Message ID | 1408973962-23883-1-git-send-email-zyw@rock-chips.com |
---|---|
State | Superseded |
Headers | show |
Chris, On Mon, Aug 25, 2014 at 6:39 AM, Chris Zhong <zyw@rock-chips.com> wrote: > Signed-off-by: Chris Zhong <zyw@rock-chips.com> > > --- > > Changes in v5: > Advices by Mark Brown > - add description about regulator valid name. > - add a header file "rockchip,rk808". > > Changes in v4: > Advices by Doug > - add a "#clock-cells" propertiy > - update the example > > Changes in v3: None > Changes in v2: None > > drivers/clk/Kconfig | 9 +++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-rk808.c | 164 +++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 174 insertions(+) > create mode 100644 drivers/clk/clk-rk808.c > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index cfd3af7..84e0590 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686 > ---help--- > This driver supports Maxim 77686 crystal oscillator clock. > > +config COMMON_CLK_RK808 > + tristate "Clock driver for RK808" > + depends on MFD_RK808 > + ---help--- > + This driver supports RK808 crystal oscillator clock. These > + multi-function devices have two fixed-rate oscillators, > + clocked at 32KHz each. Clkout1 is always on, Clkout2 can off > + by control register. > + > config COMMON_CLK_SI5351 > tristate "Clock driver for SiLabs 5351A/B/C" > depends on I2C > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index f537a0b..99f53d5 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o > obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o > obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o > obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o > +obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o > obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o > obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o > obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o > diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c > new file mode 100644 > index 0000000..a8f8d81 > --- /dev/null > +++ b/drivers/clk/clk-rk808.c > @@ -0,0 +1,164 @@ > +/* > + * Clkout driver for Rockchip RK808 > + * > + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd > + * > + * Author: Chris Zhong <zyw@rock-chips.com> > + * Author: Zhang Qing <zhangqing@rock-chips.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + */ > + > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/platform_device.h> > +#include <linux/mfd/rk808.h> > +#include <linux/i2c.h> > + > +struct rk808_clkout { > + struct rk808 *rk808; > + struct clk_onecell_data clk_data; > + struct clk_hw clkout1_hw; > + struct clk_hw clkout2_hw; > +}; > + > +static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + return 32768; > +} > + > +static int rk808_clkout1_is_prepared(struct clk_hw *hw) > +{ > + return 1; > +} > + > +static int rk808_clkout2_control(struct clk_hw *hw, bool enable) > +{ > + struct rk808_clkout *rk808_clkout = container_of(hw, > + struct rk808_clkout, > + clkout2_hw); > + struct rk808 *rk808 = rk808_clkout->rk808; > + > + return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG, > + CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0); > +} > + > +static int rk808_clkout2_prepare(struct clk_hw *hw) > +{ > + return rk808_clkout2_control(hw, 1); > +} > + > +static void rk808_clkout2_unprepare(struct clk_hw *hw) > +{ > + rk808_clkout2_control(hw, 0); > +} > + > +static int rk808_clkout2_is_prepared(struct clk_hw *hw) > +{ > + struct rk808_clkout *rk808_clkout = container_of(hw, > + struct rk808_clkout, > + clkout2_hw); > + struct rk808 *rk808 = rk808_clkout->rk808; > + uint32_t val; > + > + int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val); > + > + if (ret < 0) > + return ret; > + > + return (val & CLK32KOUT2_EN) ? 1 : 0; > +} > + > +static const struct clk_ops rk808_clkout1_ops = { > + .is_prepared = rk808_clkout1_is_prepared, > + .recalc_rate = rk808_clkout_recalc_rate, > +}; > + > +static const struct clk_ops rk808_clkout2_ops = { > + .prepare = rk808_clkout2_prepare, > + .unprepare = rk808_clkout2_unprepare, > + .is_prepared = rk808_clkout2_is_prepared, > + .recalc_rate = rk808_clkout_recalc_rate, > +}; > + > +static int rk808_clkout_probe(struct platform_device *pdev) > +{ > + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); > + struct i2c_client *client = rk808->i2c; > + struct device_node *node = client->dev.of_node; > + struct clk_init_data init = {}; > + struct clk **clk_table; > + struct rk808_clkout *rk808_clkout; > + > + rk808_clkout = devm_kzalloc(&client->dev, > + sizeof(*rk808_clkout), GFP_KERNEL); > + if (!rk808_clkout) > + return -ENOMEM; > + > + rk808_clkout->rk808 = rk808; > + > + clk_table = devm_kzalloc(&client->dev, > + 2*sizeof(struct clk *), GFP_KERNEL); > + if (!clk_table) > + return -ENOMEM; > + > + init.flags = CLK_IS_ROOT; > + init.parent_names = NULL; > + init.num_parents = 0; > + init.name = "rk808-clkout1"; > + init.ops = &rk808_clkout1_ops; > + rk808_clkout->clkout1_hw.init = &init; > + > + /* optional override of the clockname */ > + of_property_read_string_index(node, "clock-output-names", > + 0, &init.name); > + > + clk_table[0] = devm_clk_register(&client->dev, > + &rk808_clkout->clkout1_hw); > + if (IS_ERR(clk_table[0])) > + return PTR_ERR(clk_table[0]); > + > + init.name = "rk808-clkout2"; > + init.ops = &rk808_clkout2_ops; > + rk808_clkout->clkout2_hw.init = &init; > + > + /* optional override of the clockname */ > + of_property_read_string_index(node, "clock-output-names", > + 1, &init.name); > + > + clk_table[1] = devm_clk_register(&client->dev, > + &rk808_clkout->clkout2_hw); > + if (IS_ERR(clk_table[1])) > + return PTR_ERR(clk_table[1]); > + > + rk808_clkout->clk_data.clks = clk_table; > + rk808_clkout->clk_data.clk_num = 2; > + > + return of_clk_add_provider(node, of_clk_src_onecell_get, clk_table); I'm about 99.9% certain that the above line should be: return of_clk_add_provider(node, of_clk_src_onecell_get, &rk808_clkout->clk_data); The data for of_clk_src_onecell_get() should be of type "struct clk_onecell_data *". Otherwise this looks good to me and you can add my Reviewed-by tag (and even my Tested-by tag). -Doug
On 08/26/2014 01:59 AM, Doug Anderson wrote: > Chris, > > On Mon, Aug 25, 2014 at 6:39 AM, Chris Zhong <zyw@rock-chips.com> wrote: >> Signed-off-by: Chris Zhong <zyw@rock-chips.com> >> >> --- >> >> Changes in v5: >> Advices by Mark Brown >> - add description about regulator valid name. >> - add a header file "rockchip,rk808". >> >> Changes in v4: >> Advices by Doug >> - add a "#clock-cells" propertiy >> - update the example >> >> Changes in v3: None >> Changes in v2: None >> >> drivers/clk/Kconfig | 9 +++ >> drivers/clk/Makefile | 1 + >> drivers/clk/clk-rk808.c | 164 +++++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 174 insertions(+) >> create mode 100644 drivers/clk/clk-rk808.c >> >> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig >> index cfd3af7..84e0590 100644 >> --- a/drivers/clk/Kconfig >> +++ b/drivers/clk/Kconfig >> @@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686 >> ---help--- >> This driver supports Maxim 77686 crystal oscillator clock. >> >> +config COMMON_CLK_RK808 >> + tristate "Clock driver for RK808" >> + depends on MFD_RK808 >> + ---help--- >> + This driver supports RK808 crystal oscillator clock. These >> + multi-function devices have two fixed-rate oscillators, >> + clocked at 32KHz each. Clkout1 is always on, Clkout2 can off >> + by control register. >> + >> config COMMON_CLK_SI5351 >> tristate "Clock driver for SiLabs 5351A/B/C" >> depends on I2C >> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile >> index f537a0b..99f53d5 100644 >> --- a/drivers/clk/Makefile >> +++ b/drivers/clk/Makefile >> @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o >> obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o >> obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o >> obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o >> +obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o >> obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o >> obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o >> obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o >> diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c >> new file mode 100644 >> index 0000000..a8f8d81 >> --- /dev/null >> +++ b/drivers/clk/clk-rk808.c >> @@ -0,0 +1,164 @@ >> +/* >> + * Clkout driver for Rockchip RK808 >> + * >> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd >> + * >> + * Author: Chris Zhong <zyw@rock-chips.com> >> + * Author: Zhang Qing <zhangqing@rock-chips.com> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/clk-provider.h> >> +#include <linux/module.h> >> +#include <linux/slab.h> >> +#include <linux/platform_device.h> >> +#include <linux/mfd/rk808.h> >> +#include <linux/i2c.h> >> + >> +struct rk808_clkout { >> + struct rk808 *rk808; >> + struct clk_onecell_data clk_data; >> + struct clk_hw clkout1_hw; >> + struct clk_hw clkout2_hw; >> +}; >> + >> +static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + return 32768; >> +} >> + >> +static int rk808_clkout1_is_prepared(struct clk_hw *hw) >> +{ >> + return 1; >> +} >> + >> +static int rk808_clkout2_control(struct clk_hw *hw, bool enable) >> +{ >> + struct rk808_clkout *rk808_clkout = container_of(hw, >> + struct rk808_clkout, >> + clkout2_hw); >> + struct rk808 *rk808 = rk808_clkout->rk808; >> + >> + return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG, >> + CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0); >> +} >> + >> +static int rk808_clkout2_prepare(struct clk_hw *hw) >> +{ >> + return rk808_clkout2_control(hw, 1); >> +} >> + >> +static void rk808_clkout2_unprepare(struct clk_hw *hw) >> +{ >> + rk808_clkout2_control(hw, 0); >> +} >> + >> +static int rk808_clkout2_is_prepared(struct clk_hw *hw) >> +{ >> + struct rk808_clkout *rk808_clkout = container_of(hw, >> + struct rk808_clkout, >> + clkout2_hw); >> + struct rk808 *rk808 = rk808_clkout->rk808; >> + uint32_t val; >> + >> + int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val); >> + >> + if (ret < 0) >> + return ret; >> + >> + return (val & CLK32KOUT2_EN) ? 1 : 0; >> +} >> + >> +static const struct clk_ops rk808_clkout1_ops = { >> + .is_prepared = rk808_clkout1_is_prepared, >> + .recalc_rate = rk808_clkout_recalc_rate, >> +}; >> + >> +static const struct clk_ops rk808_clkout2_ops = { >> + .prepare = rk808_clkout2_prepare, >> + .unprepare = rk808_clkout2_unprepare, >> + .is_prepared = rk808_clkout2_is_prepared, >> + .recalc_rate = rk808_clkout_recalc_rate, >> +}; >> + >> +static int rk808_clkout_probe(struct platform_device *pdev) >> +{ >> + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); >> + struct i2c_client *client = rk808->i2c; >> + struct device_node *node = client->dev.of_node; >> + struct clk_init_data init = {}; >> + struct clk **clk_table; >> + struct rk808_clkout *rk808_clkout; >> + >> + rk808_clkout = devm_kzalloc(&client->dev, >> + sizeof(*rk808_clkout), GFP_KERNEL); >> + if (!rk808_clkout) >> + return -ENOMEM; >> + >> + rk808_clkout->rk808 = rk808; >> + >> + clk_table = devm_kzalloc(&client->dev, >> + 2*sizeof(struct clk *), GFP_KERNEL); >> + if (!clk_table) >> + return -ENOMEM; >> + >> + init.flags = CLK_IS_ROOT; >> + init.parent_names = NULL; >> + init.num_parents = 0; >> + init.name = "rk808-clkout1"; >> + init.ops = &rk808_clkout1_ops; >> + rk808_clkout->clkout1_hw.init = &init; >> + >> + /* optional override of the clockname */ >> + of_property_read_string_index(node, "clock-output-names", >> + 0, &init.name); >> + >> + clk_table[0] = devm_clk_register(&client->dev, >> + &rk808_clkout->clkout1_hw); >> + if (IS_ERR(clk_table[0])) >> + return PTR_ERR(clk_table[0]); >> + >> + init.name = "rk808-clkout2"; >> + init.ops = &rk808_clkout2_ops; >> + rk808_clkout->clkout2_hw.init = &init; >> + >> + /* optional override of the clockname */ >> + of_property_read_string_index(node, "clock-output-names", >> + 1, &init.name); >> + >> + clk_table[1] = devm_clk_register(&client->dev, >> + &rk808_clkout->clkout2_hw); >> + if (IS_ERR(clk_table[1])) >> + return PTR_ERR(clk_table[1]); >> + >> + rk808_clkout->clk_data.clks = clk_table; >> + rk808_clkout->clk_data.clk_num = 2; >> + >> + return of_clk_add_provider(node, of_clk_src_onecell_get, clk_table); > I'm about 99.9% certain that the above line should be: > > return of_clk_add_provider(node, of_clk_src_onecell_get, > &rk808_clkout->clk_data); > > The data for of_clk_src_onecell_get() should be of type "struct > clk_onecell_data *". > > > Otherwise this looks good to me and you can add my Reviewed-by tag > (and even my Tested-by tag). > > -Doug Yes, It should be, TKS. I will modify it in v6 > > >
