Message ID | 54610F8B.2000600@houston-radar.com |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
Hi Brian, 2014-11-10 11:18 GMT-08:00 Brian Hill <brian@houston-radar.com>: > > When advertised capabilities are changed with mii-tool, > such as: > mii-tool -A 10baseT > the existing handler has two errors. > > - An actual PHY register value is provided by mii-tool, and this > must be mapped to internal state with mii_adv_to_ethtool_adv_t(). > - The PHY state machine needs to be told that autonegotiation has > again been performed. If not, the MAC will not be notified of > the new link speed and duplex, resulting in a possible config > mismatch. Looks very good to me, just one minor thing I did not notice initially. Once you fix that, feel free to resubmit with: Acked-by: Florian Fainelli <f.fainelli@gmail.com> > > Signed-off-by: Brian Hill <Brian@houston-radar.com> > --- > drivers/net/phy/phy.c | 36 ++++++++++++++++++++++++------------ > 1 file changed, 24 insertions(+), 12 deletions(-) > > diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c > index c94e2a2..ee9f0c9 100644 > --- a/drivers/net/phy/phy.c > +++ b/drivers/net/phy/phy.c > @@ -352,6 +352,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct > ifreq *ifr, int cmd) > { > struct mii_ioctl_data *mii_data = if_mii(ifr); > u16 val = mii_data->val_in; > + int change_autoneg = 0; This should be a "bool autoneg = false;" here > > switch (cmd) { > case SIOCGMIIPHY: > @@ -367,22 +368,29 @@ int phy_mii_ioctl(struct phy_device *phydev, struct > ifreq *ifr, int cmd) > if (mii_data->phy_id == phydev->addr) { > switch (mii_data->reg_num) { > case MII_BMCR: > - if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) > + if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) { > + if (phydev->autoneg == AUTONEG_ENABLE) > + change_autoneg = 1; > phydev->autoneg = AUTONEG_DISABLE; > - else > + if (val & BMCR_FULLDPLX) > + phydev->duplex = DUPLEX_FULL; > + else > + phydev->duplex = DUPLEX_HALF; > + if (val & BMCR_SPEED1000) > + phydev->speed = SPEED_1000; > + else if (val & BMCR_SPEED100) > + phydev->speed = SPEED_100; > + else phydev->speed = SPEED_10; > + } > + else { > + if (phydev->autoneg == AUTONEG_DISABLE) > + change_autoneg = 1; > phydev->autoneg = AUTONEG_ENABLE; > - if (!phydev->autoneg && (val & BMCR_FULLDPLX)) > - phydev->duplex = DUPLEX_FULL; > - else > - phydev->duplex = DUPLEX_HALF; > - if (!phydev->autoneg && (val & BMCR_SPEED1000)) > - phydev->speed = SPEED_1000; > - else if (!phydev->autoneg && > - (val & BMCR_SPEED100)) > - phydev->speed = SPEED_100; > + } > break; > case MII_ADVERTISE: > - phydev->advertising = val; > + phydev->advertising = mii_adv_to_ethtool_adv_t(val); > + change_autoneg = 1; > break; > default: > /* do nothing */ > @@ -396,6 +404,10 @@ int phy_mii_ioctl(struct phy_device *phydev, struct > ifreq *ifr, int cmd) > if (mii_data->reg_num == MII_BMCR && > val & BMCR_RESET) > return phy_init_hw(phydev); > + > + if (change_autoneg) > + return phy_start_aneg(phydev); > + > return 0; > > case SIOCSHWTSTAMP: > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c94e2a2..ee9f0c9 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -352,6 +352,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *mii_data = if_mii(ifr); u16 val = mii_data->val_in; + int change_autoneg = 0; switch (cmd) {
When advertised capabilities are changed with mii-tool, such as: mii-tool -A 10baseT the existing handler has two errors. - An actual PHY register value is provided by mii-tool, and this must be mapped to internal state with mii_adv_to_ethtool_adv_t(). - The PHY state machine needs to be told that autonegotiation has again been performed. If not, the MAC will not be notified of the new link speed and duplex, resulting in a possible config mismatch. Signed-off-by: Brian Hill <Brian@houston-radar.com> --- drivers/net/phy/phy.c | 36 ++++++++++++++++++++++++------------ 1 file changed, 24 insertions(+), 12 deletions(-) case SIOCGMIIPHY: @@ -367,22 +368,29 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) if (mii_data->phy_id == phydev->addr) { switch (mii_data->reg_num) { case MII_BMCR: - if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) + if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) { + if (phydev->autoneg == AUTONEG_ENABLE) + change_autoneg = 1; phydev->autoneg = AUTONEG_DISABLE; - else + if (val & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + if (val & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (val & BMCR_SPEED100) + phydev->speed = SPEED_100; + else phydev->speed = SPEED_10; + } + else { + if (phydev->autoneg == AUTONEG_DISABLE) + change_autoneg = 1; phydev->autoneg = AUTONEG_ENABLE; - if (!phydev->autoneg && (val & BMCR_FULLDPLX)) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - if (!phydev->autoneg && (val & BMCR_SPEED1000)) - phydev->speed = SPEED_1000; - else if (!phydev->autoneg && - (val & BMCR_SPEED100)) - phydev->speed = SPEED_100; + } break; case MII_ADVERTISE: - phydev->advertising = val; + phydev->advertising = mii_adv_to_ethtool_adv_t(val); + change_autoneg = 1; break; default: /* do nothing */ @@ -396,6 +404,10 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) if (mii_data->reg_num == MII_BMCR && val & BMCR_RESET) return phy_init_hw(phydev); + + if (change_autoneg) + return phy_start_aneg(phydev); + return 0; case SIOCSHWTSTAMP: