[2/2] Documentation: DT bindings for AXM55xx SSP CS
diff mbox

Message ID 1409576021-24828-3-git-send-email-anders.berg@avagotech.com
State Awaiting Upstream
Headers show

Commit Message

Anders Berg Sept. 1, 2014, 12:53 p.m. UTC
Bindings and documentation for AXM55xx SSP chip select controller.

Signed-off-by: Anders Berg <anders.berg@avagotech.com>
---
 .../devicetree/bindings/gpio/gpio-axxia-sspcs.txt  | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt

Comments

Linus Walleij Sept. 4, 2014, 5:05 p.m. UTC | #1
I bet Mark and linux-spi are interested in this patch too.

Yours,
Linus Walleij

On Mon, Sep 1, 2014 at 2:53 PM, Anders Berg <anders.berg@avagotech.com> wrote:
> Bindings and documentation for AXM55xx SSP chip select controller.
>
> Signed-off-by: Anders Berg <anders.berg@avagotech.com>
> ---
>  .../devicetree/bindings/gpio/gpio-axxia-sspcs.txt  | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt b/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
> new file mode 100644
> index 0000000..a64c695
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
> @@ -0,0 +1,36 @@
> +* Axxia SSP GPIO chip-select driver
> +
> +The Axxia device has a ARM PL022 Prime Cell SSP controller with an extension of
> +five chip select signals that may be controlled by software. This driver
> +exports them as GPIOs.
> +
> +Required properties:
> +
> +  * compatible: should be "lsi,ssp-gpio"
> +  * reg: address of the chip select control register.
> +  * gpio-controller: mark the device as gpio controller
> +  * #gpio-cells: should be 1 and this field specifies the chip select number
> +
> +Example:
> +-------
> +
> +       spics: sspgpio@2010088030 {
> +               compatible = "lsi,ssp-gpio";
> +               #gpio-cells = <1>;
> +               reg = <0x20 0x10088030 0x00 0x4>;
> +               gpio-controller;
> +       };
> +
> +       spi0: ssp@2010088000 {
> +               compatible = "arm,pl022", "arm,primecell";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0x20 0x10088000 0x00 0x1000>;
> +               num-cs = <5>;
> +               cs-gpios = <&spics 0>,
> +                          <&spics 1>,
> +                          <&spics 2>,
> +                          <&spics 3>,
> +                          <&spics 4>;
> +               ...
> +      };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt b/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
new file mode 100644
index 0000000..a64c695
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
@@ -0,0 +1,36 @@ 
+* Axxia SSP GPIO chip-select driver
+
+The Axxia device has a ARM PL022 Prime Cell SSP controller with an extension of
+five chip select signals that may be controlled by software. This driver
+exports them as GPIOs.
+
+Required properties:
+
+  * compatible: should be "lsi,ssp-gpio"
+  * reg: address of the chip select control register.
+  * gpio-controller: mark the device as gpio controller
+  * #gpio-cells: should be 1 and this field specifies the chip select number
+
+Example:
+-------
+
+	spics: sspgpio@2010088030 {
+		compatible = "lsi,ssp-gpio";
+		#gpio-cells = <1>;
+		reg = <0x20 0x10088030 0x00 0x4>;
+		gpio-controller;
+	};
+
+	spi0: ssp@2010088000 {
+		compatible = "arm,pl022", "arm,primecell";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x20 0x10088000 0x00 0x1000>;
+		num-cs = <5>;
+		cs-gpios = <&spics 0>,
+			   <&spics 1>,
+			   <&spics 2>,
+			   <&spics 3>,
+			   <&spics 4>;
+		...
+      };