diff mbox

[U-Boot] powerpc/mpc85xx:Update RESET_VECTOR_ADDRESS for 768KB u-boot size

Message ID 1411969475-11142-1-git-send-email-ruchika.gupta@freescale.com
State Accepted
Delegated to: York Sun
Headers show

Commit Message

Ruchika Gupta Sept. 29, 2014, 5:44 a.m. UTC
U-boot binary size has been increased from 512KB to 768KB.

So update CONFIG_RESET_VECTOR_ADDRESS to reflect the same for
P1010 SPI Flash Secure boot target.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
---
 include/configs/P1010RDB.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

York Sun Sept. 29, 2014, 4:48 p.m. UTC | #1
On 09/28/2014 10:44 PM, Ruchika Gupta wrote:
> U-boot binary size has been increased from 512KB to 768KB.
> 
> So update CONFIG_RESET_VECTOR_ADDRESS to reflect the same for
> P1010 SPI Flash Secure boot target.
> 
> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
> ---
>  include/configs/P1010RDB.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
> index 54365a2..7039da4 100644
> --- a/include/configs/P1010RDB.h
> +++ b/include/configs/P1010RDB.h
> @@ -53,7 +53,7 @@
>  #ifdef CONFIG_SECURE_BOOT
>  #define CONFIG_RAMBOOT_SPIFLASH
>  #define CONFIG_SYS_TEXT_BASE		0x11000000
> -#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
> +#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
>  #else
>  #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
>  #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
> 

Subject could be more specific. But this doesn't warrant another version. I can
fix it when applying it.

York
diff mbox

Patch

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 54365a2..7039da4 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -53,7 +53,7 @@ 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
 #else
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT