@@ -941,7 +941,8 @@ u-boot-nand.gph: u-boot.bin FORCE
ifneq ($(CONFIG_SUNXI),)
OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
+ u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
$(call if_changed,pad_cat)
endif
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_SUN7I) += sun7i-a20-pcduino3.dtb
dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
@@ -21,6 +21,7 @@ F: configs/A20-OLinuXino_MICRO_defconfig
F: configs/Bananapi_defconfig
F: configs/i12-tvbox_defconfig
F: configs/Linksprite_pcDuino3_defconfig
+F: configs/Linksprite_pcDuino3_fdt_defconfig
F: configs/qt840a_defconfig
CUBIEBOARD2 BOARD
new file mode 100644
@@ -0,0 +1,8 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PCDUINO3,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI,DM"
+CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SUN7I=y
@@ -36,6 +36,10 @@
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_SYS_CLK_FREQ 24000000
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
+# define CONFIG_CMD_DM
+#endif
+
/*
* Include common sunxi configuration where most the settings are
*/
For now we won't want to mess with the existing configurations. Create a new one which will enable device tree and driver model. Note that this brings the device tree binary into u-boot-sunxi-with-spl.bin. Signed-off-by: Simon Glass <sjg@chromium.org> --- Makefile | 3 ++- arch/arm/dts/Makefile | 1 + board/sunxi/MAINTAINERS | 1 + configs/Linksprite_pcDuino3_fdt_defconfig | 8 ++++++++ include/configs/sun7i.h | 4 ++++ 5 files changed, 16 insertions(+), 1 deletion(-) create mode 100644 configs/Linksprite_pcDuino3_fdt_defconfig