@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012-2014 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
@@ -23,7 +23,8 @@
#include <netdev.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
-
+#include <power/pmic.h>
+#include "../common/pfuze.h"
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
@@ -43,6 +44,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+#define I2C_PMIC 1
+
int dram_init(void)
{
gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024;
@@ -259,6 +262,18 @@ int board_init(void)
return 0;
}
+static int pfuze_init(void)
+{
+ struct pmic *p;
+
+ p = pfuze_common_init(I2C_PMIC);
+ if (!p)
+ return -ENODEV;
+
+ return 0;
+}
+
+
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
@@ -272,6 +287,7 @@ int board_late_init(void)
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
+ pfuze_init();
return 0;
}
@@ -40,6 +40,12 @@
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+
#define CONFIG_OF_SEPARATE
#define CONFIG_DEFAULT_DEVICE_TREE imx6q-sabreauto
Initialize the pfuze100 at board late init. Signed-off-by: Ye.Li <B37916@freescale.com> --- Changes since v1: - Factorize the pfuze init function for sabre boards. board/freescale/mx6qsabreauto/mx6qsabreauto.c | 20 ++++++++++++++++++-- include/configs/mx6qsabreauto.h | 6 ++++++ 2 files changed, 24 insertions(+), 2 deletions(-)