[05/30] test: virtio-blk: check if hot-plug/unplug works

since virtio-blk-pci is a PCI device, its unplug is async
and handled by ACPI. So simultate device's ACPI _EJ0
method to trigger actual device removal.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
 tests/virtio-blk-test.c | 75 +++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 64 insertions(+), 11 deletions(-)

Il 24/09/2014 13:47, Igor Mammedov ha scritto:
> since virtio-blk-pci is a PCI device, its unplug is async
> and handled by ACPI. So simultate device's ACPI _EJ0
> method to trigger actual device removal.
> 
> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> ---
>  tests/virtio-blk-test.c | 75 +++++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 64 insertions(+), 11 deletions(-)
> 
> diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
> index 588666c..b42c10b 100644
> --- a/tests/virtio-blk-test.c
> +++ b/tests/virtio-blk-test.c
> @@ -45,6 +45,10 @@
>  #define PCI_SLOT                0x04
>  #define PCI_FN                  0x00
>  
> +#define PCI_SLOT_HP             0x06
> +#define ACPI_PCIHP_ADDR         0xae00
> +#define PCI_EJ_BASE             0x0008
> +
>  typedef struct QVirtioBlkReq {
>      uint32_t type;
>      uint32_t ioprio;
> @@ -55,7 +59,7 @@ typedef struct QVirtioBlkReq {
>  
>  static QPCIBus *test_start(void)
>  {
> -    char cmdline[100];
> +    char *cmdline;
>      char tmp_path[] = "/tmp/qtest.XXXXXX";
>      int fd, ret;
>  
> @@ -66,11 +70,14 @@ static QPCIBus *test_start(void)
>      g_assert_cmpint(ret, ==, 0);
>      close(fd);
>  
> -    snprintf(cmdline, 100, "-drive if=none,id=drive0,file=%s "
> -                            "-device virtio-blk-pci,drive=drive0,addr=%x.%x",
> -                            tmp_path, PCI_SLOT, PCI_FN);
> +    cmdline = g_strdup_printf("-drive if=none,id=drive0,file=%s "
> +                              "-drive if=none,id=drive1,file=/dev/null "
> +                              "-device virtio-blk-pci,id=drv0,drive=drive0,"
> +                              "addr=%x.%x",
> +                              tmp_path, PCI_SLOT, PCI_FN);
>      qtest_start(cmdline);
>      unlink(tmp_path);
> +    g_free(cmdline);
>  
>      return qpci_init_pc();
>  }
> @@ -80,14 +87,14 @@ static void test_end(void)
>      qtest_end();
>  }
>  
> -static QVirtioPCIDevice *virtio_blk_init(QPCIBus *bus)
> +static QVirtioPCIDevice *virtio_blk_init(QPCIBus *bus, int slot)
>  {
>      QVirtioPCIDevice *dev;
>  
>      dev = qvirtio_pci_device_find(bus, QVIRTIO_BLK_DEVICE_ID);
>      g_assert(dev != NULL);
>      g_assert_cmphex(dev->vdev.device_type, ==, QVIRTIO_BLK_DEVICE_ID);
> -    g_assert_cmphex(dev->pdev->devfn, ==, ((PCI_SLOT << 3) | PCI_FN));
> +    g_assert_cmphex(dev->pdev->devfn, ==, ((slot << 3) | PCI_FN));
>  
>      qvirtio_pci_device_enable(dev);
>      qvirtio_reset(&qvirtio_pci, &dev->vdev);
> @@ -147,7 +154,7 @@ static void pci_basic(void)
>  
>      bus = test_start();
>  
> -    dev = virtio_blk_init(bus);
> +    dev = virtio_blk_init(bus, PCI_SLOT);
>  
>      /* MSI-X is not enabled */
>      addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
> @@ -293,7 +300,7 @@ static void pci_indirect(void)
>  
>      bus = test_start();
>  
> -    dev = virtio_blk_init(bus);
> +    dev = virtio_blk_init(bus, PCI_SLOT);
>  
>      /* MSI-X is not enabled */
>      addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
> @@ -384,7 +391,7 @@ static void pci_config(void)
>  
>      bus = test_start();
>  
> -    dev = virtio_blk_init(bus);
> +    dev = virtio_blk_init(bus, PCI_SLOT);
>  
>      /* MSI-X is not enabled */
>      addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
> @@ -426,7 +433,7 @@ static void pci_msix(void)
>      bus = test_start();
>      alloc = pc_alloc_init();
>  
> -    dev = virtio_blk_init(bus);
> +    dev = virtio_blk_init(bus, PCI_SLOT);
>      qpci_msix_enable(dev->pdev);
>  
>      qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0);
> @@ -536,7 +543,7 @@ static void pci_idx(void)
>      bus = test_start();
>      alloc = pc_alloc_init();
>  
> -    dev = virtio_blk_init(bus);
> +    dev = virtio_blk_init(bus, PCI_SLOT);
>      qpci_msix_enable(dev->pdev);
>  
>      qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0);
> @@ -640,6 +647,51 @@ static void pci_idx(void)
>      test_end();
>  }
>  
> +static void hotplug(void)
> +{
> +    QDict *response;
> +    QPCIBus *bus;
> +    QVirtioPCIDevice *dev;
> +    bus = test_start();
> +
> +    /* plug secondary disk */
> +    response = qmp("{\"execute\": \"device_add\","
> +                   " \"arguments\": {"
> +                   "   \"driver\": \"virtio-blk-pci\","
> +                   "   \"drive\": \"drive1\","
> +                   "   \"addr\": \"" stringify(PCI_SLOT_HP) "\","
> +                   "   \"id\": \"drv1\""
> +                   "}}");
> +
> +    g_assert(response);
> +    g_assert(!qdict_haskey(response, "error"));
> +    QDECREF(response);
> +
> +    dev = virtio_blk_init(bus, PCI_SLOT_HP);
> +    g_assert(dev);
> +    qvirtio_pci_device_disable(dev);
> +    g_free(dev);
> +
> +    /* unplug secondary disk */
> +    response = qmp("{\"execute\": \"device_del\","
> +                   " \"arguments\": {"
> +                   "   \"id\": \"drv1\""
> +                   "}}");
> +
> +    g_assert(response);
> +    g_assert(!qdict_haskey(response, "error"));
> +    QDECREF(response);
> +
> +    outb(ACPI_PCIHP_ADDR + PCI_EJ_BASE, 1 << PCI_SLOT_HP);

Code duplication alarm! :)

Paolo

> +    /* check DEVICE_DELETED event */
> +    response = qmp("");
> +    g_assert(qdict_haskey(response, "event"));
> +    g_assert(!strcmp(qdict_get_str(response, "event"), "DEVICE_DELETED"));
> +
> +    test_end();
> +}
> +
>  int main(int argc, char **argv)
>  {
>      int ret;
> @@ -651,6 +703,7 @@ int main(int argc, char **argv)
>      g_test_add_func("/virtio/blk/pci/config", pci_config);
>      g_test_add_func("/virtio/blk/pci/msix", pci_msix);
>      g_test_add_func("/virtio/blk/pci/idx", pci_idx);
> +    g_test_add_func("/virtio/blk/pci/hotplug", hotplug);
>  
>      ret = g_test_run();
>  
>