@@ -629,6 +629,7 @@ libs-y += drivers/power/ \
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
+ drivers/power/regulator/ \
drivers/power/battery/
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
@@ -13,7 +13,6 @@ obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
obj-$(CONFIG_TWL4030_POWER) += twl4030.o
obj-$(CONFIG_TWL6030_POWER) += twl6030.o
obj-$(CONFIG_PALMAS_POWER) += palmas.o
-
obj-$(CONFIG_POWER) += power_core.o
obj-$(CONFIG_DIALOG_POWER) += power_dialog.o
obj-$(CONFIG_POWER_FSL) += power_fsl.o
new file mode 100644
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2014 Samsung Electronics
+# Przemyslaw Marczak <p.marczak@samsung.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
new file mode 100644
@@ -0,0 +1,749 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <errno.h>
+#include <dm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct max77686_regulator_info {
+ int ldo_cnt;
+ int buck_cnt;
+ struct regulator_desc ldo_desc[MAX77686_LDO_NUM + 1];
+ struct regulator_desc buck_desc[MAX77686_BUCK_NUM + 1];
+};
+
+#define MODE(_mode, _val, _name) { \
+ .mode = _mode, \
+ .reg_val = _val, \
+ .name = _name, \
+}
+
+/* LDO: 1,3,4,5,9,17,18,19,20,21,22,23,24,26,26,27 */
+static struct regulator_mode_desc max77686_ldo_mode_standby1[] = {
+ MODE(OPMODE_OFF, MAX77686_LDO_MODE_OFF, "OFF"),
+ MODE(OPMODE_LPM, MAX77686_LDO_MODE_LPM, "LPM"),
+ MODE(OPMODE_STANDBY_LPM, MAX77686_LDO_MODE_STANDBY_LPM, "ON/LPM"),
+ MODE(OPMODE_ON, MAX77686_LDO_MODE_ON, "ON"),
+};
+
+/* LDO: 2,6,7,8,10,11,12,14,15,16 */
+static struct regulator_mode_desc max77686_ldo_mode_standby2[] = {
+ MODE(OPMODE_OFF, MAX77686_LDO_MODE_OFF, "OFF"),
+ MODE(OPMODE_STANDBY, MAX77686_LDO_MODE_STANDBY, "ON/OFF"),
+ MODE(OPMODE_STANDBY_LPM, MAX77686_LDO_MODE_STANDBY_LPM, "ON/LPM"),
+ MODE(OPMODE_ON, MAX77686_LDO_MODE_ON, "ON"),
+};
+
+/* Buck: 1 */
+static struct regulator_mode_desc max77686_buck_mode_standby[] = {
+ MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"),
+ MODE(OPMODE_STANDBY, MAX77686_BUCK_MODE_STANDBY, "ON/OFF"),
+ MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"),
+};
+
+/* Buck: 2,3,4 */
+static struct regulator_mode_desc max77686_buck_mode_lpm[] = {
+ MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"),
+ MODE(OPMODE_STANDBY, MAX77686_BUCK_MODE_STANDBY, "ON/OFF"),
+ MODE(OPMODE_LPM, MAX77686_BUCK_MODE_LPM, "LPM"),
+ MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"),
+};
+
+/* Buck: 5,6,7,8,9 */
+static struct regulator_mode_desc max77686_buck_mode_onoff[] = {
+ MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"),
+ MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"),
+};
+
+static const char max77686_buck_addr[] = {
+ 0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38
+};
+
+static int max77686_buck_volt2hex(int buck, int uV)
+{
+ unsigned int hex = 0;
+ unsigned int hex_max = 0;
+
+ switch (buck) {
+ case 2:
+ case 3:
+ case 4:
+ /* hex = (uV - 600000) / 12500; */
+ hex = (uV - MAX77686_BUCK_UV_LMIN) / MAX77686_BUCK_UV_LSTEP;
+ hex_max = MAX77686_BUCK234_VOLT_MAX_HEX;
+ /**
+ * This uses voltage scaller - temporary not implemented
