| Message ID | 1412919676-25344-2-git-send-email-richard.zhu@freescale.com |
|---|---|
| State | Superseded |
| Headers | show |
On 10/10/2014 01:41 AM, Richard Zhu wrote: > From: Richard Zhu<r65037@freescale.com> > > - move "program correct class for RC" from dw_pcie_host_init() > to dw_pcie_setup_rc(). since this is RC setup, it's > better to contained in dw_pcie_setup_rc function. > Then, RC can be re-setup really by dw_pcie_setup_rc(). > - add one re-store msi data function. Because that > pcie controller maybe powered off during system suspend, > and the msi data configuration would be lost. > this functions can be used to restore the msi data > during the resume callback. > > Signed-off-by: Richard Zhu<richard.zhu@freescale.com> > --- > drivers/pci/host/pcie-designware.c | 15 ++++++++++++--- > drivers/pci/host/pcie-designware.h | 1 + > 2 files changed, 13 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 538bbf3..ae1e6c5 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -194,6 +194,13 @@ void dw_pcie_msi_init(struct pcie_port *pp) > dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); > } > > +void dw_pcie_msi_cfg_restore(struct pcie_port *pp) > +{ > + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, > + virt_to_phys((void *)pp->msi_data)); > + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); > +} Richard, dw_msi_setup_irq() has the following code for setting msi_addr if (pp->ops->get_msi_addr) msg.address_lo = pp->ops->get_msi_addr(pp); else msg.address_lo = virt_to_phys((void *)pp->msi_data); You need to do similar thing in dw_pcie_msi_cfg_restore() so that it works across old (Keystone) and newer designware h/w Murali > + > static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0) > { > int flag = 1; > @@ -570,9 +577,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > > dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); > > - /* program correct class for RC */ > - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); > - > dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4,&val); > val |= PORT_LOGIC_SPEED_CHANGE; > dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); > @@ -917,6 +921,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) > val = memlimit | membase; > dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); > > + /* program correct class for RC */ > + dw_pcie_readl_rc(pp, PCI_CLASS_REVISION,&val); > + val |= PCI_CLASS_BRIDGE_PCI<< 16; > + dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION); > + > /* setup command register */ > dw_pcie_readl_rc(pp, PCI_COMMAND,&val); > val&= 0xffff0000; > diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h > index a476e60..bb75715 100644 > --- a/drivers/pci/host/pcie-designware.h > +++ b/drivers/pci/host/pcie-designware.h > @@ -83,6 +83,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val); > int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val); > irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); > void dw_pcie_msi_init(struct pcie_port *pp); > +void dw_pcie_msi_cfg_restore(struct pcie_port *pp); > int dw_pcie_link_up(struct pcie_port *pp); > void dw_pcie_setup_rc(struct pcie_port *pp); > int dw_pcie_host_init(struct pcie_port *pp);
Hi Richard, Am Freitag, den 10.10.2014, 13:41 +0800 schrieb Richard Zhu: > From: Richard Zhu <r65037@freescale.com> > > - move "program correct class for RC" from dw_pcie_host_init() > to dw_pcie_setup_rc(). since this is RC setup, it's > better to contained in dw_pcie_setup_rc function. > Then, RC can be re-setup really by dw_pcie_setup_rc(). > - add one re-store msi data function. Because that > pcie controller maybe powered off during system suspend, > and the msi data configuration would be lost. > this functions can be used to restore the msi data > during the resume callback. > > Signed-off-by: Richard Zhu <richard.zhu@freescale.com> > --- > drivers/pci/host/pcie-designware.c | 15 ++++++++++++--- > drivers/pci/host/pcie-designware.h | 1 + > 2 files changed, 13 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 538bbf3..ae1e6c5 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -194,6 +194,13 @@ void dw_pcie_msi_init(struct pcie_port *pp) > dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); > } > > +void dw_pcie_msi_cfg_restore(struct pcie_port *pp) > +{ > + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, > + virt_to_phys((void *)pp->msi_data)); > + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); > +} > + > static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0) > { > int flag = 1; > @@ -570,9 +577,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > > dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); > > - /* program correct class for RC */ > - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); > - > dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); > val |= PORT_LOGIC_SPEED_CHANGE; > dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); > @@ -917,6 +921,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) > val = memlimit | membase; > dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); > > + /* program correct class for RC */ > + dw_pcie_readl_rc(pp, PCI_CLASS_REVISION, &val); > + val |= PCI_CLASS_BRIDGE_PCI << 16; > + dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION); > + I've already said on the last revision of this patch that you should not change the way this setup is done, but just move it. Please make sure to be more careful when