From patchwork Tue Dec 1 07:08:32 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Herrenschmidt X-Patchwork-Id: 39882 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by ozlabs.org (Postfix) with ESMTP id 3E487B7C86 for ; Tue, 1 Dec 2009 18:08:39 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753328AbZLAHIb (ORCPT ); Tue, 1 Dec 2009 02:08:31 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753341AbZLAHIa (ORCPT ); Tue, 1 Dec 2009 02:08:30 -0500 Received: from ozlabs.org ([203.10.76.45]:43793 "EHLO ozlabs.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753328AbZLAHI2 (ORCPT ); Tue, 1 Dec 2009 02:08:28 -0500 Received: by ozlabs.org (Postfix, from userid 1030) id 4B1CEB7B66; Tue, 1 Dec 2009 18:08:33 +1100 (EST) To: CC: , , From: Benjamin Herrenschmidt Date: Tue, 01 Dec 2009 18:08:32 +1100 Subject: [PATCH 3/5] powerpc/macio: Rework hotplug media bay support Message-Id: <20091201070833.4B1CEB7B66@ozlabs.org> Sender: linux-ide-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/macio.h | 3 arch/powerpc/include/asm/mediabay.h | 29 +-- drivers/block/swim3.c | 39 +--- drivers/ide/pmac.c | 87 ++++++--- drivers/macintosh/mediabay.c | 328 +++++++++++++----------------------- 5 files changed, 213 insertions(+), 273 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html --- linux-work.orig/arch/powerpc/include/asm/macio.h 2009-12-01 16:51:50.000000000 +1100 +++ linux-work/arch/powerpc/include/asm/macio.h 2009-12-01 16:51:51.000000000 +1100 @@ -134,6 +134,9 @@ struct macio_driver int (*resume)(struct macio_dev* dev); int (*shutdown)(struct macio_dev* dev); +#ifdef CONFIG_PMAC_MEDIABAY + void (*mediabay_event)(struct macio_dev* dev, int mb_state); +#endif struct device_driver driver; }; #define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) Index: linux-work/arch/powerpc/include/asm/mediabay.h =================================================================== --- linux-work.orig/arch/powerpc/include/asm/mediabay.h 2009-12-01 16:51:11.000000000 +1100 +++ linux-work/arch/powerpc/include/asm/mediabay.h 2009-12-01 17:50:11.000000000 +1100 @@ -17,26 +17,31 @@ #define MB_POWER 6 /* media bay contains a Power device (???) */ #define MB_NO 7 /* media bay contains nothing */ -/* Number of bays in the machine or 0 */ -extern int media_bay_count; +struct macio_dev; -#ifdef CONFIG_BLK_DEV_IDE_PMAC -#include +#ifdef CONFIG_PMAC_MEDIABAY -int check_media_bay_by_base(unsigned long base, int what); -/* called by IDE PMAC host driver to register IDE controller for media bay */ -int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, - int irq, ide_hwif_t *hwif); - -int check_media_bay(struct device_node *which_bay, int what); +/* Check the content type of the bay, returns MB_NO if the bay is still + * transitionning + */ +extern int check_media_bay(struct macio_dev *bay); + +/* The ATA driver uses the calls below to temporarily hold on the + * media bay callbacks while initializing the interface + */ +extern void lock_media_bay(struct macio_dev *bay); +extern void unlock_media_bay(struct macio_dev *bay); #else -static inline int check_media_bay(struct device_node *which_bay, int what) +static inline int check_media_bay(struct macio_dev *bay) { - return -ENODEV; + return MB_NO; } +static inline void lock_media_bay(struct macio_dev *bay) { } +static inline void unlock_media_bay(struct macio_dev *bay) { } + #endif #endif /* __KERNEL__ */ Index: linux-work/drivers/macintosh/mediabay.c =================================================================== --- linux-work.orig/drivers/macintosh/mediabay.c 2009-12-01 16:51:11.000000000 +1100 +++ linux-work/drivers/macintosh/mediabay.c 2009-12-01 17:51:32.000000000 +1100 @@ -33,15 +33,6 @@ #include #include - -#define