@@ -46,3 +46,53 @@ void pci_init_board(void)
hose->last_busno = pci_hose_scan(hose);
}
+
+static struct pci_controller *get_hose(void)
+{
+ if (gd->arch.hose)
+ return gd->arch.hose;
+
+ return pci_bus_to_hose(0);
+}
+
+unsigned int pci_read_config8(pci_dev_t dev, unsigned where)
+{
+ uint8_t value;
+
+ pci_hose_read_config_byte(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+unsigned int pci_read_config16(pci_dev_t dev, unsigned where)
+{
+ uint16_t value;
+
+ pci_hose_read_config_word(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+unsigned int pci_read_config32(pci_dev_t dev, unsigned where)
+{
+ uint32_t value;
+
+ pci_hose_read_config_dword(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_byte(get_hose(), dev, where, value);
+}
+
+void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_word(get_hose(), dev, where, value);
+}
+
+void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_dword(get_hose(), dev, where, value);
+}
@@ -33,4 +33,17 @@ void board_pci_setup_hose(struct pci_controller *hose);
* later use, but will become invalid one DRAM is available.
*/
int pci_early_init_hose(struct pci_controller **hosep);
+
+/*
+ * Simple PCI access routines - these work from either the early PCI hose
+ * or the 'real' one, created after U-Boot has memory available
+ */
+unsigned int pci_read_config8(pci_dev_t dev, unsigned where);
+unsigned int pci_read_config16(pci_dev_t dev, unsigned where);
+unsigned int pci_read_config32(pci_dev_t dev, unsigned where);
+
+void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
+void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
+void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);
+
#endif
Add simple PCI access routines for x86 which permit use before relocation. The normal PCI stack is still used, but for pre-relocation use there can only ever be a single hose. After relocation, fall back to the normal access, although even then on x86 machines there is normally only a single PCI bus. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v3: None Changes in v2: None arch/x86/cpu/pci.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/include/asm/pci.h | 13 ++++++++++++ 2 files changed, 63 insertions(+)