+ * so return just 0
+ */
+ return 0;
+ default:
+ /* hex = (uV - 750000) / 50000; */
+ hex = (uV - MAX77686_BUCK_UV_HMIN) / MAX77686_BUCK_UV_HSTEP;
+ hex_max = MAX77686_BUCK_VOLT_MAX_HEX;
+ break;
+ }
+
+ if (hex >= 0 && hex <= hex_max)
+ return hex;
+
+ error("Value: %d uV is wrong for BUCK%d", uV, buck);
+ return -EINVAL;
+}
+
+static int max77686_buck_hex2volt(int buck, int hex)
+{
+ unsigned uV = 0;
+ unsigned int hex_max = 0;
+
+ if (hex < 0)
+ goto bad_hex;
+
+ switch (buck) {
+ case 2:
+ case 3:
+ case 4:
+ hex_max = MAX77686_BUCK234_VOLT_MAX_HEX;
+ if (hex > hex_max)
+ goto bad_hex;
+
+ /* uV = hex * 12500 + 600000; */
+ uV = hex * MAX77686_BUCK_UV_LSTEP + MAX77686_BUCK_UV_LMIN;
+ break;
+ default:
+ hex_max = MAX77686_BUCK_VOLT_MAX_HEX;
+ if (hex > hex_max)
+ goto bad_hex;
+
+ /* uV = hex * 50000 + 750000; */
+ uV = hex * MAX77686_BUCK_UV_HSTEP + MAX77686_BUCK_UV_HMIN;
+ break;
+ }
+
+ return uV;
+
+bad_hex:
+ error("Value: %#x is wrong for BUCK%d", hex, buck);
+ return -EINVAL;
+}
+
+static int max77686_ldo_volt2hex(int ldo, int uV)
+{
+ unsigned int hex = 0;
+
+ switch (ldo) {
+ case 1:
+ case 2:
+ case 6:
+ case 7:
+ case 8:
+ case 15:
+ hex = (uV - MAX77686_LDO_UV_MIN) / MAX77686_LDO_UV_LSTEP;
+ /* hex = (uV - 800000) / 25000; */
+ break;
+ default:
+ hex = (uV - MAX77686_LDO_UV_MIN) / MAX77686_LDO_UV_HSTEP;
+ /* hex = (uV - 800000) / 50000; */
+ }
+
+ if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
+ return hex;
+
+ error("Value: %d uV is wrong for LDO%d", uV, ldo);
+ return -EINVAL;
+}
+
+static int max77686_ldo_hex2volt(int ldo, int hex)
+{
+ unsigned int uV = 0;
+
+ if (hex > MAX77686_LDO_VOLT_MAX_HEX)
+ goto bad_hex;
+
+ switch (ldo) {
+ case 1:
+ case 2:
+ case 6:
+ case 7:
+ case 8:
+ case 15:
+ /* uV = hex * 25000 + 800000; */
+ uV = hex * MAX77686_LDO_UV_LSTEP + MAX77686_LDO_UV_MIN;
+ break;
+ default:
+ /* uV = hex * 50000 + 800000; */
+ uV = hex * MAX77686_LDO_UV_HSTEP + MAX77686_LDO_UV_MIN;
+ }
+
+ return uV;
+
+bad_hex:
+ error("Value: %#x is wrong for ldo%d", hex, ldo);
+ return -EINVAL;
+}
+
+static int max77686_ldo_hex2mode(int ldo, int hex)
+{
+ if (hex > MAX77686_LDO_MODE_MASK)
+ return -EINVAL;
+
+ switch (hex) {
+ case MAX77686_LDO_MODE_OFF:
+ return OPMODE_OFF;
+ case MAX77686_LDO_MODE_LPM: /* == MAX77686_LDO_MODE_STANDBY: */
+ /* The same mode values but different meaning for each ldo */
+ switch (ldo) {
+ case 2:
+ case 6:
+ case 7:
+ case 8:
+ case 10:
+ case 11:
+ case 12:
+ case 14:
+ case 15:
+ case 16:
+ return OPMODE_STANDBY;
+ default:
+ return OPMODE_LPM;
+ }
+ case MAX77686_LDO_MODE_STANDBY_LPM:
+ return OPMODE_STANDBY_LPM;
+ case MAX77686_LDO_MODE_ON:
+ return OPMODE_ON;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int max77686_buck_hex2mode(int buck, int hex)
+{
+ if (hex > MAX77686_BUCK_MODE_MASK)
+ return -EINVAL;
+
+ switch (hex) {
+ case MAX77686_BUCK_MODE_OFF:
+ return OPMODE_OFF;
+ case MAX77686_BUCK_MODE_ON:
+ return OPMODE_ON;
+ case MAX77686_BUCK_MODE_STANDBY:
+ switch (buck) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ return OPMODE_STANDBY;
+ default:
+ return -EINVAL;
+ }
+ case MAX77686_BUCK_MODE_LPM:
+ switch (buck) {
+ case 2:
+ case 3:
+ case 4:
+ return OPMODE_LPM;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int max77686_get_ldo_cnt(struct udevice *dev)
+{
+ return MAX77686_LDO_NUM;
+}
+
+static int max77686_get_buck_cnt(struct udevice *dev)
+{
+ return MAX77686_BUCK_NUM;
+}
+
+struct regulator_desc *max77686_get_val_desc(struct udevice *dev, int d_type,
+ int d_num)
+{
+ struct max77686_regulator_info *dev_info;
+
+ if (!dev)
+ return NULL;
+
+ if (!dev->priv)
+ return NULL;
+
+ dev_info = dev->priv;
+
+ switch (d_type) {
+ case DESC_TYPE_LDO:
+ if (d_num < 1 || d_num > 26)
+ return NULL;
+
+ return &dev_info->ldo_desc[d_num];
+ case DESC_TYPE_BUCK:
+ if (d_num < 1 || d_num > 9)
+ return NULL;
+
+ return &dev_info->buck_desc[d_num];
+ default:
+ return NULL;
+ }
+}
+
+static struct regulator_mode_desc *
+max77686_get_mode_desc_array(struct udevice *dev, int d_type, int d_num,
+ int *d_mode_cnt)
+{
+ struct max77686_regulator_info *dev_info;
+
+ if (!dev)
+ return NULL;
+
+ if (!dev->priv)
+ return NULL;
+
+ dev_info = dev->priv;
+ *d_mode_cnt = 0;
+
+ if (d_type == DESC_TYPE_LDO) {
+ if (d_num < 1 || d_num > dev_info->ldo_cnt)
+ return NULL;
+
+ switch (d_num) {
+ case 2:
+ case 6:
+ case 7:
+ case 8:
+ case 10:
+ case 11:
+ case 12:
+ case 14:
+ case 15:
+ case 16:
+ *d_mode_cnt = ARRAY_SIZE(max77686_ldo_mode_standby2);
+ return max77686_ldo_mode_standby2;
+ default:
+ *d_mode_cnt = ARRAY_SIZE(max77686_ldo_mode_standby1);
+ return max77686_ldo_mode_standby1;
+ }
+ } else if (d_type == DESC_TYPE_BUCK) {
+ if (d_num < 1 || d_num > dev_info->buck_cnt)
+ return NULL;
+
+ switch (d_num) {
+ case 1:
+ *d_mode_cnt = ARRAY_SIZE(max77686_buck_mode_standby);
+ return max77686_buck_mode_standby;
+ case 2:
+ case 3:
+ case 4:
+ *d_mode_cnt = ARRAY_SIZE(max77686_buck_mode_lpm);
+ return max77686_buck_mode_lpm;
+ default:
+ *d_mode_cnt = ARRAY_SIZE(max77686_buck_mode_onoff);
+ return max77686_buck_mode_onoff;
+ }
+ }
+
+ return NULL;
+}
+
+static int max77686_ldo_val(struct udevice *dev, int op,
+ int ldo, int *uV)
+{
+ unsigned int val, ret, hex, adr;
+
+ if (op == PMIC_OP_GET)
+ *uV = 0;
+
+ if (ldo < 1 || ldo > 26) {
+ debug("%s: %d is wrong ldo number\n", __func__, ldo);
+ return -EINVAL;
+ }
+
+ adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
+
+ ret = pmic_reg_read(dev, adr, &val);
+ if (ret)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ val &= MAX77686_LDO_VOLT_MASK;
+ ret = max77686_ldo_hex2volt(ldo, val);
+ if (ret < 0)
+ return ret;
+ *uV = ret;
+ return 0;
+ }
+
+ hex = max77686_ldo_volt2hex(ldo, *uV);
+ if (hex < 0)
+ return -EINVAL;
+
+ val &= ~MAX77686_LDO_VOLT_MASK;
+ val |= hex;
+ ret |= pmic_reg_write(dev, adr, val);
+
+ return ret;
+}
+
+static int max77686_buck_val(struct udevice *dev, int op,
+ int buck, int *uV)
+{
+ unsigned int val, hex, ret, mask, adr;
+
+ if (buck < 1 || buck > 9) {
+ debug("%s: %d is wrong buck number\n", __func__, buck);
+ return -EINVAL;
+ }
+
+ if (op == PMIC_OP_GET)
+ *uV = 0;
+
+ /* &buck_out = ctrl + 1 */
+ adr = max77686_buck_addr[buck] + 1;