MB_DEBUG - -#ifdef MB_DEBUG -#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg) -#else -#define MBDBG(fmt, arg...) do { } while (0) -#endif - #define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2)) #define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r)) @@ -76,28 +67,14 @@ struct media_bay_info { int index; int cached_gpio; int sleeping; + int user_lock; struct mutex lock; -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ide_hwif_t *cd_port; - void __iomem *cd_base; - int cd_irq; - int cd_retry; -#endif -#if defined(CONFIG_BLK_DEV_IDE_PMAC) - int cd_index; -#endif }; #define MAX_BAYS 2 static struct media_bay_info media_bays[MAX_BAYS]; -int media_bay_count = 0; - -#ifdef CONFIG_BLK_DEV_IDE_PMAC -/* check the busy bit in the media-bay ide interface - (assumes the media-bay contains an ide device) */ -#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0) -#endif +static int media_bay_count = 0; /* * Wait that number of ms between each step in normal polling mode @@ -130,21 +107,11 @@ int media_bay_count = 0; /* * Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted - * (or until the device is ready) before waiting for busy bit to disappear + * (or until the device is ready) before calling into the driver */ #define MB_IDE_WAIT 1000 /* - * Timeout waiting for busy bit of an IDE device to go down - */ -#define MB_IDE_TIMEOUT 5000 - -/* - * Max retries of the full power up/down sequence for an IDE device - */ -#define MAX_CD_RETRIES 3 - -/* * States of a media bay */ enum { @@ -153,7 +120,6 @@ enum { mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */ mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */ mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */ - mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */ mb_up, /* Media bay full */ mb_powering_down /* Powering down (avoid too fast down/up) */ }; @@ -373,12 +339,12 @@ static inline void set_mb_power(struct m if (onoff) { bay->ops->power(bay, 1); bay->state = mb_powering_up; - MBDBG("mediabay%d: powering up\n", bay->index); + pr_debug("mediabay%d: powering up\n", bay->index); } else { /* Make sure everything is powered down & disabled */ bay->ops->power(bay, 0); bay->state = mb_powering_down; - MBDBG("mediabay%d: powering down\n", bay->index); + pr_debug("mediabay%d: powering down\n", bay->index); } bay->timer = msecs_to_jiffies(MB_POWER_DELAY); } @@ -387,107 +353,118 @@ static void poll_media_bay(struct media_ { int id = bay->ops->content(bay); - if (id == bay->last_value) { - if (id != bay->content_id) { - bay->value_count += msecs_to_jiffies(MB_POLL_DELAY); - if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) { - /* If the device type changes without going thru - * "MB_NO", we force a pass by "MB_NO" to make sure - * things are properly reset - */ - if ((id != MB_NO) && (bay->content_id != MB_NO)) { - id = MB_NO; - MBDBG("mediabay%d: forcing MB_NO\n", bay->index); - } - MBDBG("mediabay%d: switching to %d\n", bay->index, id); - set_mb_power(bay, id != MB_NO); - bay->content_id = id; - if (id == MB_NO) { -#ifdef CONFIG_BLK_DEV_IDE_PMAC - bay->cd_retry = 0; -#endif - printk(KERN_INFO "media bay %d is empty\n", bay->index); - } - } - } - } else { + static char *mb_content_types[] = { + "a floppy drive", + "a floppy drive", + "an unsuported audio device", + "an ATA device", + "an unsupported PCI device", + "an unknown device", + }; + + if (id != bay->last_value) { bay->last_value = id; bay->value_count = 0; + return; } -} + if (id == bay->content_id) + return; -#ifdef CONFIG_BLK_DEV_IDE_PMAC -int check_media_bay(struct device_node *which_bay, int what) -{ - int i; - - for (i=0; iofdev.node) { - if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up) - return 