sun6i-a31s-cs908.dtb" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_TARGET_CSQ_CS908=y ++S:CONFIG_DRAM_CLK=432 ++S:CONFIG_DRAM_ZQ=123 +# Ethernet phy power ++S:CONFIG_AXP221_DLDO1_VOLT=3300 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# HDMI power ? ++S:CONFIG_AXP221_ALDO2_VOLT=1800 ++S:CONFIG_AXP221_ALDO3_VOLT=3000 +# No Vbus gpio for either usb ++S:CONFIG_USB1_VBUS_PIN="" ++S:CONFIG_USB2_VBUS_PIN=""