+
+ /* mask */
+ switch (buck) {
+ case 2:
+ case 3:
+ case 4:
+ /* Those uses voltage scallers - will support in the future */
+ mask = MAX77686_BUCK234_VOLT_MASK;
+ return -EPERM;
+ default:
+ mask = MAX77686_BUCK_VOLT_MASK;
+ }
+
+ ret = pmic_reg_read(dev, adr, &val);
+ if (ret)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ val &= mask;
+ ret = max77686_buck_hex2volt(buck, val);
+ if (ret < 0)
+ return ret;
+ *uV = ret;
+ return 0;
+ }
+
+ hex = max77686_buck_volt2hex(buck, *uV);
+ if (hex < 0)
+ return -EINVAL;
+
+ val &= ~mask;
+ val |= hex;
+ ret = pmic_reg_write(dev, adr, val);
+
+ return ret;
+}
+
+static int max77686_ldo_mode(struct udevice *dev, int op, int ldo, int *opmode)
+{
+ unsigned int val, ret, adr, mode;
+
+ if (op == PMIC_OP_GET)
+ *opmode = -EINVAL;
+
+ if (ldo < 1 || ldo > 26) {
+ debug("%s: %d is wrong ldo number\n", __func__, ldo);
+ return -EINVAL;
+ }
+
+ adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
+
+ ret = pmic_reg_read(dev, adr, &val);
+ if (ret)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ val &= MAX77686_LDO_MODE_MASK;
+ ret = max77686_ldo_hex2mode(ldo, val);
+ if (ret < 0)
+ return ret;
+ *opmode = ret;
+ return 0;
+ }
+
+ /* mode */
+ switch (*opmode) {
+ case OPMODE_OFF:
+ mode = MAX77686_LDO_MODE_OFF;
+ break;
+ case OPMODE_LPM:
+ switch (ldo) {
+ case 2:
+ case 6:
+ case 7:
+ case 8:
+ case 10:
+ case 11:
+ case 12:
+ case 14:
+ case 15:
+ case 16:
+ return -EINVAL;
+ default:
+ mode = MAX77686_LDO_MODE_LPM;
+ }
+ break;
+ case OPMODE_STANDBY:
+ switch (ldo) {
+ case 2:
+ case 6:
+ case 7:
+ case 8:
+ case 10:
+ case 11:
+ case 12:
+ case 14:
+ case 15:
+ case 16:
+ mode = MAX77686_LDO_MODE_STANDBY;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case OPMODE_STANDBY_LPM:
+ mode = MAX77686_LDO_MODE_STANDBY_LPM;
+ break;
+ case OPMODE_ON:
+ mode = MAX77686_LDO_MODE_ON;
+ break;
+ default:
+ mode = 0xff;
+ }
+
+ if (mode == 0xff) {
+ debug("%s: %d is not supported on LDO%d\n", __func__, *opmode,
+ ldo);
+ return -EINVAL;
+ }
+
+ val &= ~MAX77686_LDO_MODE_MASK;
+ val |= mode;
+ ret |= pmic_reg_write(dev, adr, val);
+
+ return ret;
+}
+
+static int max77686_buck_mode(struct udevice *dev, int op, int buck,
+ int *opmode)
+{
+ unsigned int val, ret, mask, adr, mode, mode_shift;
+
+ if (buck < 1 || buck > 9) {
+ debug("%s: %d is wrong buck number\n", __func__, buck);
+ return -EINVAL;
+ }
+
+ adr = max77686_buck_addr[buck];
+
+ /* mask */
+ switch (buck) {
+ case 2:
+ case 3:
+ case 4:
+ mode_shift = MAX77686_BUCK_MODE_SHIFT_2;
+ break;
+ default:
+ mode_shift = MAX77686_BUCK_MODE_SHIFT_1;
+ }
+
+ mask = MAX77686_BUCK_MODE_MASK << mode_shift;
+
+ ret = pmic_reg_read(dev, adr, &val);
+ if (ret)
+ return ret;
+
+ if (op == PMIC_OP_GET) {
+ val &= mask;
+ val >>= mode_shift;
+ ret = max77686_buck_hex2mode(buck, val);
+ if (ret < 0)
+ return ret;
+ *opmode = ret;
+ return 0;
+ }
+
+ /* mode */
+ switch (*opmode) {
+ case OPMODE_OFF:
+ mode = MAX77686_BUCK_MODE_OFF;
+ break;
+ case OPMODE_STANDBY:
+ switch (buck) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ mode = MAX77686_BUCK_MODE_STANDBY << mode_shift;