0; - media_bays[i].cd_index = -1; - return -EINVAL; + bay->value_count += msecs_to_jiffies(MB_POLL_DELAY); + if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) { + /* If the device type changes without going thru + * "MB_NO", we force a pass by "MB_NO" to make sure + * things are properly reset + */ + if ((id != MB_NO) && (bay->content_id != MB_NO)) { + id = MB_NO; + pr_debug("mediabay%d: forcing MB_NO\n", bay->index); } - return -ENODEV; + pr_debug("mediabay%d: switching to %d\n", bay->index, id); + set_mb_power(bay, id != MB_NO); + bay->content_id = id; + if (id >= MB_NO || id < 0) + printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index); + else + printk(KERN_INFO "mediabay%d: Bay contains %s\n", + bay->index, mb_content_types[id]); + } } -EXPORT_SYMBOL(check_media_bay); -int check_media_bay_by_base(unsigned long base, int what) +int check_media_bay(struct macio_dev *baydev) { - int i; + struct media_bay_info* bay; + int id; - for (i=0; icontent_id; + if (bay->state != mb_up) + return MB_NO; + if (id == MB_FD1) + return MB_FD; + return id; } -EXPORT_SYMBOL_GPL(check_media_bay_by_base); +EXPORT_SYMBOL_GPL(check_media_bay); -int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, - int irq, ide_hwif_t *hwif) +void lock_media_bay(struct macio_dev *baydev) { - int i; + struct media_bay_info* bay; - for (i=0; ilock); + bay->user_lock = 1; +} +EXPORT_SYMBOL_GPL(lock_media_bay); - if (bay->mdev && which_bay == bay->mdev->ofdev.node) { - int timeout = 5000, index = hwif->index; - - mutex_lock(&bay->lock); - - bay->cd_port = hwif; - bay->cd_base = (void __iomem *) base; - bay->cd_irq = irq; - - if ((MB_CD != bay->content_id) || bay->state != mb_up) { - mutex_unlock(&bay->lock); - return 0; - } - printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i); - do { - if (MB_IDE_READY(i)) { - bay->cd_index = index; - mutex_unlock(&bay->lock); - return 0; - } - mdelay(1); - } while(--timeout); - printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i); - mutex_unlock(&bay->lock); - return -ENODEV; - } +void unlock_media_bay(struct macio_dev *baydev) +{ + struct media_bay_info* bay; + + if (baydev == NULL) + return; + bay = macio_get_drvdata(baydev); + if (bay == NULL) + return; + if (bay->user_lock) { + bay->user_lock = 0; + mutex_unlock(&bay->lock); } +} +EXPORT_SYMBOL_GPL(unlock_media_bay); - return -ENODEV; +static int mb_broadcast_hotplug(struct device *dev, void *data) +{ + struct media_bay_info* bay = data; + struct macio_dev *mdev; + struct macio_driver *drv; + int state; + + if (dev->bus != &macio_bus_type) + return 0; + + state = bay->state == mb_up ? bay->content_id : MB_NO; + if (state == MB_FD1) + state = MB_FD; + mdev = to_macio_device(dev); + drv = to_macio_driver(dev->driver); + if (dev->driver && drv->mediabay_event) + drv->mediabay_event(mdev, state); + return 0; } -EXPORT_SYMBOL_GPL(media_bay_set_ide_infos); -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ static void media_bay_step(int i) { @@ -497,8 +474,8 @@ static void media_bay_step(int i) if (bay->state != mb_powering_down) poll_media_bay(bay); - /* If timer expired or polling IDE busy, run state machine */ - if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) { + /* If timer expired run state machine */ + if (bay->timer != 0) { bay->timer -= msecs_to_jiffies(MB_POLL_DELAY); if (bay->timer > 0) return; @@ -508,100 +485,50 @@ static void media_bay_step(int i) switch(bay->state) { case mb_powering_up: if (bay->ops->setup_bus(bay, bay->last_value) < 0) { - MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: device not supported (kind:%d)\n", + i, bay->content_id); set_mb_power(bay, 0); break; } bay->timer = msecs_to_jiffies(MB_RESET_DELAY); bay->state = mb_enabling_bay; - MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id); break; case mb_enabling_bay: bay->ops->un_reset(bay); bay->timer = msecs_to_jiffies(MB_SETUP_DELAY); bay->state = mb_resetting; - MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: releasing bay reset (kind:%d)\n", + i, bay->content_id); break; case mb_resetting: if (bay->content_id != MB_CD) { - MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: bay is up (kind:%d)\n", i, + bay->content_id); bay->state = mb_up; + device_for_each_child(&bay->mdev->ofdev.dev, + bay, mb_broadcast_hotplug); break; } -#ifdef CONFIG_BLK_DEV_IDE_PMAC - MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n", + i, bay->content_id); bay->ops->un_reset_ide(bay); bay->timer = msecs_to_jiffies(MB_IDE_WAIT); bay->state = mb_ide_resetting; -#else - printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i); - set_mb_power(bay, 0); -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ break; -#ifdef CONFIG_BLK_DEV_IDE_PMAC + case mb_ide_resetting: - bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT); - bay->state = mb_ide_waiting; - MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id); + pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id); + bay->state = mb_up; + device_for_each_child(&bay->mdev->ofdev.dev, + bay, mb_broadcast_hotplug); break; - case mb_ide_waiting: - if (bay->cd_base == NULL) { - bay->timer = 0; - bay->state = mb_up; - MBDBG("mediabay%d: up before IDE init\n", i); - break; - } else if (MB_IDE_READY(i)) { - bay->timer = 0; - bay->state = mb_up; - if (bay->cd_index < 0) { - printk("mediabay %d, registering IDE...\n", i); - pmu_suspend(); - ide_port_scan(bay->cd_port); - if (bay->cd_port->present) - bay->cd_index = bay->cd_port->index; - pmu_resume(); - } - if (bay->cd_index == -1) { - /* We eventually do a retry */ - bay->cd_retry++; - printk("IDE register error\n"); - set_mb_power(bay, 0); - } else { - printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index); - MBDBG("mediabay %d IDE ready\n", i); - } - break; - } else if (bay->timer > 0) - bay->timer -= msecs_to_jiffies(MB_POLL_DELAY); - if (bay->timer <= 0) { - printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n", - i, readb(bay->cd_base + 0x70)); - MBDBG("mediabay%d: nIDE Timeout !\n", i); - set_mb_power(bay, 0); - bay->timer = 0; - } - break; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ + case mb_powering_down: bay->state = mb_empty; -#ifdef CONFIG_BLK_DEV_IDE_PMAC - if (bay->cd_index >= 0) { - printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i, - bay->cd_index); - ide_port_unregister_devices(bay->cd_port); - bay->cd_index = -1; - } - if (bay->cd_retry) { - if (bay->cd_retry > MAX_CD_RETRIES) { - /* Should add an error sound (sort of beep in dmasound) */ - printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i); - } else { - /* Force a new power down/up sequence */ - bay->content_id = MB_NO; - } - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ - MBDBG("mediabay%d: end of power down\n", i); + device_for_each_child(&bay->mdev->ofdev.dev, + bay, mb_broadcast_hotplug); + pr_debug("mediabay%d: end of power down\n", i); break; } } @@ -676,11 +603,6 @@ static int __devinit media_bay_attach(st bay->last_value = bay->ops->content(bay); bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY); bay->state = mb_empty; - do { - msleep(MB_POLL_DELAY); - media_bay_step(i); - } while((bay->state != mb_empty) && - (bay->state != mb_up)); /* Mark us ready by filling our mdev data */ macio_set_drvdata(mdev, bay); @@ -725,7 +647,7 @@ static int media_bay_resume(struct macio set_mb_power(bay, 0); msleep(MB_POWER_DELAY); if (bay->ops->content(bay) != bay->content_id) { - printk("mediabay%d: content changed during sleep...