diff mbox

[U-Boot,v2,11/11] beagle_x15: add board support for Beagle x15

Message ID 1415285067-7310-1-git-send-email-balbi@ti.com
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Felipe Balbi Nov. 6, 2014, 2:44 p.m. UTC 
BeagleBoard-X15 is the next generation Open Source
Hardware BeagleBoard based on TI's AM5728 SoC
featuring dual core 1.5GHZ A15 processor. The
platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60),
separate LCD port, video In port, 4GB eMMC, uSD,
Analog audio in/out, dual 1G Ethernet.

For more information, refer to:
http://www.elinux.org/Beagleboard:BeagleBoard-X15

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---

changes since v1:
	new commit log

 arch/arm/cpu/armv7/omap5/Kconfig  |   4 +
 board/ti/beagle_x15/Kconfig       |  12 ++
 board/ti/beagle_x15/Makefile      |   8 +
 board/ti/beagle_x15/board.c       | 328 ++++++++++++++++++++++++++++++++++++++
 board/ti/beagle_x15/mux_data.h    |  55 +++++++
 configs/beagle_x15_defconfig      |   5 +
 include/configs/beagle_x15.h      |  89 +++++++++++
 include/configs/ti_omap5_common.h |   2 +
 8 files changed, 503 insertions(+)
 create mode 100644 board/ti/beagle_x15/Kconfig
 create mode 100644 board/ti/beagle_x15/Makefile
 create mode 100644 board/ti/beagle_x15/board.c
 create mode 100644 board/ti/beagle_x15/mux_data.h
 create mode 100644 configs/beagle_x15_defconfig
 create mode 100644 include/configs/beagle_x15.h

Comments

Nishanth Menon Nov. 6, 2014, 2:46 p.m. UTC | #1 
On Thu, Nov 6, 2014 at 8:44 AM, Felipe Balbi <balbi@ti.com> wrote:
> BeagleBoard-X15 is the next generation Open Source
> Hardware BeagleBoard based on TI's AM5728 SoC
> featuring dual core 1.5GHZ A15 processor. The
> platform features 2GB DDR3L (w/dual 32bit busses),
> eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60),
> separate LCD port, video In port, 4GB eMMC, uSD,
> Analog audio in/out, dual 1G Ethernet.
>
> For more information, refer to:
> http://www.elinux.org/Beagleboard:BeagleBoard-X15
>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
>

awesome - looks good to me. Thanks for doing this.