resending your patches. Silently dropping the review feedback is wasting everyones time. So this patch is still clearly a NACK. > /* setup command register */ > dw_pcie_readl_rc(pp, PCI_COMMAND, &val); > val &= 0xffff0000; > diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h > index a476e60..bb75715 100644 > --- a/drivers/pci/host/pcie-designware.h > +++ b/drivers/pci/host/pcie-designware.h > @@ -83,6 +83,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val); > int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val); > irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); > void dw_pcie_msi_init(struct pcie_port *pp); > +void dw_pcie_msi_cfg_restore(struct pcie_port *pp); > int dw_pcie_link_up(struct pcie_port *pp); > void dw_pcie_setup_rc(struct pcie_port *pp); > int dw_pcie_host_init(struct pcie_port *pp); -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Murali: Thanks for your comments. And, sorry to miss your review comemnt before. > -----Original Message----- > From: Murali Karicheri [mailto:m-karicheri2@ti.com] > Sent: Friday, October 10, 2014 10:42 PM > To: Richard Zhu > Cc: linux-pci@vger.kernel.org; Guo Shawn-R65073; festevam@gmail.com; > l.stach@pengutronix.de; tharvey@gateworks.com; Zhu Richard-R65037 > Subject: Re: [PATCH v5 1/9] PCI: designware: refine setup_rc and add msi data > restore > > On 10/10/2014 01:41 AM, Richard Zhu wrote: > > From: Richard Zhu<r65037@freescale.com> > > > > - move "program correct class for RC" from dw_pcie_host_init() to > > dw_pcie_setup_rc(). since this is RC setup, it's better to contained > > in dw_pcie_setup_rc function. > > Then, RC can be re-setup really by dw_pcie_setup_rc(). > > - add one re-store msi data function. Because that pcie controller > > maybe powered off during system suspend, and the msi data > > configuration would be lost. > > this functions can be used to restore the msi data during the resume > > callback. > > > > Signed-off-by: Richard Zhu<richard.zhu@freescale.com> > > --- > > drivers/pci/host/pcie-designware.c | 15 ++++++++++++--- > > drivers/pci/host/pcie-designware.h | 1 + > > 2 files changed, 13 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/pci/host/pcie-designware.c > > b/drivers/pci/host/pcie-designware.c > > index 538bbf3..ae1e6c5 100644 > > --- a/drivers/pci/host/pcie-designware.c > > +++ b/drivers/pci/host/pcie-designware.c > > @@ -194,6 +194,13 @@ void dw_pcie_msi_init(struct pcie_port *pp) > > dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); > > } > > > > +void dw_pcie_msi_cfg_restore(struct pcie_port *pp) { > > + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, > > + virt_to_phys((void *)pp->msi_data)); > > + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); } > Richard, > > dw_msi_setup_irq() has the following code for setting msi_addr > > if (pp->ops->get_msi_addr) > msg.address_lo = pp->ops->get_msi_addr(pp); > else > msg.address_lo = virt_to_phys((void *)pp->msi_data); > > You need to do similar thing in dw_pcie_msi_cfg_restore() so that it works > across old (Keystone) and newer designware h/w > > Murali [Richard] Thanks a lot. Accepted. > > + > > static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int > *pos0) > > { > > int flag = 1; > > @@ -570,9 +577,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > > > > dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); > > > > - /* program correct class for RC */ > > - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); > > - > > dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4,&val); > > val |= PORT_LOGIC_SPEED_CHANGE; > > dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); @@ > > -917,6 +921,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) > > val = memlimit | membase; > > dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); > > > > + /* program correct class for RC */ > > + dw_pcie_readl_rc(pp, PCI_CLASS_REVISION,&val); > > + val |= PCI_CLASS_BRIDGE_PCI<< 16; > > + dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION); > > + > > /* setup command register */ > > dw_pcie_readl_rc(pp, PCI_COMMAND,&val); > > val&= 0xffff0000; > > diff --git a/drivers/pci/host/pcie-designware.h > > b/drivers/pci/host/pcie-designware.h > > index a476e60..bb75715 100644 > > --- a/drivers/pci/host/pcie-designware.h > > +++ b/drivers/pci/host/pcie-designware.h > > @@ -83,6 +83,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int > size, u32 *val); > > int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val); > > irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); > > void dw_pcie_msi_init(struct pcie_port *pp); > > +void dw_pcie_msi_cfg_restore(struct pcie_port *pp); > > int dw_pcie_link_up(struct pcie_port *pp); > > void dw_pcie_setup_rc(struct pcie_port *pp); > > int dw_pcie_host_init(struct pcie_port *pp); > > > -- > Murali Karicheri > Linux Kernel, Texas Instruments -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/19/2014 10:59 PM, Hong-Xing.Zhu@freescale.com wrote: > Hi Murali: > Thanks for your comments. And, sorry to miss your review comemnt before. No issues. Regards, Murali > > >> -----Original Message----- >> From: Murali Karicheri [mailto:m-karicheri2@ti.com] >> Sent: Friday, October 10, 2014 10:42 PM >> To: Richard Zhu >> Cc: linux-pci@vger.kernel.org; Guo Shawn-R65073; festevam@gmail.com; >> l.stach@pengutronix.de; tharvey@gateworks.com; Zhu Richard-R65037 >> Subject: Re: [PATCH v5 1/9] PCI: designware: refine setup_rc and add msi data >> restore >> >> On 10/10/2014 01:41 AM, Richard Zhu wrote: >>> From: Richard Zhu<r65037@freescale.com> >>> >>> - move "program correct class for RC" from dw_pcie_host_init() to >>> dw_pcie_setup_rc(). since this is RC setup, it's better to contained >>> in dw_pcie_setup_rc function. >>> Then, RC can be re-setup really by dw_pcie_setup_rc(). >>> - add one re-store msi data function. Because that pcie controller >>> maybe powered off during system suspend, and the msi data >>> configuration would be lost. >>> this functions can be used to restore the msi data during the resume >>> callback. >>> >>> Signed-off-by: Richard Zhu<richard.zhu@freescale.com> >>> --- >>> drivers/pci/host/pcie-designware.c | 15 ++++++++++++--- >>> drivers/pci/host/pcie-designware.h | 1 + >>> 2 files changed, 13 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/pci/host/pcie-designware.c >>> b/drivers/pci/host/pcie-designware.c >>> index 538bbf3..ae1e6c5 100644 >>> --- a/drivers/pci/host/pcie-designware.c >>> +++ b/drivers/pci/host/pcie-designware.c >>> @@ -194,6 +194,13 @@ void dw_pcie_msi_init(struct pcie_port *pp) >>> dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); >>> } >>> >>> +void dw_pcie_msi_cfg_restore(struct pcie_port *pp) { >>> + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, >>> + virt_to_phys((void *)pp->msi_data)); >>> + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); } >> Richard, >> >> dw_msi_setup_irq() has the following code for setting msi_addr >> >> if (pp->ops->get_msi_addr) >> msg.address_lo = pp->ops->get_msi_addr(pp); >> else >> msg.address_lo = virt_to_phys((void *)pp->msi_data); >> >> You need to do similar thing in dw_pcie_msi_cfg_restore() so that it works >> across old (Keystone) and newer designware h/w >> >> Murali > [Richard] Thanks a lot. Accepted. > >>> + >>> static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int >> *pos0) >>> { >>> int flag = 1; >>> @@ -570,9 +577,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp) >>> >>> dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); >>> >>> - /* program correct class for RC */ >>> - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); >>> - >>> dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4,&val); >>> val |= PORT_LOGIC_SPEED_CHANGE; >>> dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); @@ >>> -917,6 +921,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) >>> val = memlimit | membase; >>> dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); >>> >>> + /* program correct class for RC */ >>> + dw_pcie_readl_rc(pp, PCI_CLASS_REVISION,&val); >>> + val |= PCI_CLASS_BRIDGE_PCI<< 16; >>> + dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION); >>> + >>> /* setup command register */ >>> dw_pcie_readl_rc(pp, PCI_COMMAND,&val); >>> val&= 0xffff0000; >>> diff --git a/drivers/pci/host/pcie-designware.h >>> b/drivers/pci/host/pcie-designware.h >>> index a476e60..bb75715 100644 >>> --- a/drivers/pci/host/pcie-designware.h >>> +++ b/drivers/pci/host/pcie-designware.h >>> @@ -83,6 +83,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int >> size, u32 *val); >>> int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val); >>> irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); >>> void dw_pcie_msi_init(struct pcie_port *pp); >>> +void dw_pcie_msi_cfg_restore(struct pcie_port *pp); >>> int dw_pcie_link_up(struct pcie_port *pp); >>> void dw_pcie_setup_rc(struct pcie_port *pp); >>> int dw_pcie_host_init(struct pcie_port *pp); >> >> >> -- >> Murali Karicheri >> Linux Kernel, Texas Instruments
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 538bbf3..ae1e6c5 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -194,6 +194,13 @@ void dw_pcie_msi_init(struct pcie_port *pp) dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); } +void dw_pcie_msi_cfg_restore(struct pcie_port *pp) +{ + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, + virt_to_phys((void *)pp->msi_data)); + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); +} + static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0) { int flag = 1; @@ -570,9 +577,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp) dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); - /* program correct class for RC */ - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); - dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); val |= PORT_LOGIC_SPEED_CHANGE; dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); @@ -917,6 +921,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) val = memlimit | membase; dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); + /* program correct class for RC */ + dw_pcie_readl_rc(pp, PCI_CLASS_REVISION, &val); + val |= PCI_CLASS_BRIDGE_PCI << 16; + dw_pcie_writel_rc(pp, val, PCI_CLASS_REVISION); + /* setup command register */ dw_pcie_readl_rc(pp, PCI_COMMAND, &val); val &= 0xffff0000; diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h index a476e60..bb75715 100644 --- a/drivers/pci/host/pcie-designware.h +++ b/drivers/pci/host/pcie-designware.h @@ -83,6 +83,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val); int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val); irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); void dw_pcie_msi_init(struct pcie_port *pp); +void dw_pcie_msi_cfg_restore(struct pcie_port *pp); int dw_pcie_link_up(struct pcie_port *pp); void dw_pcie_setup_rc(struct pcie_port *pp); int dw_pcie_host_init(struct pcie_port *pp);