@@ -296,7 +296,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
struct bcmgenet_priv *priv = netdev_priv(dev);
struct device_node *dn = priv->pdev->dev.of_node;
struct phy_device *phydev;
- unsigned int phy_flags;
int ret;
if (priv->phydev) {
@@ -338,15 +337,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
return ret;
}
- phy_flags = PHY_BRCM_100MBPS_WAR;
-
- /* workarounds are only needed for 100Mpbs PHYs, and
- * never on GENET V1 hardware
- */
- if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv))
- phy_flags = 0;
-
- phydev->dev_flags |= phy_flags;
phydev->advertising = phydev->supported;
/* The internal PHY has its link interrupts routed to the
@@ -40,7 +40,6 @@
#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000
#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000
/* Broadcom BCM7xxx specific workarounds */
-#define PHY_BRCM_100MBPS_WAR 0x00010000
#define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff)
#define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff)
#define PHY_BCM_FLAGS_VALID 0x80000000
Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we can remove it from the GENET driver and the broadcom shared header file. The PHY driver checks the PHY supported bitmask instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 10 ---------- include/linux/brcmphy.h | 1 - 2 files changed, 11 deletions(-)