@@ -39,6 +39,7 @@ struct device_node;
#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */
#define EEH_ENABLE_IO_FOR_LOG 0x10 /* Enable IO for log */
+#define EEH_EARLY_DUMP_LOG 0x20 /* Dump log immediately */
/*
* Delay for PE reset, all in ms
@@ -143,6 +143,8 @@ static int __init eeh_setup(char *str)
{
if (!strcmp(str, "off"))
eeh_add_flag(EEH_FORCE_DISABLED);
+ else if (!strcmp(str, "early_log"))
+ eeh_add_flag(EEH_EARLY_DUMP_LOG);
return 1;
}
@@ -354,6 +354,9 @@ static int ioda_eeh_get_phb_state(struct eeh_pe *pe)
} else if (!(pe->state & EEH_PE_ISOLATED)) {
eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(pe);
+
+ if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
}
return result;
@@ -452,6 +455,9 @@ static int ioda_eeh_get_pe_state(struct eeh_pe *pe)
eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(pe);
+
+ if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
}
return result;
@@ -731,7 +737,8 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
char *drv_log, unsigned long len)
{
- pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+ if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
return 0;
}
@@ -1087,6 +1094,10 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
!((*pe)->state & EEH_PE_ISOLATED)) {
eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
ioda_eeh_phb_diag(*pe);
+
+ if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+ pnv_pci_dump_phb_diag_data((*pe)->phb,
+ (*pe)->data);
}
/*
On PowerNV platform, PHB diag-data is dumped after stopping device drivers. In case of recursive EEH errors, the kernel is usually crashed before dumping PHB diag-data for the second EEH error. It's hard to locate the root cause of the second EEH error without PHB diag-data. The patch adds one more EEH option "eeh=early_log", which helps dumping PHB diag-data immediately once frozen PE is detected, in order to get the PHB diag-data for the second EEH error. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> --- arch/powerpc/include/asm/eeh.h | 1 + arch/powerpc/kernel/eeh.c | 2 ++ arch/powerpc/platforms/powernv/eeh-ioda.c | 13 ++++++++++++- 3 files changed, 15 insertions(+), 1 deletion(-)