+ break;
+ default:
+ mode = 0xff;
+ }
+ break;
+ case OPMODE_LPM:
+ switch (buck) {
+ case 2:
+ case 3:
+ case 4:
+ mode = MAX77686_BUCK_MODE_LPM << mode_shift;
+ break;
+ default:
+ mode = 0xff;
+ }
+ break;
+ case OPMODE_ON:
+ mode = MAX77686_BUCK_MODE_ON << mode_shift;
+ break;
+ default:
+ mode = 0xff;
+ }
+
+ if (mode == 0xff) {
+ debug("%s: %d is not supported on BUCK%d\n", __func__, *opmode,
+ buck);
+ return -EINVAL;
+ }
+
+ val &= ~mask;
+ val |= mode;
+ ret |= pmic_reg_write(dev, adr, val);
+
+ return ret;
+}
+
+int fill_reg_desc(int offset, struct regulator_desc *desc, int reg_num,
+ int desc_type)
+{
+ const void *blob = gd->fdt_blob;
+ char *reg_name;
+ int reg_min, reg_max, len;
+
+ desc->type = desc_type;
+ desc->number = reg_num;
+
+ reg_name = (char *)fdt_getprop(blob, offset, "regulator-name", &len);
+ if (reg_name) {
+ strncpy(&desc->name[0], reg_name, DESC_NAME_LEN);
+ desc->name[DESC_NAME_LEN - 1] = '\0';
+ } else {
+ sprintf(&desc->name[0], "-");
+ }
+
+ reg_min = fdtdec_get_int(blob, offset, "regulator-min-microvolt", -1);
+ desc->min_uV = reg_min;
+
+ reg_max = fdtdec_get_int(blob, offset, "regulator-min-microvolt", -1);
+ desc->max_uV = reg_max;
+
+ return 0;
+}
+
+static int get_desc_for_compat(int regulators_node, char *compat, int desc_type,
+ struct regulator_desc *desc, int desc_num)
+{
+ const void *blob = gd->fdt_blob;
+ const char *reg_compat;
+ int compat_len = strlen(compat);
+ int reg_num;
+ int offset;
+ int cnt = 0;
+
+ /* First subnode of "voltage_regulators" node */
+ offset = fdt_first_subnode(blob, regulators_node);
+
+ while (offset > 0) {
+ /* Get regulator properties */
+ reg_compat = (char *)fdt_getprop(blob, offset,
+ "regulator-compatible", NULL);
+
+ /* Check compat and compare the number only */
+ reg_num = 0;
+ if (strstr(reg_compat, compat))
+ reg_num = simple_strtoul(reg_compat + compat_len,
+ NULL, 0);
+ else
+ goto next_offset;
+
+ if (reg_num && reg_num <= desc_num)
+ fill_reg_desc(offset, &desc[reg_num], reg_num,
+ desc_type);
+
+ cnt++;
+ if (cnt == desc_num)
+ return cnt;
+
+next_offset:
+ offset = fdt_next_subnode(blob, offset);
+ }
+
+ return cnt;
+}
+
+static int reg_max77686_ofdata_to_platdata(struct udevice *dev)
+{
+ struct max77686_regulator_info *dev_info = dev->priv;
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+ int offset;
+
+ if (!dev->platdata) {
+ error("Device %s: no platdata", dev->name);
+ return 0;
+ }
+
+ if (node < 0) {
+ error("Device: %s - bad of_offset", dev->name);
+ return 0;
+ }
+
+ offset = fdt_subnode_offset(blob, node, "voltage-regulators");
+ if (offset < 0) {
+ error("Node %s has no 'voltage-regulators' subnode", dev->name);
+ return 0;
+ }
+
+ dev_info->ldo_cnt = get_desc_for_compat(offset, "LDO", DESC_TYPE_LDO,
+ dev_info->ldo_desc,
+ MAX77686_LDO_NUM);
+
+ dev_info->buck_cnt = get_desc_for_compat(offset, "BUCK", DESC_TYPE_BUCK,
+ dev_info->buck_desc,
+ MAX77686_BUCK_NUM);
+
+ /* Even if there is no voltage regulators node in dts,
+ * always return success and allow the driver to bind.
+ * Then we can still do read/write pmic registers.
