@@ -376,38 +376,42 @@ _DoubleExceptionVector_WindowOverflow:
beqz a2, 1f # if at start of vector, don't restore
addi a0, a0, -128
- bbsi a0, 8, 1f # don't restore except for overflow 8 and 12
- bbsi a0, 7, 2f
+ bbsi.l a0, 8, 1f # don't restore except for overflow 8 and 12
+
+ /*
+ * This fixup handler is for the extremely unlikely case where the
+ * overflow handler's reference thru a0 gets a hardware TLB refill
+ * that bumps out the (distinct, aliasing) TLB entry that mapped its
+ * prior references thru a9/a13, and where our reference now thru
+ * a9/a13 gets a 2nd-level miss exception (not hardware TLB refill).
+ */
+ movi a2, window_overflow_restore_a0_fixup
+ s32i a2, a3, EXC_TABLE_FIXUP
+ l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ xsr a3, excsave1
+
+ bbsi.l a0, 7, 2f
/*
* Restore a0 as saved by _WindowOverflow8().
- *
- * FIXME: we really need a fixup handler for this L32E,
- * for the extremely unlikely case where the overflow handler's
- * reference thru a0 gets a hardware TLB refill that bumps out
- * the (distinct, aliasing) TLB entry that mapped its prior
- * references thru a9, and where our reference now thru a9
- * gets a 2nd-level miss exception (not hardware TLB refill).
*/
- l32e a2, a9, -16
- wsr a2, depc # replace the saved a0
- j 1f
+ l32e a0, a9, -16
+ wsr a0, depc # replace the saved a0
+ j 3f
2:
/*
* Restore a0 as saved by _WindowOverflow12().
- *
- * FIXME: we really need a fixup handler for this L32E,
- * for the extremely unlikely case where the overflow handler's
- * reference thru a0 gets a hardware TLB refill that bumps out
- * the (distinct, aliasing) TLB entry that mapped its prior
- * references thru a13, and where our reference now thru a13
- * gets a 2nd-level miss exception (not hardware TLB refill).
*/
- l32e a2, a13, -16
- wsr a2, depc # replace the saved a0
+ l32e a0, a13, -16
+ wsr a0, depc # replace the saved a0
+3:
+ xsr a3, excsave1
+ movi a0, 0
+ s32i a0, a3, EXC_TABLE_FIXUP
+ s32i a2, a3, EXC_TABLE_DOUBLE_SAVE
1:
/*
* Restore WindowBase while leaving all address registers restored.
@@ -449,6 +453,7 @@ _DoubleExceptionVector_WindowOverflow:
s32i a0, a2, PT_DEPC
+_DoubleExceptionVector_handle_exception:
addx4 a0, a0, a3
l32i a0, a0, EXC_TABLE_FAST_USER
xsr a3, excsave1
@@ -464,11 +469,120 @@ _DoubleExceptionVector_WindowOverflow:
rotw -3
j 1b
- .end literal_prefix
ENDPROC(_DoubleExceptionVector)
/*
+ * Fixup handler for TLB miss in double exception handler for window owerflow.
+ * We get here with windowbase set to the window that was being spilled and
+ * a0 trashed. a0 bit 7 determines if this is a call8 (bit clear) or call12
+ * (bit set) window.
+ *
+ * We do the following here:
+ * - go to the original window retaining a0 value;
+ * - set up exception stack to return back to appropriate a0 restore code
+ * (we'll need to rotate window back and there's no place to save this
+ * information, use different return address for that);
+ * - handle the exception;
+ * - go to the window that was being spilled;
+ * - set up window_overflow_restore_a0_fixup as a fixup routine;
+ * - reload a0;
+ * - restore the original window;
+ * - reset the default fixup routine;
+ * - return to user. By the time we get to this fixup handler all information
+ * about the conditions of the original double exception that happened in
+ * the window overflow handler is lost, so we just return to userspace to
+ * retry overflow from start.
