[3/3] ARM: dts: omap3430-sdp: Revert to using software ECC for NAND

Submitted by Roger Quadros on Aug. 5, 2014, 10:11 a.m.

Details

Message ID 1407233482-11642-4-git-send-email-rogerq@ti.com
State Accepted
Commit d5c1eb17ba052966debc4d9d103fc15740b541fa
Headers show

Commit Message

Roger Quadros Aug. 5, 2014, 10:11 a.m.
For v3.14 and prior, 1-bit Hamming code ECC via software was used
for NAND on this board.
Commit c06c52701695 in v3.15 changed the behaviour
to use 1-bit Hamming code via Hardware using a different ECC layout
i.e. (ROM code layout) than what is used by software ECC.

This ECC layout change causes NAND filesystems created in v3.14
and prior to be unusable in v3.15 and later. So revert back to
using software ECC scheme.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Patch hide | download patch | download mbox

diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 02f69f4..9bad94e 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -107,7 +107,7 @@ 
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1 0 0x08000000>;
-		ti,nand-ecc-opt = "ham1";
+		ti,nand-ecc-opt = "sw";
 		nand-bus-width = <8>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <36>;