new file mode 100644
@@ -0,0 +1,27 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-sabresd"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabresd"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
This is very similar to freescale_imx6qsabresd_defconfig, which supports the i.MX6Q ("Quad", quad core CPU) version of the board, except it supports the i.MX6DL (DualLite, dual core CPU) version. The differences are in the U-boot configuration and the device tree file. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Gilles Talis <gilles.talis@gmail.com> Cc: Gary Bisson <bisson.gary@gmail.com> Cc: Vincent Stehlé <vincent.stehle@freescale.com> --- Changes since v3: - rebased on current master. Changes since v2: nothing. Changes since v1: nothing. --- configs/freescale_imx6dlsabresd_defconfig | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 configs/freescale_imx6dlsabresd_defconfig