@@ -181,9 +181,10 @@ External interrupts:
fsl,mpc5200-mscan nodes
-----------------------
In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock shall be used for the bus:
+also specify which clock source shall be used for the controller:
-- fsl,mscan-clk-src - a string describing the clock source. Valid values
- are "ip" for IP_CLK and "sys" for SYS_XTAL.
- "sys" is the default in case the property is not
+- fsl,mscan-clock-source- a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock (XTAL)
+ "ref" is default in case this property is not
present.
@@ -130,7 +130,7 @@ static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
* choice as it has less jitter. For this reason, it is selected
* by default.
*/
- clk_src = of_get_property(np, "fsl,mscan-clk-src", NULL);
+ clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
if (clk_src && strcmp(clk_src, "ip") == 0)
clock_src = MSCAN_CLKSRC_BUS;
else
@@ -227,7 +227,6 @@ static int mpc5xxx_can_resume(struct of_device *ofdev)
static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
{.compatible = "fsl,mpc5200-mscan"},
- {.compatible = "fsl,mpc5200b-mscan"},
{},
};
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: devicetree-discuss@ozlabs.org --- Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 9 +++++---- drivers/net/can/mscan/mpc52xx_can.c | 3 +-- 2 files changed, 6 insertions(+), 6 deletions(-)