diff mbox

[v3,1/2] rcar_can: document device tree bindings

Message ID 201408010124.26505.sergei.shtylyov@cogentembedded.com
State Awaiting Upstream, archived
Delegated to: David Miller
Headers show

Commit Message

Sergei Shtylyov July 31, 2014, 9:24 p.m. UTC
Document the R-Car CAN device tree bindings.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
The patch is against the 'linux-can-next.git' repo.

Changes in version 2:
- new patch, split from the driver's device tree support patch;
- adjusted "clocks" property to refer to 3 clocks instead of 1;
- added mandatory "clock-names" property;
- renamed the "clock-select" property to "renesas,can-clock-select".

 Documentation/devicetree/bindings/net/can/rcar_can.txt |   43 +++++++++++++++++
 1 file changed, 43 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Marc Kleine-Budde July 31, 2014, 9:31 p.m. UTC | #1
On 07/31/2014 11:24 PM, Sergei Shtylyov wrote:
> Document the R-Car CAN device tree bindings.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

The series looks good from the CAN perpective. I'll apply the patches
after we've got an Acked-by from the DT folks.

Marc

> 
> ---
> The patch is against the 'linux-can-next.git' repo.
> 
> Changes in version 2:
> - new patch, split from the driver's device tree support patch;
> - adjusted "clocks" property to refer to 3 clocks instead of 1;
> - added mandatory "clock-names" property;
> - renamed the "clock-select" property to "renesas,can-clock-select".
> 
>  Documentation/devicetree/bindings/net/can/rcar_can.txt |   43 +++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> Index: linux-can-next/Documentation/devicetree/bindings/net/can/rcar_can.txt
> ===================================================================
> --- /dev/null
> +++ linux-can-next/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -0,0 +1,43 @@
> +Renesas R-Car CAN controller Device Tree Bindings
> +-------------------------------------------------
> +
> +Required properties:
> +- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> +	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> +	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> +	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
> +- reg: physical base address and size of the R-Car CAN register map.
> +- interrupts: interrupt specifier for the sole interrupt.
> +- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> +- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> +- pinctrl-0: pin control group to be used for this controller.
> +- pinctrl-names: must be "default".
> +
> +Optional properties:
> +- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> +			    <0x0> (default) : Peripheral clock (clkp1)
> +			    <0x1> : Peripheral clock (clkp2)
> +			    <0x3> : Externally input clock
> +
> +Example
> +-------
> +
> +SoC common .dtsi file:
> +
> +	can0: can@e6e80000 {
> +		compatible = "renesas,can-r8a7791";
> +		reg = <0 0xe6e80000 0 0x1000>;
> +		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
> +		       	 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
> +		clock-names = "clkp1", "clkp2", "can_clk";
> +		status = "disabled";
> +	};
> +
> +Board specific .dts file:
> +
> +&can0 {
> +	pinctrl-0 = <&can0_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
>
Sergei Shtylyov Aug. 4, 2014, 5:20 p.m. UTC | #2
Hello.

On 08/01/2014 01:31 AM, Marc Kleine-Budde wrote:

>> Document the R-Car CAN device tree bindings.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

> The series looks good from the CAN perpective. I'll apply the patches
> after we've got an Acked-by from the DT folks.

    How about the prior CAN clock support patch?

> Marc

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Marc Kleine-Budde Aug. 5, 2014, 6:15 a.m. UTC | #3
On 08/04/2014 07:20 PM, Sergei Shtylyov wrote:
> Hello.
> 
> On 08/01/2014 01:31 AM, Marc Kleine-Budde wrote:
> 
>>> Document the R-Car CAN device tree bindings.
> 
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
>> The series looks good from the CAN perpective. I'll apply the patches
>> after we've got an Acked-by from the DT folks.
> 
>    How about the prior CAN clock support patch?

That looks good, too.

Marc
Marc Kleine-Budde Aug. 14, 2014, 10:07 a.m. UTC | #4
On 07/31/2014 11:31 PM, Marc Kleine-Budde wrote:
> On 07/31/2014 11:24 PM, Sergei Shtylyov wrote:
>> Document the R-Car CAN device tree bindings.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> The series looks good from the CAN perpective. I'll apply the patches
> after we've got an Acked-by from the DT folks.

Applied both to linux-can-next.

Marc
diff mbox

Patch

Index: linux-can-next/Documentation/devicetree/bindings/net/can/rcar_can.txt
===================================================================
--- /dev/null
+++ linux-can-next/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -0,0 +1,43 @@ 
+Renesas R-Car CAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
+	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
+	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
+	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+- reg: physical base address and size of the R-Car CAN register map.
+- interrupts: interrupt specifier for the sole interrupt.
+- clocks: phandles and clock specifiers for 3 CAN clock inputs.
+- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must be "default".
+
+Optional properties:
+- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
+			    <0x0> (default) : Peripheral clock (clkp1)
+			    <0x1> : Peripheral clock (clkp2)
+			    <0x3> : Externally input clock
+
+Example
+-------
+
+SoC common .dtsi file:
+
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+		       	 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+Board specific .dts file:
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};