> changes since v1:
>         new commit log
>
>  arch/arm/cpu/armv7/omap5/Kconfig  |   4 +
>  board/ti/beagle_x15/Kconfig       |  12 ++
>  board/ti/beagle_x15/Makefile      |   8 +
>  board/ti/beagle_x15/board.c       | 328 ++++++++++++++++++++++++++++++++++++++
>  board/ti/beagle_x15/mux_data.h    |  55 +++++++
>  configs/beagle_x15_defconfig      |   5 +
>  include/configs/beagle_x15.h      |  89 +++++++++++
>  include/configs/ti_omap5_common.h |   2 +
>  8 files changed, 503 insertions(+)
>  create mode 100644 board/ti/beagle_x15/Kconfig
>  create mode 100644 board/ti/beagle_x15/Makefile
>  create mode 100644 board/ti/beagle_x15/board.c
>  create mode 100644 board/ti/beagle_x15/mux_data.h
>  create mode 100644 configs/beagle_x15_defconfig
>  create mode 100644 include/configs/beagle_x15.h
>
> diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
> index 129982c..aca862d 100644
> --- a/arch/arm/cpu/armv7/omap5/Kconfig
> +++ b/arch/arm/cpu/armv7/omap5/Kconfig
> @@ -12,6 +12,9 @@ config TARGET_OMAP5_UEVM
>  config TARGET_DRA7XX_EVM
>         bool "TI DRA7XX"
>
> +config TARGET_BEAGLE_X15
> +       bool "BeagleBoard X15"
> +
>  endchoice
>
>  config SYS_SOC
> @@ -20,5 +23,6 @@ config SYS_SOC
>  source "board/compulab/cm_t54/Kconfig"
>  source "board/ti/omap5_uevm/Kconfig"
>  source "board/ti/dra7xx/Kconfig"
> +source "board/ti/beagle_x15/Kconfig"
>
>  endif
> diff --git a/board/ti/beagle_x15/Kconfig b/board/ti/beagle_x15/Kconfig
> new file mode 100644
> index 0000000..a305ff1
> --- /dev/null
> +++ b/board/ti/beagle_x15/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_BEAGLE_X15
> +
> +config SYS_BOARD
> +       default "beagle_x15"
> +
> +config SYS_VENDOR
> +       default "ti"
> +
> +config SYS_CONFIG_NAME
> +       default "beagle_x15"
> +
> +endif
> diff --git a/board/ti/beagle_x15/Makefile b/board/ti/beagle_x15/Makefile
> new file mode 100644
> index 0000000..5cd6873
> --- /dev/null
> +++ b/board/ti/beagle_x15/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# (C) Copyright 2014
> +# Texas Instruments, <www.ti.com>
> +#
> +# SPDX-License-Identifier:     GPL-2.0+
> +#
> +
> +obj-y  := board.o
> diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
> new file mode 100644
> index 0000000..5cafc87
> --- /dev/null
> +++ b/board/ti/beagle_x15/board.c
> @@ -0,0 +1,328 @@
> +/*
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
> + *
> + * Author: Felipe Balbi <balbi@ti.com>
> + *
> + * Based on board/ti/dra7xx/evm.c
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <palmas.h>
> +#include <sata.h>
> +#include <usb.h>
> +#include <asm/omap_common.h>
> +#include <asm/emif.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch/mmc_host_def.h>
> +#include <asm/arch/sata.h>
> +#include <asm/arch/gpio.h>
> +#include <environment.h>
> +
> +#include "mux_data.h"
> +
> +#ifdef CONFIG_DRIVER_TI_CPSW
> +#include <cpsw.h>
> +#endif
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +const struct omap_sysinfo sysinfo = {
> +       "Board: BeagleBoard x15\n"
> +};
> +
> +static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
> +       .dmm_lisa_map_3 = 0x80740300,
> +       .is_ma_present  = 0x1
> +};
> +
> +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
> +{
> +       *dmm_lisa_regs = &beagle_x15_lisa_regs;
> +}
> +
> +static const struct emif_regs beagle_x15_ddr3_532mhz_emif_regs = {
> +       .sdram_config_init      = 0x61851B32, /* dont know what to do about this */
> +       .sdram_config           = 0x61851B32,
> +       .sdram_config2          = 0x00000000,
> +       .ref_ctrl               = 0x00001035,
> +       .sdram_tim1             = 0xCEEF266B,
> +       .sdram_tim2             = 0x328F7FDA,
> +       .sdram_tim3             = 0x027F88A8,
> +       .read_idle_ctrl         = 0x00050001, /* not sure where in gel file */
> +       .zq_config              = 0x0007190B,
> +       .temp_alert_config      = 0x00000000,
> +       .emif_ddr_phy_ctlr_1_init = 0x0E24400A, /* not sure what to do about this */
> +       .emif_ddr_phy_ctlr_1    = 0x0E24400A, /* based on non hw level enabled */
> +       .emif_ddr_ext_phy_ctrl_1 = 0x10040100, /* not sure wherein gel file */
> +       .emif_ddr_ext_phy_ctrl_2 = 0x00740074,
> +       .emif_ddr_ext_phy_ctrl_3 = 0x00780078,
> +       .emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
> +       .emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
> +       .emif_rd_wr_lvl_rmp_win = 0x00000000,
> +       .emif_rd_wr_lvl_rmp_ctl = 0x00000000, /* based on non hw level enabled */
> +       .emif_rd_wr_lvl_ctl     = 0x00000000, /* not sure where based in gel file */
> +       .emif_rd_wr_exec_thresh = 0x00000305
> +};
> +
> +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
> +{
> +       *regs = &beagle_x15_ddr3_532mhz_emif_regs;
> +}
> +
> +static const u32 beagle_x15_ddr3_ext_phy_ctrl_const_regs[] = {
> +       0x00800080, // 6
> +
> +
> +       0x00360036, // 7
> +       0x00340034, // 8
> +       0x00360036, // 9
> +       0x00350035, // 10
> +       0x00350035, // 11
> +
> +       0x01ff01ff, // 12
> +       0x01ff01ff,
> +       0x01ff01ff,
> +       0x01ff01ff,
> +       0x01ff01ff,
> +
> +       0x00430043,
> +       0x003e003e,
> +       0x004a004a,
> +       0x00470047,
> +       0x00400040,
> +
> +       0x00000000,
> +       0x00600020,
> +       0x40010080,
> +       0x08102040,
> +
> +       0x00400040,
> +       0x00400040,
> +       0x00400040,
> +       0x00400040,
> +       0x00400040
> +};
> +
> +void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
> +{
> +       *regs = beagle_x15_ddr3_ext_phy_ctrl_const_regs;
> +       *size = ARRAY_SIZE(beagle_x15_ddr3_ext_phy_ctrl_const_regs);
> +}
> +
> +struct vcores_data beagle_x15_volts = {
> +       .mpu.value              = VDD_MPU_DRA752,
> +       .mpu.efuse.reg          = STD_FUSE_OPP_VMIN_MPU_NOM,
> +       .mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
> +       .mpu.addr               = TPS659038_REG_ADDR_SMPS12,
> +       .mpu.pmic               = &tps659038,
> +
> +       .eve.value              = VDD_EVE_DRA752,
> +       .eve.efuse.reg          = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
> +       .eve.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
> +       .eve.addr               = TPS659038_REG_ADDR_SMPS45,
> +       .eve.pmic               = &tps659038,
> +
> +       .gpu.value              = VDD_GPU_DRA752,
> +       .gpu.efuse.reg          = STD_FUSE_OPP_VMIN_GPU_NOM,
> +       .gpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
> +       .gpu.addr               = TPS659038_REG_ADDR_SMPS45,
> +       .gpu.pmic               = &tps659038,
> +
> +       .core.value             = VDD_CORE_DRA752,