+ */
+ return 0;
+}
+
+static const struct dm_regulator_ops reg_max77686_ops = {
+ .get_ldo_cnt = max77686_get_ldo_cnt,
+ .get_buck_cnt = max77686_get_buck_cnt,
+ .get_val_desc = max77686_get_val_desc,
+ .get_mode_desc_array = max77686_get_mode_desc_array,
+ .ldo_val = max77686_ldo_val,
+ .buck_val = max77686_buck_val,
+ .ldo_mode = max77686_ldo_mode,
+ .buck_mode = max77686_buck_mode,
+};
+
+U_BOOT_DRIVER(max77686_regulator) = {
+ .name = "max77686 regulator",
+ .id = UCLASS_PMIC_REGULATOR,
+ .ops = ®_max77686_ops,
+ .ofdata_to_platdata = reg_max77686_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct max77686_regulator_info),
+};
@@ -8,8 +8,6 @@
#ifndef __MAX77686_H_
#define __MAX77686_H_
-#include <power/pmic.h>
-
enum {
MAX77686_REG_PMIC_ID = 0x0,
MAX77686_REG_PMIC_INTSRC,
@@ -126,7 +124,10 @@ enum {
};
/* I2C device address for pmic max77686 */
-#define MAX77686_I2C_ADDR (0x12 >> 1)
+#define MAX77686_I2C_ADDR (0x12 >> 1)
+#define MAX77686_LDO_NUM 26
+#define MAX77686_BUCK_NUM 9
+#define MAX77686_DESC_NUM (MAX77686_LDO_NUM + MAX77686_BUCK_NUM)
enum {
REG_DISABLE = 0,
@@ -143,22 +144,30 @@ enum {
enum {
OPMODE_OFF = 0,
- OPMODE_STANDBY,
OPMODE_LPM,
+ OPMODE_STANDBY,
+ OPMODE_STANDBY_LPM,
OPMODE_ON,
};
+#ifdef CONFIG_POWER
int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
+#endif
#define MAX77686_LDO_VOLT_MAX_HEX 0x3f
#define MAX77686_LDO_VOLT_MASK 0x3f
#define MAX77686_LDO_MODE_MASK 0xc0
#define MAX77686_LDO_MODE_OFF (0x00 << 0x06)
+#define MAX77686_LDO_MODE_LPM (0x01 << 0x06)
#define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06)
-#define MAX77686_LDO_MODE_LPM (0x02 << 0x06)
+#define MAX77686_LDO_MODE_STANDBY_LPM (0x02 << 0x06)
#define MAX77686_LDO_MODE_ON (0x03 << 0x06)
+#define MAX77686_BUCK234_VOLT_MAX_HEX 0xff
+#define MAX77686_BUCK234_VOLT_MASK 0xff
+#define MAX77686_BUCK_VOLT_MAX_HEX 0x3f
+#define MAX77686_BUCK_VOLT_MASK 0x3f
#define MAX77686_BUCK_MODE_MASK 0x03
#define MAX77686_BUCK_MODE_SHIFT_1 0x00
#define MAX77686_BUCK_MODE_SHIFT_2 0x04
@@ -167,6 +176,15 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
#define MAX77686_BUCK_MODE_LPM 0x02
#define MAX77686_BUCK_MODE_ON 0x03
+/* For regulator hex<->volt conversion */
+#define MAX77686_LDO_UV_MIN 800000 /* Minimum LDO uV value */
+#define MAX77686_LDO_UV_LSTEP 25000 /* uV lower value step */
+#define MAX77686_LDO_UV_HSTEP 50000 /* uV higher value step */
+#define MAX77686_BUCK_UV_LMIN 600000 /* Lower minimun BUCK value */
+#define MAX77686_BUCK_UV_HMIN 750000 /* Higher minimun BUCK value */
+#define MAX77686_BUCK_UV_LSTEP 12500 /* uV lower value step */
+#define MAX77686_BUCK_UV_HSTEP 50000 /* uV higher value step */
+
/* Buck1 1 volt value */
#define MAX77686_BUCK1OUT_1V 0x5
/* Buck1 1.05 volt value */
This commit adds support to max77686 regulator driver based on a uclass regulator driver-model api, which provides implementation of all uclass regulator api function calls. New file: drivers/power/regulator/max77686.c New config: CONFIG_DM_REGULATOR_MAX77686 Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> --- Makefile | 1 + drivers/power/Makefile | 1 - drivers/power/regulator/Makefile | 8 + drivers/power/regulator/max77686.c | 749 +++++++++++++++++++++++++++++++++++++ include/power/max77686_pmic.h | 28 +- 5 files changed, 781 insertions(+), 6 deletions(-) create mode 100644 drivers/power/regulator/Makefile create mode 100644 drivers/power/regulator/max77686.c