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index cfd3af7..84e0590 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_RK808 + tristate "Clock driver for RK808" + depends on MFD_RK808 + ---help--- + This driver supports RK808 crystal oscillator clock. These + multi-function devices have two fixed-rate oscillators, + clocked at 32KHz each. Clkout1 is always on, Clkout2 can off + by control register. + config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f537a0b..99f53d5 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o +obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c new file mode 100644 index 0000000..a8f8d81 --- /dev/null +++ b/drivers/clk/clk-rk808.c @@ -0,0 +1,164 @@ +/* + * Clkout driver for Rockchip RK808 + * + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * + * Author: Chris Zhong <zyw@rock-chips.com> + * Author: Zhang Qing <zhangqing@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/mfd/rk808.h> +#include <linux/i2c.h> + +struct rk808_clkout { + struct rk808 *rk808; + struct clk_onecell_data clk_data; + struct clk_hw clkout1_hw; + struct clk_hw clkout2_hw; +}; + +static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 32768; +} + +static int rk808_clkout1_is_prepared(struct clk_hw *hw) +{ + return 1; +} + +static int rk808_clkout2_control(struct clk_hw *hw, bool enable) +{ + struct rk808_clkout *rk808_clkout = container_of(hw, + struct rk808_clkout, + clkout2_hw); + struct rk808 *rk808 = rk808_clkout->rk808; + + return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG, + CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0); +} + +static int rk808_clkout2_prepare(struct clk_hw *hw) +{ + return rk808_clkout2_control(hw, 1); +} + +static void rk808_clkout2_unprepare(struct clk_hw *hw) +{ + rk808_clkout2_control(hw, 0); +} + +static int rk808_clkout2_is_prepared(struct clk_hw *hw) +{ + struct rk808_clkout *rk808_clkout = container_of(hw, + struct rk808_clkout, + clkout2_hw); + struct rk808 *rk808 = rk808_clkout->rk808; + uint32_t val; + + int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val); + + if (ret < 0) + return ret; + + return (val & CLK32KOUT2_EN) ? 1 : 0; +} + +static const struct clk_ops rk808_clkout1_ops = { + .is_prepared = rk808_clkout1_is_prepared, + .recalc_rate = rk808_clkout_recalc_rate, +}; + +static const struct clk_ops rk808_clkout2_ops = { + .prepare = rk808_clkout2_prepare, + .unprepare = rk808_clkout2_unprepare, + .is_prepared = rk808_clkout2_is_prepared, + .recalc_rate = rk808_clkout_recalc_rate, +}; + +static int rk808_clkout_probe(struct platform_device *pdev) +{ + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); + struct i2c_client *client = rk808->i2c; + struct device_node *node = client->dev.of_node; + struct clk_init_data init = {}; + struct clk **clk_table; + struct rk808_clkout *rk808_clkout; + + rk808_clkout = devm_kzalloc(&client->dev, + sizeof(*rk808_clkout), GFP_KERNEL); + if (!rk808_clkout) + return -ENOMEM; + + rk808_clkout->rk808 = rk808; + + clk_table = devm_kzalloc(&client->dev, + 2*sizeof(struct clk *), GFP_KERNEL); + if (!clk_table) + return -ENOMEM; + + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + init.name = "rk808-clkout1"; + init.ops = &rk808_clkout1_ops; + rk808_clkout->clkout1_hw.init = &init; + + /* optional override of the clockname */ + of_property_read_string_index(node, "clock-output-names", + 0, &init.name); + + clk_table[0] = devm_clk_register(&client->dev, + &rk808_clkout->clkout1_hw); + if (IS_ERR(clk_table[0])) + return PTR_ERR(clk_table[0]); + + init.name = "rk808-clkout2"; + init.ops = &rk808_clkout2_ops; + rk808_clkout->clkout2_hw.init = &init; + + /* optional override of the clockname */ + of_property_read_string_index(node, "clock-output-names", + 1, &init.name); + + clk_table[1] = devm_clk_register(&client->dev, + &rk808_clkout->clkout2_hw); + if (IS_ERR(clk_table[1])) + return PTR_ERR(clk_table[1]); + + rk808_clkout->clk_data.clks = clk_table; + rk808_clkout->clk_data.clk_num = 2; + + return of_clk_add_provider(node, of_clk_src_onecell_get, clk_table); +} + +static struct platform_driver rk808_clkout_driver = { + .probe = rk808_clkout_probe, + .driver = { + .name = "rk808-clkout", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(rk808_clkout_driver); + +MODULE_DESCRIPTION("Clkout driver for the rk808 series PMICs"); +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); +MODULE_AUTHOR("Zhang Qing <zhanqging@rock-chips.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rk808-clkout");
Signed-off-by: Chris Zhong <zyw@rock-chips.com> --- Changes in v5: Advices by Mark Brown - add description about regulator valid name. - add a header file "rockchip,rk808". Changes in v4: Advices by Doug - add a "#clock-cells" propertiy - update the example Changes in v3: None Changes in v2: None drivers/clk/Kconfig | 9 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-rk808.c | 164 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+) create mode 100644 drivers/clk/clk-rk808.c