> +       .core.efuse.reg         = STD_FUSE_OPP_VMIN_CORE_NOM,
> +       .core.efuse.reg_bits    = DRA752_EFUSE_REGBITS,
> +       .core.addr              = TPS659038_REG_ADDR_SMPS6,
> +       .core.pmic              = &tps659038,
> +
> +       .iva.value              = VDD_IVA_DRA752,
> +       .iva.efuse.reg          = STD_FUSE_OPP_VMIN_IVA_NOM,
> +       .iva.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
> +       .iva.addr               = TPS659038_REG_ADDR_SMPS45,
> +       .iva.pmic               = &tps659038,
> +};
> +
> +void hw_data_init(void)
> +{
> +       *prcm = &dra7xx_prcm;
> +       *dplls_data = &dra7xx_dplls;
> +       *omap_vcores = &beagle_x15_volts;
> +       *ctrl = &dra7xx_ctrl;
> +}
> +
> +int board_init(void)
> +{
> +       gpmc_init();
> +       gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
> +
> +       return 0;
> +}
> +
> +int board_late_init(void)
> +{
> +       init_sata(0);
> +       /*
> +        * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
> +        * This is the POWERHOLD-in-Low behavior.
> +        */
> +       palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
> +       return 0;
> +}
> +
> +static void do_set_mux32(u32 base,
> +                        struct pad_conf_entry const *array, int size)
> +{
> +       int i;
> +       struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
> +
> +       for (i = 0; i < size; i++, pad++)
> +               writel(pad->val, base + pad->offset);
> +}
> +
> +void set_muxconf_regs_essential(void)
> +{
> +       do_set_mux32((*ctrl)->control_padconf_core_base,
> +                    core_padconf_array_essential,
> +                    sizeof(core_padconf_array_essential) /
> +                    sizeof(struct pad_conf_entry));
> +}
> +
> +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
> +int board_mmc_init(bd_t *bis)
> +{
> +       omap_mmc_init(0, 0, 0, -1, -1);
> +       omap_mmc_init(1, 0, 0, -1, -1);
> +       return 0;
> +}
> +#endif
> +
> +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
> +int spl_start_uboot(void)
> +{
> +       /* break into full u-boot on 'c' */
> +       if (serial_tstc() && serial_getc() == 'c')
> +               return 1;
> +
> +#ifdef CONFIG_SPL_ENV_SUPPORT
> +       env_init();
> +       env_relocate_spec();
> +       if (getenv_yesno("boot_os") != 1)
> +               return 1;
> +#endif
> +
> +       return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_DRIVER_TI_CPSW
> +
> +/* Delay value to add to calibrated value */
> +#define RGMII0_TXCTL_DLY_VAL           ((0x3 << 5) + 0x8)
> +#define RGMII0_TXD0_DLY_VAL            ((0x3 << 5) + 0x8)
> +#define RGMII0_TXD1_DLY_VAL            ((0x3 << 5) + 0x2)
> +#define RGMII0_TXD2_DLY_VAL            ((0x4 << 5) + 0x0)
> +#define RGMII0_TXD3_DLY_VAL            ((0x4 << 5) + 0x0)
> +#define VIN2A_D13_DLY_VAL              ((0x3 << 5) + 0x8)
> +#define VIN2A_D17_DLY_VAL              ((0x3 << 5) + 0x8)
> +#define VIN2A_D16_DLY_VAL              ((0x3 << 5) + 0x2)
> +#define VIN2A_D15_DLY_VAL              ((0x4 << 5) + 0x0)
> +#define VIN2A_D14_DLY_VAL              ((0x4 << 5) + 0x0)
> +
> +static void cpsw_control(int enabled)
> +{
> +       /* VTP can be added here */
> +}
> +
> +static struct cpsw_slave_data cpsw_slaves[] = {
> +       {
> +               .slave_reg_ofs  = 0x208,
> +               .sliver_reg_ofs = 0xd80,
> +               .phy_addr       = 1,
> +       },
> +       {
> +               .slave_reg_ofs  = 0x308,
> +               .sliver_reg_ofs = 0xdc0,
> +               .phy_addr       = 2,
> +       },
> +};
> +
> +static struct cpsw_platform_data cpsw_data = {
> +       .mdio_base              = CPSW_MDIO_BASE,
> +       .cpsw_base              = CPSW_BASE,
> +       .mdio_div               = 0xff,
> +       .channels               = 8,
> +       .cpdma_reg_ofs          = 0x800,
> +       .slaves                 = 1,
> +       .slave_data             = cpsw_slaves,
> +       .ale_reg_ofs            = 0xd00,
> +       .ale_entries            = 1024,
> +       .host_port_reg_ofs      = 0x108,
> +       .hw_stats_reg_ofs       = 0x900,
> +       .bd_ram_ofs             = 0x2000,
> +       .mac_control            = (1 << 5),
> +       .control                = cpsw_control,
> +       .host_port_num          = 0,
> +       .version                = CPSW_CTRL_VERSION_2,
> +};
> +
> +int board_eth_init(bd_t *bis)
> +{
> +       int ret;
> +       uint8_t mac_addr[6];
> +       uint32_t mac_hi, mac_lo;
> +       uint32_t ctrl_val;
> +
> +       /* try reading mac address from efuse */
> +       mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
> +       mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
> +       mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
> +       mac_addr[1] = (mac_hi & 0xFF00) >> 8;
> +       mac_addr[2] = mac_hi & 0xFF;
> +       mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
> +       mac_addr[4] = (mac_lo & 0xFF00) >> 8;
> +       mac_addr[5] = mac_lo & 0xFF;
> +
> +       if (!getenv("ethaddr")) {
> +               printf("<ethaddr> not set. Validating first E-fuse MAC\n");
> +
> +               if (is_valid_ether_addr(mac_addr))
> +                       eth_setenv_enetaddr("ethaddr", mac_addr);
> +       }
> +
> +       mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
> +       mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
> +       mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
> +       mac_addr[1] = (mac_hi & 0xFF00) >> 8;
> +       mac_addr[2] = mac_hi & 0xFF;
> +       mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
> +       mac_addr[4] = (mac_lo & 0xFF00) >> 8;
> +       mac_addr[5] = mac_lo & 0xFF;
> +
> +       if (!getenv("eth1addr")) {
> +               if (is_valid_ether_addr(mac_addr))
> +                       eth_setenv_enetaddr("eth1addr", mac_addr);
> +       }
> +
> +       ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
> +       ctrl_val |= 0x22;
> +       writel(ctrl_val, (*ctrl)->control_core_control_io1);
> +
> +       ret = cpsw_register(&cpsw_data);
> +       if (ret < 0)
> +               printf("Error %d registering CPSW switch\n", ret);
> +
> +       return ret;
> +}
> +#endif
> +
> +#ifdef CONFIG_USB_XHCI_OMAP
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> +       setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
> +                       OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M);
> +
> +       return 0;
> +}
> +#endif
> diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h
> new file mode 100644
> index 0000000..2294abe
> --- /dev/null
> +++ b/board/ti/beagle_x15/mux_data.h
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
> + *
> + * Author: Felipe Balbi <balbi@ti.com>
