diff mbox

[23/44] power/reset: qnap-poweroff: Register with kernel poweroff handler

Message ID 1412659726-29957-24-git-send-email-linux@roeck-us.net (mailing list archive)
State Not Applicable
Headers show

Commit Message

Guenter Roeck Oct. 7, 2014, 5:28 a.m. UTC
Register with kernel poweroff handler instead of setting pm_power_off
directly. Register with default priority value of 128 to reflect that
the original code generates an error if another poweroff handler has
already been registered when the driver is loaded.

Cc: Sebastian Reichel <sre@kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/power/reset/qnap-poweroff.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

Comments

Andrew Lunn Oct. 7, 2014, 4:02 p.m. UTC | #1
On Mon, Oct 06, 2014 at 10:28:25PM -0700, Guenter Roeck wrote:
> Register with kernel poweroff handler instead of setting pm_power_off
> directly. Register with default priority value of 128 to reflect that
> the original code generates an error if another poweroff handler has
> already been registered when the driver is loaded.
> 
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Acked-by: Andrew Lunn <andrew@lunn.ch>

Thanks
	Andrew

> ---
>  drivers/power/reset/qnap-poweroff.c | 28 ++++++++++++++--------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
> index a75db7f..c474980 100644
> --- a/drivers/power/reset/qnap-poweroff.c
> +++ b/drivers/power/reset/qnap-poweroff.c
> @@ -16,7 +16,9 @@
>  
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> +#include <linux/notifier.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm.h>
>  #include <linux/serial_reg.h>
>  #include <linux/kallsyms.h>
>  #include <linux/of.h>
> @@ -55,7 +57,8 @@ static void __iomem *base;
>  static unsigned long tclk;
>  static const struct power_off_cfg *cfg;
>  
> -static void qnap_power_off(void)
> +static int qnap_power_off(struct notifier_block *this, unsigned long unused1,
> +			  void *unused2)
>  {
>  	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
>  
> @@ -72,14 +75,20 @@ static void qnap_power_off(void)
>  
>  	/* send the power-off command to PIC */
>  	writel(cfg->cmd, UART1_REG(TX));
> +
> +	return NOTIFY_DONE;
>  }
>  
> +static struct notifier_block qnap_poweroff_nb = {
> +	.notifier_call = qnap_power_off,
> +	.priority = 128,
> +};
> +
>  static int qnap_power_off_probe(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node;
>  	struct resource *res;
>  	struct clk *clk;
> -	char symname[KSYM_NAME_LEN];
>  
>  	const struct of_device_id *match =
>  		of_match_node(qnap_power_off_of_match_table, np);
> @@ -106,22 +115,13 @@ static int qnap_power_off_probe(struct platform_device *pdev)
>  
>  	tclk = clk_get_rate(clk);
>  
> -	/* Check that nothing else has already setup a handler */
> -	if (pm_power_off) {
> -		lookup_symbol_name((ulong)pm_power_off, symname);
> -		dev_err(&pdev->dev,
> -			"pm_power_off already claimed %p %s",
> -			pm_power_off, symname);
> -		return -EBUSY;
> -	}
> -	pm_power_off = qnap_power_off;
> -
> -	return 0;
> +	return register_poweroff_handler(&qnap_poweroff_nb);
>  }
>  
>  static int qnap_power_off_remove(struct platform_device *pdev)
>  {
> -	pm_power_off = NULL;
> +	unregister_poweroff_handler(&qnap_poweroff_nb);
> +
>  	return 0;
>  }
>  
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index a75db7f..c474980 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -16,7 +16,9 @@ 
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/notifier.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/serial_reg.h>
 #include <linux/kallsyms.h>
 #include <linux/of.h>
@@ -55,7 +57,8 @@  static void __iomem *base;
 static unsigned long tclk;
 static const struct power_off_cfg *cfg;
 
-static void qnap_power_off(void)
+static int qnap_power_off(struct notifier_block *this, unsigned long unused1,
+			  void *unused2)
 {
 	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
 
@@ -72,14 +75,20 @@  static void qnap_power_off(void)
 
 	/* send the power-off command to PIC */
 	writel(cfg->cmd, UART1_REG(TX));
+
+	return NOTIFY_DONE;
 }
 
+static struct notifier_block qnap_poweroff_nb = {
+	.notifier_call = qnap_power_off,
+	.priority = 128,
+};
+
 static int qnap_power_off_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct clk *clk;
-	char symname[KSYM_NAME_LEN];
 
 	const struct of_device_id *match =
 		of_match_node(qnap_power_off_of_match_table, np);
@@ -106,22 +115,13 @@  static int qnap_power_off_probe(struct platform_device *pdev)
 
 	tclk = clk_get_rate(clk);
 
-	/* Check that nothing else has already setup a handler */
-	if (pm_power_off) {
-		lookup_symbol_name((ulong)pm_power_off, symname);
-		dev_err(&pdev->dev,
-			"pm_power_off already claimed %p %s",
-			pm_power_off, symname);
-		return -EBUSY;
-	}
-	pm_power_off = qnap_power_off;
-
-	return 0;
+	return register_poweroff_handler(&qnap_poweroff_nb);
 }
 
 static int qnap_power_off_remove(struct platform_device *pdev)
 {
-	pm_power_off = NULL;
+	unregister_poweroff_handler(&qnap_poweroff_nb);
+
 	return 0;
 }