diff mbox

[V2,16/20] pci: split up up pci_update mappings

Message ID 1258086596-3584-17-git-send-email-yamahata@valinux.co.jp
State New
Headers show

Commit Message

Isaku Yamahata Nov. 13, 2009, 4:29 a.m. UTC
From: Michael S. Tsirkin <mst@redhat.com>

Split bar address math into a separate function.
In particular, this gets rid of an ugly forward goto
into scope that we have there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
---
 hw/pci.c |  125 +++++++++++++++++++++++++++++++++----------------------------
 1 files changed, 68 insertions(+), 57 deletions(-)
diff mbox

Patch

diff --git a/hw/pci.c b/hw/pci.c
index bb3236c..24345b0 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -720,14 +720,77 @@  static void pci_bridge_filter(PCIDevice *d, pcibus_t *addr, pcibus_t *size,
     }
 }
 
+static pcibus_t pci_bar_address(PCIDevice *d,
+				int reg, uint8_t type, pcibus_t size)
+{
+    pcibus_t new_addr, last_addr;
+    int bar = pci_bar(d, reg);
+    uint16_t cmd = pci_get_word(d->config + PCI_COMMAND);
+
+    if (type & PCI_BASE_ADDRESS_SPACE_IO) {
+        if (!(cmd & PCI_COMMAND_IO)) {
+            return PCI_BAR_UNMAPPED;
+        }
+        new_addr = pci_get_long(d->config + bar) & ~(size - 1);
+        last_addr = new_addr + size - 1;
+        /* NOTE: we have only 64K ioports on PC */
+        if (last_addr <= new_addr || new_addr == 0 || last_addr > UINT16_MAX) {
+            return PCI_BAR_UNMAPPED;
+        }
+        return new_addr;
+    }
+
+    if (!(cmd & PCI_COMMAND_MEMORY)) {
+        return PCI_BAR_UNMAPPED;
+    }
+    if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+        new_addr = pci_get_quad(d->config + bar);
+    } else {
+        new_addr = pci_get_long(d->config + bar);
+    }
+    /* the ROM slot has a specific enable bit */
+    if (reg == PCI_ROM_SLOT && !(new_addr & PCI_ROM_ADDRESS_ENABLE)) {
+        return PCI_BAR_UNMAPPED;
+    }
+    new_addr &= ~(size - 1);
+    last_addr = new_addr + size - 1;
+    /* NOTE: we do not support wrapping */
+    /* XXX: as we cannot support really dynamic
+       mappings, we handle specific values as invalid
+       mappings. */
+    if (last_addr <= new_addr || new_addr == 0 ||
+        last_addr == PCI_BAR_UNMAPPED) {
+        return PCI_BAR_UNMAPPED;
+    }
+
+    /* Now pcibus_t is 64bit.
+     * Check if 32 bit BAR wraps around explicitly.
+     * Without this, PC ide doesn't work well.
+     * TODO: remove this work around.
+     */
+    if  (!(type & PCI_BASE_ADDRESS_MEM_TYPE_64) && last_addr >= UINT32_MAX) {
+        return PCI_BAR_UNMAPPED;
+    }
+
+    /*
+     * OS is allowed to set BAR beyond its addressable
+     * bits. For example, 32 bit OS can set 64bit bar
+     * to >4G. Check it. TODO: we might need to support
+     * it in the future for e.g. PAE.
+     */
+    if (last_addr >= TARGET_PHYS_ADDR_MAX) {
+        return PCI_BAR_UNMAPPED;
+    }
+
+    return new_addr;
+}
+
 static void pci_update_mappings(PCIDevice *d)
 {
     PCIIORegion *r;
-    int cmd, i;
-    pcibus_t last_addr, new_addr;
-    pcibus_t filtered_size;
+    int i;
+    pcibus_t new_addr, filtered_size;
 
-    cmd = pci_get_word(d->config + PCI_COMMAND);
     for(i = 0; i < PCI_NUM_REGIONS; i++) {
         r = &d->io_regions[i];
 
@@ -735,59 +798,7 @@  static void pci_update_mappings(PCIDevice *d)
         if (!r->size)
             continue;
 
-        if (r->type & PCI_BASE_ADDRESS_SPACE_IO) {
-            if (cmd & PCI_COMMAND_IO) {
-                new_addr = pci_get_long(d->config + pci_bar(d, i));
-                new_addr = new_addr & ~(r->size - 1);
-                last_addr = new_addr + r->size - 1;
-                /* NOTE: we have only 64K ioports on PC */
-                if (last_addr <= new_addr || new_addr == 0 ||
-                    last_addr >= 0x10000) {
-                    new_addr = PCI_BAR_UNMAPPED;
-                }
-            } else {
-                new_addr = PCI_BAR_UNMAPPED;
-            }
-        } else {
-            if (cmd & PCI_COMMAND_MEMORY) {
-                if (r->type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-                    new_addr = pci_get_quad(d->config + pci_bar(d, i));
-                } else {
-                    new_addr = pci_get_long(d->config + pci_bar(d, i));
-                }
-                /* the ROM slot has a specific enable bit */
-                if (i == PCI_ROM_SLOT && !(new_addr & PCI_ROM_ADDRESS_ENABLE))
-                    goto no_mem_map;
-                new_addr = new_addr & ~(r->size - 1);
-                last_addr = new_addr + r->size - 1;
-                /* NOTE: we do not support wrapping */
-                /* XXX: as we cannot support really dynamic
-                   mappings, we handle specific values as invalid
-                   mappings. */
-                if (last_addr <= new_addr || new_addr == 0 ||
-                    last_addr == PCI_BAR_UNMAPPED ||
-
-                    /* Now pcibus_t is 64bit.
-                     * Check if 32 bit BAR wrap around explicitly.
-                     * Without this, PC ide doesn't work well.
-                     * TODO: remove this work around.
-                     */
-                    (!(r->type & PCI_BASE_ADDRESS_MEM_TYPE_64) &&
-                     last_addr >= UINT32_MAX) ||
-
-                    /*
-                     * OS is allowed to set BAR beyond its addressable
-                     * bits. For example, 32 bit OS can set 64bit bar
-                     * to >4G. Check it.
-                     */
-                    last_addr >= TARGET_PHYS_ADDR_MAX) {
-                    new_addr = PCI_BAR_UNMAPPED;
-                }
-            } else {
-            no_mem_map:
-                new_addr = PCI_BAR_UNMAPPED;
-            }
-        }
+        new_addr = pci_bar_address(d, i, r->type, r->size);
 
         /* bridge filtering */
         filtered_size = r->size;