> + *
> + * Based on board/ti/dra7xx/evm.c
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +#ifndef _MUX_DATA_BEAGLE_X15_H_
> +#define _MUX_DATA_BEAGLE_X15_H_
> +
> +#include <asm/arch/mux_dra7xx.h>
> +
> +const struct pad_conf_entry core_padconf_array_essential[] = {
> +       {MMC1_CLK, (IEN | PTU | PDIS | M0)},    /* MMC1_CLK */
> +       {MMC1_CMD, (IEN | PTU | PDIS | M0)},    /* MMC1_CMD */
> +       {MMC1_DAT0, (IEN | PTU | PDIS | M0)},   /* MMC1_DAT0 */
> +       {MMC1_DAT1, (IEN | PTU | PDIS | M0)},   /* MMC1_DAT1 */
> +       {MMC1_DAT2, (IEN | PTU | PDIS | M0)},   /* MMC1_DAT2 */
> +       {MMC1_DAT3, (IEN | PTU | PDIS | M0)},   /* MMC1_DAT3 */
> +       {MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
> +       {MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
> +       {GPMC_A19, (IEN | PTU | PDIS | M1)},    /* mmc2_dat4 */
> +       {GPMC_A20, (IEN | PTU | PDIS | M1)},    /* mmc2_dat5 */
> +       {GPMC_A21, (IEN | PTU | PDIS | M1)},    /* mmc2_dat6 */
> +       {GPMC_A22, (IEN | PTU | PDIS | M1)},    /* mmc2_dat7 */
> +       {GPMC_A23, (IEN | PTU | PDIS | M1)},    /* mmc2_clk */
> +       {GPMC_A24, (IEN | PTU | PDIS | M1)},    /* mmc2_dat0 */
> +       {GPMC_A25, (IEN | PTU | PDIS | M1)},    /* mmc2_dat1 */
> +       {GPMC_A26, (IEN | PTU | PDIS | M1)},    /* mmc2_dat2 */
> +       {GPMC_A27, (IEN | PTU | PDIS | M1)},    /* mmc2_dat3 */
> +       {GPMC_CS1, (IEN | PTU | PDIS | M1)},    /* mmm2_cmd */
> +       {UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
> +       {UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
> +       {I2C1_SDA, (IEN | PTU | PDIS | M0)},    /* I2C1_SDA */
> +       {I2C1_SCL, (IEN | PTU | PDIS | M0)},    /* I2C1_SCL */
> +       {MDIO_MCLK, (PTU | PEN | M0)},          /* MDIO_MCLK  */
> +       {MDIO_D, (IEN | PTU | PEN | M0)},       /* MDIO_D  */
> +       {RGMII0_TXC, (M0) },
> +       {RGMII0_TXCTL, (M0) },
> +       {RGMII0_TXD3, (M0) },
> +       {RGMII0_TXD2, (M0) },
> +       {RGMII0_TXD1, (M0) },
> +       {RGMII0_TXD0, (M0) },
> +       {RGMII0_RXC, (IEN | M0) },
> +       {RGMII0_RXCTL, (IEN | M0) },
> +       {RGMII0_RXD3, (IEN | M0) },
> +       {RGMII0_RXD2, (IEN | M0) },
> +       {RGMII0_RXD1, (IEN | M0) },
> +       {RGMII0_RXD0, (IEN | M0) },
> +       {USB1_DRVVBUS, (M0 | FSC) },
> +       {SPI1_CS1, (PEN | IDIS | M14) }, /* GPIO7_11 */
> +};
> +#endif /* _MUX_DATA_BEAGLE_X15_H_ */
> diff --git a/configs/beagle_x15_defconfig b/configs/beagle_x15_defconfig
> new file mode 100644
> index 0000000..872ab63
> --- /dev/null
> +++ b/configs/beagle_x15_defconfig
> @@ -0,0 +1,5 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_OMAP54XX=y
> ++S:CONFIG_TARGET_BEAGLE_X15=y
> diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
> new file mode 100644
> index 0000000..2009f5a
> --- /dev/null
> +++ b/include/configs/beagle_x15.h
> @@ -0,0 +1,89 @@
> +/*
> + * (C) Copyright 2014
> + * Texas Instruments Incorporated.
> + * Felipe Balbi <balbi@ti.com>
> + *
> + * Configuration settings for the TI Beagle x15 board.
> + * See ti_omap5_common.h for omap5 common settings.
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_BEAGLE_X15_H
> +#define __CONFIG_BEAGLE_X15_H
> +
> +#define CONFIG_AM57XX
> +
> +#define CONFIG_SYS_SDRAM_BASE          0x80000000
> +#define CONFIG_NR_DRAM_BANKS           2
> +
> +#define CONFIG_ENV_SIZE                        (64 << 10)
> +#define CONFIG_ENV_IS_IN_FAT
> +#define FAT_ENV_INTERFACE              "mmc"
> +#define FAT_ENV_DEVICE_AND_PART                "0:1"
> +#define FAT_ENV_FILE                   "uboot.env"
> +
> +#define CONFIG_CMD_SAVEENV
> +
> +#define CONSOLEDEV                     "ttyO2"
> +#define CONFIG_SYS_NS16550_COM1                UART1_BASE      /* Base EVM has UART0 */
> +#define CONFIG_SYS_NS16550_COM2                UART2_BASE      /* UART2 */
> +#define CONFIG_SYS_NS16550_COM3                UART3_BASE      /* UART3 */
> +#define CONFIG_BAUDRATE                        115200
> +
> +#define CONFIG_SYS_OMAP_ABE_SYSCK
> +
> +/* Define the default GPT table for eMMC */
> +#define PARTS_DEFAULT \
> +       "uuid_disk=${uuid_gpt_disk};" \
> +       "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
> +
> +#include <configs/ti_omap5_common.h>
> +
> +/* Enhance our eMMC support / experience. */
> +#define CONFIG_CMD_GPT
> +#define CONFIG_EFI_PARTITION
> +#define CONFIG_PARTITION_UUIDS
> +#define CONFIG_CMD_PART
> +
> +/* CPSW Ethernet */
> +#define CONFIG_CMD_NET                 /* 'bootp' and 'tftp' */
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_BOOTP_DNS               /* Configurable parts of CMD_DHCP */
> +#define CONFIG_BOOTP_DNS2
> +#define CONFIG_BOOTP_SEND_HOSTNAME
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_SUBNETMASK
> +#define CONFIG_NET_RETRY_COUNT         10
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_MII
> +#define CONFIG_DRIVER_TI_CPSW          /* Driver for IP block */
> +#define CONFIG_MII                     /* Required in net/eth.c */
> +#define CONFIG_PHY_GIGE                        /* per-board part of CPSW */
> +#define CONFIG_PHYLIB
> +
> +#define CONFIG_SUPPORT_EMMC_BOOT
> +
> +/* USB xHCI HOST */
> +#define CONFIG_CMD_USB
> +#define CONFIG_USB_HOST
> +#define CONFIG_USB_XHCI
> +#define CONFIG_USB_XHCI_OMAP
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
> +
> +#define CONFIG_OMAP_USB_PHY
> +#define CONFIG_OMAP_USB3PHY1_HOST
> +
> +/* SATA */
> +#define CONFIG_BOARD_LATE_INIT
> +#define CONFIG_CMD_SCSI
> +#define CONFIG_LIBATA
> +#define CONFIG_SCSI_AHCI
> +#define CONFIG_SCSI_AHCI_PLAT
> +#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
> +#define CONFIG_SYS_SCSI_MAX_LUN                1
> +#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> +                                               CONFIG_SYS_SCSI_MAX_LUN)
> +
> +#endif /* __CONFIG_BEAGLE_X5_H */
> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
> index de96d7d..c47651d 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -117,6 +117,8 @@
>                         "setenv fdtfile dra7-evm.dtb; fi;" \
>                 "if test $board_name = dra72x; then " \
>                         "setenv fdtfile dra72-evm.dtb; fi;" \
> +               "if test $board_name = beagle_x15; then " \
> +                       "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
>                 "if test $fdtfile = undefined; then " \
>                         "echo WARNING: Could not determine device tree to use; fi; \0" \
>         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
> --
> 2.1.0.GIT
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Tom Rini Nov. 10, 2014, 6:47 p.m. UTC | #2 
On Thu, Nov 06, 2014 at 08:44:27AM -0600, Felipe Balbi wrote:

> BeagleBoard-X15 is the next generation Open Source
> Hardware BeagleBoard based on TI's AM5728 SoC
> featuring dual core 1.5GHZ A15 processor. The
> platform features 2GB DDR3L (w/dual 32bit busses),
> eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60),
> separate LCD port, video In port, 4GB eMMC, uSD,
> Analog audio in/out, dual 1G Ethernet.
> 
> For more information, refer to:
> http://www.elinux.org/Beagleboard:BeagleBoard-X15
> 
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
[snip]
> +static const struct emif_regs beagle_x15_ddr3_532mhz_emif_regs = {
> +	.sdram_config_init	= 0x61851B32, /* dont know what to do about this */
> +	.sdram_config		= 0x61851B32,
> +	.sdram_config2		= 0x00000000,
> +	.ref_ctrl		= 0x00001035,
> +	.sdram_tim1		= 0xCEEF266B,
> +	.sdram_tim2		= 0x328F7FDA,
> +	.sdram_tim3		= 0x027F88A8,
> +	.read_idle_ctrl		= 0x00050001, /* not sure where in gel file */
> +	.zq_config		= 0x0007190B,
> +	.temp_alert_config	= 0x00000000,
> +	.emif_ddr_phy_ctlr_1_init = 0x0E24400A, /* not sure what to do about this */
> +	.emif_ddr_phy_ctlr_1	= 0x0E24400A, /* based on non hw level enabled */
> +	.emif_ddr_ext_phy_ctrl_1 = 0x10040100, /* not sure wherein gel file */
> +	.emif_ddr_ext_phy_ctrl_2 = 0x00740074,
> +	.emif_ddr_ext_phy_ctrl_3 = 0x00780078,
> +	.emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
> +	.emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
> +	.emif_rd_wr_lvl_rmp_win	= 0x00000000,
> +	.emif_rd_wr_lvl_rmp_ctl	= 0x00000000, /* based on non hw level enabled */
> +	.emif_rd_wr_lvl_ctl	= 0x00000000, /* not sure where based in gel file */
> +	.emif_rd_wr_exec_thresh	= 0x00000305