+ *
+ * a0: value of depc, original value in depc
+ * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
+ * a3: exctable, original value in excsave1
+ */
+
+ENTRY(window_overflow_restore_a0_fixup)
+
+ rsr a0, ps
+ extui a0, a0, PS_OWB_SHIFT, PS_OWB_WIDTH
+ rsr a2, windowbase
+ sub a0, a2, a0
+ extui a0, a0, 0, 3
+ l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ xsr a3, excsave1
+
+ _beqi a0, 1, .Lhandle_1
+ _beqi a0, 3, .Lhandle_3
+
+ .macro overflow_fixup_handle_exception_pane n
+
+ rsr a0, depc
+ rotw -\n
+
+ xsr a3, excsave1
+ wsr a2, depc
+ l32i a2, a3, EXC_TABLE_KSTK
+ s32i a0, a2, PT_AREG0
+
+ movi a0, .Lrestore_\n
+ s32i a0, a2, PT_DEPC
+ rsr a0, exccause
+ j _DoubleExceptionVector_handle_exception
+
+ .endm
+
+ overflow_fixup_handle_exception_pane 2
+.Lhandle_1:
+ overflow_fixup_handle_exception_pane 1
+.Lhandle_3:
+ overflow_fixup_handle_exception_pane 3
+
+ .macro overflow_fixup_restore_a0_pane n
+
+ rotw \n
+ /* Need to preserve a0 value here to be able to handle exception
+ * that may occur on a0 reload from stack. It may occur because
+ * TLB miss handler may not be atomic and pointer to page table
+ * may be lost before we get here. There are no free registers,
+ * so we need to use EXC_TABLE_DOUBLE_SAVE area.
+ */
+ xsr a3, excsave1
+ s32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ movi a2, window_overflow_restore_a0_fixup
+ s32i a2, a3, EXC_TABLE_FIXUP
+ l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ xsr a3, excsave1
+ bbsi.l a0, 7, 1f
+ l32e a0, a9, -16
+ j 2f
+1:
+ l32e a0, a13, -16
+2:
+ rotw -\n
+
+ .endm
+
+.Lrestore_2:
+ overflow_fixup_restore_a0_pane 2
+
+.Lset_default_fixup:
+ xsr a3, excsave1
+ s32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ movi a2, 0
+ s32i a2, a3, EXC_TABLE_FIXUP
+ l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ xsr a3, excsave1
+ rfe
+
+.Lrestore_1:
+ overflow_fixup_restore_a0_pane 1
+ j .Lset_default_fixup
+.Lrestore_3:
+ overflow_fixup_restore_a0_pane 3
+ j .Lset_default_fixup
+
+ENDPROC(window_overflow_restore_a0_fixup)
+
+ .end literal_prefix
+/*
* Debug interrupt vector
*
* There is not much space here, so simply jump to another handler.
@@ -262,13 +262,13 @@ SECTIONS
.UserExceptionVector.literal)
SECTION_VECTOR (_DoubleExceptionVector_literal,
.DoubleExceptionVector.literal,
- DOUBLEEXC_VECTOR_VADDR - 16,
+ DOUBLEEXC_VECTOR_VADDR - 40,
SIZEOF(.UserExceptionVector.text),
.UserExceptionVector.text)
SECTION_VECTOR (_DoubleExceptionVector_text,
.DoubleExceptionVector.text,
DOUBLEEXC_VECTOR_VADDR,
- 32,
+ 40,
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
This is a note to let you know that I have just added a patch titled xtensa: add fixup for double exception raised in window overflow to the linux-3.13.y-queue branch of the 3.13.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.13.y-queue This patch is scheduled to be released in version 3.13.11.6. If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.13.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Kamal ------ From ca839666a0dd2601e35a00c33352ab73aa4c71c5 Mon Sep 17 00:00:00 2001 From: Max Filippov <jcmvbkbc@gmail.com> Date: Sat, 24 May 2014 21:48:28 +0400 Subject: xtensa: add fixup for double exception raised in window overflow commit 17290231df16eeee5dfc198dbf5ee4b419996dcd upstream. There are two FIXMEs in the double exception handler 'for the extremely unlikely case'. This case gets hit by gcc during kernel build once in a few hours, resulting in an unrecoverable exception condition. Provide missing fixup routine to handle this case. Double exception literals now need 8 more bytes, add them to the linker script. Also replace bbsi instructions with bbsi.l as we're branching depending on 8th and 7th LSB-based bits of exception address. This may be tested by adding the explicit DTLB invalidation to window overflow handlers, like the following: --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4) ENTRY_ALIGN64(_WindowOverflow8) s32e a0, a9, -16 + bbsi.l a9, 31, 1f + rsr a0, ccount + bbsi.l a0, 4, 1f + pdtlb a0, a9 + idtlb a0 + movi a0, 9 + idtlb a0 +1: l32e a0, a1, -12 s32e a2, a9, -8 s32e a1, a9, -12 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> --- arch/xtensa/kernel/vectors.S | 158 +++++++++++++++++++++++++++++++++------ arch/xtensa/kernel/vmlinux.lds.S | 4 +- 2 files changed, 138 insertions(+), 24 deletions(-) -- 1.9.1