\n", bay->index); + printk("mediabay%d: Content changed during sleep...\n", bay->index); mutex_unlock(&bay->lock); return 0; } @@ -733,9 +655,6 @@ static int media_bay_resume(struct macio bay->last_value = bay->content_id; bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY); bay->timer = msecs_to_jiffies(MB_POWER_DELAY); -#ifdef CONFIG_BLK_DEV_IDE_PMAC - bay->cd_retry = 0; -#endif do { msleep(MB_POLL_DELAY); media_bay_step(bay->index); @@ -823,9 +742,6 @@ static int __init media_bay_init(void) for (i=0; itimings[2] = pmif->timings[3] = value2; } +static int on_media_bay(pmac_ide_hwif_t *pmif) +{ + return pmif->mdev && pmif->mdev->media_bay != NULL; +} + /* Suspend call back, should be called after the child devices * have actually been suspended */ @@ -866,7 +872,7 @@ static int pmac_ide_do_suspend(pmac_ide_ disable_irq(pmif->irq); /* The media bay will handle itself just fine */ - if (pmif->mediabay) + if (on_media_bay(pmif)) return 0; /* Kauai has bus control FCRs directly here */ @@ -889,7 +895,7 @@ static int pmac_ide_do_suspend(pmac_ide_ static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) { /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ - if (!pmif->mediabay) { + if (!on_media_bay(pmif)) { ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); msleep(10); @@ -950,13 +956,11 @@ static void pmac_ide_init_dev(ide_drive_ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - if (pmif->mediabay) { -#ifdef CONFIG_PMAC_MEDIABAY - if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { + if (on_media_bay(pmif)) { + if (check_media_bay(pmif->mdev->media_bay) == MB_CD) { drive->dev_flags &= ~IDE_DFLAG_NOPROBE; return; } -#endif drive->dev_flags |= IDE_DFLAG_NOPROBE; } } @@ -1072,26 +1076,22 @@ static int __devinit pmac_ide_setup_devi writel(KAUAI_FCR_UATA_MAGIC | KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr); - - pmif->mediabay = 0; /* Make sure we have sane timings */ sanitize_timings(pmif); + /* If we are on a media bay, wait for it to settle and lock it */ + lock_media_bay(pmif->mdev->media_bay); + host = ide_host_alloc(&d, hws, 1); - if (host == NULL) - return -ENOMEM; - hwif = host->ports[0]; + if (host == NULL) { + rc = -ENOMEM; + goto bail; + } + hwif = pmif->hwif = host->ports[0]; -#ifndef CONFIG_PPC64 - /* XXX FIXME: Media bay stuff need re-organizing */ - if (np->parent && np->parent->name - && strcasecmp(np->parent->name, "media-bay") == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, - hwif); -#endif /* CONFIG_PMAC_MEDIABAY */ - pmif->mediabay = 1; + if (on_media_bay(pmif)) { + /* Fixup bus ID for media bay */ if (!bidp) pmif->aapl_bus_id = 1; } else if (pmif->kind == controller_ohare) { @@ -1100,9 +1100,7 @@ static int __devinit pmac_ide_setup_devi * units, I keep the old way */ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1); - } else -#endif - { + } else { /* This is necessary to enable IDE when net-booting */ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1); ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1); @@ -1112,17 +1110,20 @@ static int __devinit pmac_ide_setup_devi } printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " - "bus ID %d%s, irq %d\n", model_name[pmif->kind], - pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hw->irq); + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + on_media_bay(pmif) ? " (mediabay)" : "", hw->irq); rc = ide_host_register(host, &d, hws); - if (rc) { - ide_host_free(host); - return rc; - } + if (rc) + pmif->hwif = NULL; - return 0; + unlock_media_bay(pmif->mdev->media_bay); + + bail: + if (rc && host) + ide_host_free(host); + return rc; } static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base) @@ -1362,6 +1363,25 @@ pmac_ide_pci_resume(struct pci_dev *pdev return rc; } +#ifdef CONFIG_PMAC_MEDIABAY +static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state) +{ + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + + switch(mb_state) { + case MB_CD: + if (!pmif->hwif->present) + ide_port_scan(pmif->hwif); + break; + default: + if (pmif->hwif->present) + ide_port_unregister_devices(pmif->hwif); + } +} +#endif /* CONFIG_PMAC_MEDIABAY */ + + static struct of_device_id pmac_ide_macio_match[] = { { @@ -1386,6 +1406,9 @@ static struct macio_driver pmac_ide_maci .probe = pmac_ide_macio_attach, .suspend = pmac_ide_macio_suspend, .resume = pmac_ide_macio_resume, +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = pmac_ide_macio_mb_event, +#endif }; static const struct pci_device_id pmac_ide_pci_match[] = { Index: linux-work/drivers/block/swim3.c =================================================================== --- linux-work.orig/drivers/block/swim3.c 2009-12-01 16:51:11.000000000 +1100 +++ linux-work/drivers/block/swim3.c 2009-12-01 16:51:51.000000000 +1100 @@ -200,7 +200,7 @@ struct floppy_state { int ejected; wait_queue_head_t wait; int wanted; - struct device_node* media_bay; /* NULL when not in bay */ + struct macio_dev *mdev; char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)]; }; @@ -303,14 +303,13 @@ static int swim3_readbit(struct floppy_s static void do_fd_request(struct request_queue * q) { int i; - for(i=0;imdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) continue; -#endif /* CONFIG_PMAC_MEDIABAY */ - start_request(&floppy_states[i]); + start_request(fs); } } @@ -849,10 +848,9 @@ static int floppy_ioctl(struct block_dev if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN)) return -EPERM; -#ifdef CONFIG_PMAC_MEDIABAY - if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD)) + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) return -ENXIO; -#endif switch (cmd) { case FDEJECT: @@ -876,10 +874,9 @@ static int floppy_open(struct block_devi int n, err = 0; if (fs->ref_count == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD)) + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) return -ENXIO; -#endif out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2); out_8(&sw->control_bic, 0xff); out_8(&sw->mode, 0x95); @@ -963,10 +960,9 @@ static int floppy_revalidate(struct gend struct swim3 __iomem *sw; int ret, n; -#ifdef CONFIG_PMAC_MEDIABAY - if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD)) + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) return -ENXIO; -#endif sw = fs->swim3; grab_drive(fs, revalidating, 0); @@ -1009,7 +1005,6 @@ static const struct block_device_operati static int swim3_add_device(struct macio_dev *mdev, int index) { struct device_node *swim = mdev->ofdev.node; - struct device_node *mediabay; struct floppy_state *fs = &floppy_states[index]; int rc = -EBUSY; @@ -1036,9 +1031,7 @@ static int swim3_add_device(struct macio } dev_set_drvdata(&mdev->ofdev.dev, fs); - mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? - swim->parent : NULL; - if (mediabay == NULL) + if (mdev->media_bay == NULL) pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1); memset(fs, 0, sizeof(*fs)); @@ -1068,7 +1061,7 @@ static int swim3_add_device(struct macio fs->secpercyl = 36; fs->secpertrack = 18; fs->total_secs = 2880; - fs->media_bay = mediabay; + fs->mdev = mdev; init_waitqueue_head(&fs->wait); fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space); @@ -1093,7 +1086,7 @@ static int swim3_add_device(struct macio init_timer(&fs->timeout); printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count, - mediabay ? "in media bay" : ""); + mdev->media_bay ? "in media bay" : ""); return 0;