Lets either get the timing info right or comment that we expect to need
to tweak these values again later based on production HW or something.

> +static const u32 beagle_x15_ddr3_ext_phy_ctrl_const_regs[] = {
> +	0x00800080, // 6
> +
> +
> +	0x00360036, // 7
> +	0x00340034, // 8
> +	0x00360036, // 9
> +	0x00350035, // 10
> +	0x00350035, // 11
> +
> +	0x01ff01ff, // 12

// isn't allowed and what're you counting? :)

[snip]
> +#define CONFIG_SYS_SDRAM_BASE		0x80000000

Shouldn't be needed, should be set by a common header already.
Felipe Balbi Nov. 10, 2014, 7:43 p.m. UTC | #3 
Hi,

On Mon, Nov 10, 2014 at 01:47:48PM -0500, Tom Rini wrote:
> On Thu, Nov 06, 2014 at 08:44:27AM -0600, Felipe Balbi wrote:
> 
> > BeagleBoard-X15 is the next generation Open Source
> > Hardware BeagleBoard based on TI's AM5728 SoC
> > featuring dual core 1.5GHZ A15 processor. The
> > platform features 2GB DDR3L (w/dual 32bit busses),
> > eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60),
> > separate LCD port, video In port, 4GB eMMC, uSD,
> > Analog audio in/out, dual 1G Ethernet.
> > 
> > For more information, refer to:
> > http://www.elinux.org/Beagleboard:BeagleBoard-X15
> > 
> > Signed-off-by: Felipe Balbi <balbi@ti.com>
> > Signed-off-by: Nishanth Menon <nm@ti.com>
> [snip]
> > +static const struct emif_regs beagle_x15_ddr3_532mhz_emif_regs = {
> > +	.sdram_config_init	= 0x61851B32, /* dont know what to do about this */
> > +	.sdram_config		= 0x61851B32,
> > +	.sdram_config2		= 0x00000000,
> > +	.ref_ctrl		= 0x00001035,
> > +	.sdram_tim1		= 0xCEEF266B,
> > +	.sdram_tim2		= 0x328F7FDA,
> > +	.sdram_tim3		= 0x027F88A8,
> > +	.read_idle_ctrl		= 0x00050001, /* not sure where in gel file */
> > +	.zq_config		= 0x0007190B,
> > +	.temp_alert_config	= 0x00000000,
> > +	.emif_ddr_phy_ctlr_1_init = 0x0E24400A, /* not sure what to do about this */
> > +	.emif_ddr_phy_ctlr_1	= 0x0E24400A, /* based on non hw level enabled */
> > +	.emif_ddr_ext_phy_ctrl_1 = 0x10040100, /* not sure wherein gel file */
> > +	.emif_ddr_ext_phy_ctrl_2 = 0x00740074,
> > +	.emif_ddr_ext_phy_ctrl_3 = 0x00780078,
> > +	.emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
> > +	.emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
> > +	.emif_rd_wr_lvl_rmp_win	= 0x00000000,
> > +	.emif_rd_wr_lvl_rmp_ctl	= 0x00000000, /* based on non hw level enabled */
> > +	.emif_rd_wr_lvl_ctl	= 0x00000000, /* not sure where based in gel file */
> > +	.emif_rd_wr_exec_thresh	= 0x00000305
> 
> Lets either get the timing info right or comment that we expect to need
> to tweak these values again later based on production HW or something.

alright, I'll fix that. Apparently we have final timings now which I
got over the weekend, I'll try those out.

> > +static const u32 beagle_x15_ddr3_ext_phy_ctrl_const_regs[] = {
> > +	0x00800080, // 6
> > +
> > +
> > +	0x00360036, // 7
> > +	0x00340034, // 8
> > +	0x00360036, // 9
> > +	0x00350035, // 10
> > +	0x00350035, // 11
> > +
> > +	0x01ff01ff, // 12
> 
> // isn't allowed and what're you counting? :)

heh, forgot to drop those. Now dropped.

> [snip]
> > +#define CONFIG_SYS_SDRAM_BASE		0x80000000
> 
> Shouldn't be needed, should be set by a common header already.

dropped.
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
index 129982c..aca862d 100644
--- a/arch/arm/cpu/armv7/omap5/Kconfig
+++ b/arch/arm/cpu/armv7/omap5/Kconfig
@@ -12,6 +12,9 @@  config TARGET_OMAP5_UEVM
 config TARGET_DRA7XX_EVM
 	bool "TI DRA7XX"
 
+config TARGET_BEAGLE_X15
+	bool "BeagleBoard X15"
+
 endchoice
 
 config SYS_SOC
@@ -20,5 +23,6 @@  config SYS_SOC
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"
+source "board/ti/beagle_x15/Kconfig"
 
 endif
diff --git a/board/ti/beagle_x15/Kconfig b/board/ti/beagle_x15/Kconfig
new file mode 100644
index 0000000..a305ff1
--- /dev/null
+++ b/board/ti/beagle_x15/Kconfig
@@ -0,0 +1,12 @@ 
+if TARGET_BEAGLE_X15
+
+config SYS_BOARD
+	default "beagle_x15"
+
+config SYS_VENDOR
+	default "ti"
+
+config SYS_CONFIG_NAME
+	default "beagle_x15"
+
+endif
diff --git a/board/ti/beagle_x15/Makefile b/board/ti/beagle_x15/Makefile
new file mode 100644
index 0000000..5cd6873
--- /dev/null
+++ b/board/ti/beagle_x15/Makefile
@@ -0,0 +1,8 @@ 
+#
+# (C) Copyright 2014
+# Texas Instruments, <www.ti.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= board.o
diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
new file mode 100644
index 0000000..5cafc87
--- /dev/null
+++ b/board/ti/beagle_x15/board.c
@@ -0,0 +1,328 @@ 
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <palmas.h>
+#include <sata.h>
+#include <usb.h>
+#include <asm/omap_common.h>
+#include <asm/emif.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
+#include <asm/arch/gpio.h>
+#include <environment.h>
+
+#include "mux_data.h"
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+#include <cpsw.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+	"Board: BeagleBoard x15\n"
+};
+
+static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
+	.dmm_lisa_map_3 = 0x80740300,
+	.is_ma_present  = 0x1
+};
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+{
+	*dmm_lisa_regs = &beagle_x15_lisa_regs;
+}
+
+static const struct emif_regs beagle_x15_ddr3_532mhz_emif_regs = {
+	.sdram_config_init	= 0x61851B32, /* dont know what to do about this */
+	.sdram_config		= 0x61851B32,
+	.sdram_config2		= 0x00000000,
+	.ref_ctrl		= 0x00001035,
+	.sdram_tim1		= 0xCEEF266B,
+	.sdram_tim2		= 0x328F7FDA,
+	.sdram_tim3		= 0x027F88A8,
+	.read_idle_ctrl		= 0x00050001, /* not sure where in gel file */
+	.zq_config		= 0x0007190B,
+	.temp_alert_config	= 0x00000000,
+	.emif_ddr_phy_ctlr_1_init = 0x0E24400A, /* not sure what to do about this */
+	.emif_ddr_phy_ctlr_1	= 0x0E24400A, /* based on non hw level enabled */
+	.emif_ddr_ext_phy_ctrl_1 = 0x10040100, /* not sure wherein gel file */
+	.emif_ddr_ext_phy_ctrl_2 = 0x00740074,
+	.emif_ddr_ext_phy_ctrl_3 = 0x00780078,
+	.emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
+	.emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
+	.emif_rd_wr_lvl_rmp_win	= 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl	= 0x00000000, /* based on non hw level enabled */
+	.emif_rd_wr_lvl_ctl	= 0x00000000, /* not sure where based in gel file */
+	.emif_rd_wr_exec_thresh	= 0x00000305
+};
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+	*regs = &beagle_x15_ddr3_532mhz_emif_regs;
+}
+
+static const u32 beagle_x15_ddr3_ext_phy_ctrl_const_regs[] = {
+	0x00800080, // 6
+
+
+	0x00360036, // 7
+	0x00340034, // 8
+	0x00360036, // 9
+	0x00350035, // 10
+	0x00350035, // 11
+
+	0x01ff01ff, // 12
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+
+	0x00430043,
+	0x003e003e,
+	0x004a004a,
+	0x00470047,
+	0x00400040,
+
+	0x00000000,
+	0x00600020,
+	0x40010080,
+	0x08102040,
+
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040
+};
+
+void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
+{
+	*regs = beagle_x15_ddr3_ext_phy_ctrl_const_regs;
+	*size = ARRAY_SIZE(beagle_x15_ddr3_ext_phy_ctrl_const_regs);
+}
+
+struct vcores_data beagle_x15_volts = {
+	.mpu.value		= VDD_MPU_DRA752,
+	.mpu.efuse.reg		= STD_FUSE_OPP_VMIN_MPU_NOM,
+	.mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
+	.mpu.addr		= TPS659038_REG_ADDR_SMPS12,
+	.mpu.pmic		= &tps659038,
+
+	.eve.value		= VDD_EVE_DRA752,
+	.eve.efuse.reg		= STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.eve.addr		= TPS659038_REG_ADDR_SMPS45,
+	.eve.pmic		= &tps659038,
+
+	.gpu.value		= VDD_GPU_DRA752,
+	.gpu.efuse.reg		= STD_FUSE_OPP_VMIN_GPU_NOM,
+	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.gpu.addr		= TPS659038_REG_ADDR_SMPS45,
+	.gpu.pmic		= &tps659038,
+
+	.core.value		= VDD_CORE_DRA752,
+	.core.efuse.reg		= STD_FUSE_OPP_VMIN_CORE_NOM,
+	.core.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.core.addr		= TPS659038_REG_ADDR_SMPS6,
+	.core.pmic		= &tps659038,
+
+	.iva.value		= VDD_IVA_DRA752,
+	.iva.efuse.reg		= STD_FUSE_OPP_VMIN_IVA_NOM,
+	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.iva.addr		= TPS659038_REG_ADDR_SMPS45,
+	.iva.pmic		= &tps659038,
+};
+
+void hw_data_init(void)
+{
+	*prcm = &dra7xx_prcm;
+	*dplls_data = &dra7xx_dplls;
+	*omap_vcores = &beagle_x15_volts;
+	*ctrl = &dra7xx_ctrl;
+}
+
+int board_init(void)
+{
+	gpmc_init();
+	gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	init_sata(0);
+	/*
+	 * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
+	 * This is the POWERHOLD-in-Low behavior.
+	 */
+	palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
+	return 0;
+}
+
+static void do_set_mux32(u32 base,
+			 struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
+
+	for (i = 0; i < size; i++, pad++)
+		writel(pad->val, base + pad->offset);
+}
+
+void set_muxconf_regs_essential(void)
+{
+	do_set_mux32((*ctrl)->control_padconf_core_base,
+		     core_padconf_array_essential,
+		     sizeof(core_padconf_array_essential) /
+		     sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0, 0, 0, -1, -1);
+	omap_mmc_init(1, 0, 0, -1, -1);
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	env_init();
+	env_relocate_spec();
+	if (getenv_yesno("boot_os") != 1)
+		return 1;
+#endif
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+
+/* Delay value to add to calibrated value */
+#define RGMII0_TXCTL_DLY_VAL		((0x3 << 5) + 0x8)
+#define RGMII0_TXD0_DLY_VAL		((0x3 << 5) + 0x8)
+#define RGMII0_TXD1_DLY_VAL		((0x3 << 5) + 0x2)
+#define RGMII0_TXD2_DLY_VAL		((0x4 << 5) + 0x0)
+#define RGMII0_TXD3_DLY_VAL		((0x4 << 5) + 0x0)
+#define VIN2A_D13_DLY_VAL		((0x3 << 5) + 0x8)
+#define VIN2A_D17_DLY_VAL		((0x3 << 5) + 0x8)
+#define VIN2A_D16_DLY_VAL		((0x3 << 5) + 0x2)
+#define VIN2A_D15_DLY_VAL		((0x4 << 5) + 0x0)
+#define VIN2A_D14_DLY_VAL		((0x4 << 5) + 0x0)
+
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_addr	= 1,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_addr	= 2,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	int ret;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+	uint32_t ctrl_val;
+
+	/* try reading mac address from efuse */
+	mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
+	mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
+	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+	mac_addr[2] = mac_hi & 0xFF;
+	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+	mac_addr[5] = mac_lo & 0xFF;
+
+	if (!getenv("ethaddr")) {
+		printf("<ethaddr> not set. Validating first E-fuse MAC\n");
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
+	mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
+	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+	mac_addr[2] = mac_hi & 0xFF;
+	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+	mac_addr[5] = mac_lo & 0xFF;
+
+	if (!getenv("eth1addr")) {
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("eth1addr", mac_addr);
+	}
+
+	ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
+	ctrl_val |= 0x22;
+	writel(ctrl_val, (*ctrl)->control_core_control_io1);
+
+	ret = cpsw_register(&cpsw_data);
+	if (ret < 0)
+		printf("Error %d registering CPSW switch\n", ret);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_USB_XHCI_OMAP
+int board_usb_init(int index, enum usb_init_type init)
+{
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
+			OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M);
+
+	return 0;
+}
+#endif
diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h
new file mode 100644
index 0000000..2294abe
--- /dev/null
+++ b/board/ti/beagle_x15/mux_data.h
@@ -0,0 +1,55 @@ 
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _MUX_DATA_BEAGLE_X15_H_
+#define _MUX_DATA_BEAGLE_X15_H_
+
+#include <asm/arch/mux_dra7xx.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+	{MMC1_CLK, (IEN | PTU | PDIS | M0)},	/* MMC1_CLK */
+	{MMC1_CMD, (IEN | PTU | PDIS | M0)},	/* MMC1_CMD */
+	{MMC1_DAT0, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT0 */
+	{MMC1_DAT1, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT1 */
+	{MMC1_DAT2, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT2 */
+	{MMC1_DAT3, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT3 */
+	{MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
+	{MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+	{GPMC_A19, (IEN | PTU | PDIS | M1)},	/* mmc2_dat4 */
+	{GPMC_A20, (IEN | PTU | PDIS | M1)},	/* mmc2_dat5 */
+	{GPMC_A21, (IEN | PTU | PDIS | M1)},	/* mmc2_dat6 */
+	{GPMC_A22, (IEN | PTU | PDIS | M1)},	/* mmc2_dat7 */
+	{GPMC_A23, (IEN | PTU | PDIS | M1)},	/* mmc2_clk */
+	{GPMC_A24, (IEN | PTU | PDIS | M1)},	/* mmc2_dat0 */
+	{GPMC_A25, (IEN | PTU | PDIS | M1)},	/* mmc2_dat1 */
+	{GPMC_A26, (IEN | PTU | PDIS | M1)},	/* mmc2_dat2 */
+	{GPMC_A27, (IEN | PTU | PDIS | M1)},	/* mmc2_dat3 */
+	{GPMC_CS1, (IEN | PTU | PDIS | M1)},	/* mmm2_cmd */
+	{UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
+	{UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
+	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
+	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
+	{MDIO_MCLK, (PTU | PEN | M0)},		/* MDIO_MCLK  */
+	{MDIO_D, (IEN | PTU | PEN | M0)},	/* MDIO_D  */
+	{RGMII0_TXC, (M0) },
+	{RGMII0_TXCTL, (M0) },
+	{RGMII0_TXD3, (M0) },
+	{RGMII0_TXD2, (M0) },
+	{RGMII0_TXD1, (M0) },
+	{RGMII0_TXD0, (M0) },
+	{RGMII0_RXC, (IEN | M0) },
+	{RGMII0_RXCTL, (IEN | M0) },
+	{RGMII0_RXD3, (IEN | M0) },
+	{RGMII0_RXD2, (IEN | M0) },
+	{RGMII0_RXD1, (IEN | M0) },
+	{RGMII0_RXD0, (IEN | M0) },
+	{USB1_DRVVBUS, (M0 | FSC) },
+	{SPI1_CS1, (PEN | IDIS | M14) }, /* GPIO7_11 */
+};
+#endif /* _MUX_DATA_BEAGLE_X15_H_ */
diff --git a/configs/beagle_x15_defconfig b/configs/beagle_x15_defconfig
new file mode 100644
index 0000000..872ab63
--- /dev/null
+++ b/configs/beagle_x15_defconfig
@@ -0,0 +1,5 @@ 
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
++S:CONFIG_ARM=y
++S:CONFIG_OMAP54XX=y
++S:CONFIG_TARGET_BEAGLE_X15=y
diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
new file mode 100644
index 0000000..2009f5a
--- /dev/null
+++ b/include/configs/beagle_x15.h
@@ -0,0 +1,89 @@ 
+/*
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated.
+ * Felipe Balbi <balbi@ti.com>
+ *
+ * Configuration settings for the TI Beagle x15 board.
+ * See ti_omap5_common.h for omap5 common settings.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_BEAGLE_X15_H
+#define __CONFIG_BEAGLE_X15_H
+
+#define CONFIG_AM57XX
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_NR_DRAM_BANKS		2
+
+#define CONFIG_ENV_SIZE			(64 << 10)
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE		"mmc"
+#define FAT_ENV_DEVICE_AND_PART		"0:1"
+#define FAT_ENV_FILE			"uboot.env"
+
+#define CONFIG_CMD_SAVEENV
+
+#define CONSOLEDEV			"ttyO2"
+#define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
+#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_OMAP_ABE_SYSCK
+
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
+#include <configs/ti_omap5_common.h>
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* CPSW Ethernet */
+#define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT		10
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
+#define CONFIG_MII			/* Required in net/eth.c */
+#define CONFIG_PHY_GIGE			/* per-board part of CPSW */
+#define CONFIG_PHYLIB
+
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* USB xHCI HOST */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+
+#define CONFIG_OMAP_USB_PHY
+#define CONFIG_OMAP_USB3PHY1_HOST
+
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
+#endif /* __CONFIG_BEAGLE_X5_H */
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index de96d7d..c47651d 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -117,6 +117,8 @@ 
 			"setenv fdtfile dra7-evm.dtb; fi;" \
 		"if test $board_name = dra72x; then " \
 			"setenv fdtfile dra72-evm.dtb; fi;" \
+		"if test $board_name = beagle_x15; then " \
+			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \