ARM: i.MX: Remove mach-cpuimx27sd board file

eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/configs/imx_v4_v5_defconfig         |   3 -
 arch/arm/mach-imx/Kconfig                    |  50 ----
 arch/arm/mach-imx/Makefile                   |   2 -
 arch/arm/mach-imx/eukrea-baseboards.h        |  10 +-
 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 351 ---------------------------
 arch/arm/mach-imx/mach-cpuimx27.c            | 321 ------------------------
 6 files changed, 1 insertion(+), 736 deletions(-)
 delete mode 100644 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
 delete mode 100644 arch/arm/mach-imx/mach-cpuimx27.c

Le Sat, 26 Jul 2014 17:41:08 +0400,
Alexander Shiyan <shc_work@mail.ru> a écrit :

> 
> eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
> devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
> imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Eric Bénard <eric@eukrea.com>

Thanks !

> ---
>  arch/arm/configs/imx_v4_v5_defconfig         |   3 -
>  arch/arm/mach-imx/Kconfig                    |  50 ----
>  arch/arm/mach-imx/Makefile                   |   2 -
>  arch/arm/mach-imx/eukrea-baseboards.h        |  10 +-
>  arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 351 ---------------------------
>  arch/arm/mach-imx/mach-cpuimx27.c            | 321 ------------------------
>  6 files changed, 1 insertion(+), 736 deletions(-)
>  delete mode 100644 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
>  delete mode 100644 arch/arm/mach-imx/mach-cpuimx27.c
> 
> diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
> index 63bde0e..f53074c 100644
> --- a/arch/arm/configs/imx_v4_v5_defconfig
> +++ b/arch/arm/configs/imx_v4_v5_defconfig
> @@ -31,9 +31,6 @@ CONFIG_MACH_EUKREA_CPUIMX25SD=y
>  CONFIG_MACH_IMX25_DT=y
>  CONFIG_MACH_MX27ADS=y
>  CONFIG_MACH_PCM038=y
> -CONFIG_MACH_CPUIMX27=y
> -CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
> -CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
>  CONFIG_MACH_MX27_3DS=y
>  CONFIG_MACH_IMX27_VISSTRIM_M10=y
>  CONFIG_MACH_PCA100=y
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index c6810b8..901e9ab 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -263,56 +263,6 @@ config MACH_PCM970_BASEBOARD
>  
>  endchoice
>  
> -config MACH_CPUIMX27
> -	bool "Eukrea CPUIMX27 module"
> -	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
> -	select IMX_HAVE_PLATFORM_IMX2_WDT
> -	select IMX_HAVE_PLATFORM_IMX_I2C
> -	select IMX_HAVE_PLATFORM_IMX_UART
> -	select IMX_HAVE_PLATFORM_MXC_EHCI
> -	select IMX_HAVE_PLATFORM_MXC_NAND
> -	select IMX_HAVE_PLATFORM_MXC_W1
> -	select USB_ULPI_VIEWPORT if USB_ULPI
> -	select SOC_IMX27
> -	help
> -	  Include support for Eukrea CPUIMX27 platform. This includes
> -	  specific configurations for the module and its peripherals.
> -
> -config MACH_EUKREA_CPUIMX27_USESDHC2
> -	bool "CPUIMX27 integrates SDHC2 module"
> -	depends on MACH_CPUIMX27
> -	select IMX_HAVE_PLATFORM_MXC_MMC
> -	help
> -	  This adds support for the internal SDHC2 used on CPUIMX27
> -	  for wifi or eMMC.
> -
> -config MACH_EUKREA_CPUIMX27_USEUART4
> -	bool "CPUIMX27 integrates UART4 module"
> -	depends on MACH_CPUIMX27
> -	help
> -	  This adds support for the internal UART4 used on CPUIMX27
> -	  for bluetooth.
> -
> -choice
> -	prompt "Baseboard"
> -	depends on MACH_CPUIMX27
> -	default MACH_EUKREA_MBIMX27_BASEBOARD
> -
> -config MACH_EUKREA_MBIMX27_BASEBOARD
> -	bool "Eukrea MBIMX27 development board"
> -	select IMX_HAVE_PLATFORM_IMX_FB
> -	select IMX_HAVE_PLATFORM_IMX_KEYPAD
> -	select IMX_HAVE_PLATFORM_IMX_SSI
> -	select IMX_HAVE_PLATFORM_IMX_UART
> -	select IMX_HAVE_PLATFORM_MXC_MMC
> -	select IMX_HAVE_PLATFORM_SPI_IMX
> -	select LEDS_GPIO_REGISTER
> -	help
> -	  This adds board specific devices that can be found on Eukrea's
> -	  MBIMX27 evaluation board.
> -
> -endchoice
> -
>  config MACH_MX27_3DS
>  	bool "MX27PDK platform"
>  	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 2783d27..2942ec3 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -61,8 +61,6 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
>  obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
>  obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
>  obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
> -obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
> -obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
>  obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
>  obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
>  obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
> diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h
> index a21d331..bb2c90d 100644
> --- a/arch/arm/mach-imx/eukrea-baseboards.h
> +++ b/arch/arm/mach-imx/eukrea-baseboards.h
> @@ -27,23 +27,15 @@
>   * This CPU module needs a baseboard to work. After basic initializing
>   * its own devices, it calls baseboard's init function.
>   * TODO: Add your own baseboard init function and call it from
> - * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
> - * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
> - * or eukrea_cpuimx51sd_init().
> + * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
>   *
>   * This example here is for the development board. Refer
>   * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
> - * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
>   * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
> - * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
> - * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
>   */
>  
>  extern void eukrea_mbimxsd25_baseboard_init(void);
> -extern void eukrea_mbimx27_baseboard_init(void);
>  extern void eukrea_mbimxsd35_baseboard_init(void);
> -extern void eukrea_mbimx51_baseboard_init(void);
> -extern void eukrea_mbimxsd51_baseboard_init(void);
>  
>  #endif
>  
> diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
> deleted file mode 100644
> index b2f08bf..0000000
> --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
> +++ /dev/null
> @@ -1,351 +0,0 @@
> -/*
> - * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
> - *
> - * Based on pcm970-baseboard.c which is :
> - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version 2
> - * of the License, or (at your option) any later version.
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> - * MA 02110-1301, USA.
> - */
> -
> -#include <linux/gpio.h>
> -#include <linux/irq.h>
> -#include <linux/platform_device.h>
> -#include <linux/spi/spi.h>
> -#include <linux/spi/ads7846.h>
> -#include <linux/backlight.h>
> -#include <video/platform_lcd.h>
> -
> -#include <asm/mach/arch.h>
> -
> -#include "common.h"
> -#include "devices-imx27.h"
> -#include "hardware.h"
> -#include "iomux-mx27.h"
> -
> -static const int eukrea_mbimx27_pins[] __initconst = {
> -	/* UART2 */
> -	PE3_PF_UART2_CTS,
> -	PE4_PF_UART2_RTS,
> -	PE6_PF_UART2_TXD,
> -	PE7_PF_UART2_RXD,
> -	/* UART3 */
> -	PE8_PF_UART3_TXD,
> -	PE9_PF_UART3_RXD,
> -	PE10_PF_UART3_CTS,
> -	PE11_PF_UART3_RTS,
> -	/* UART4 */
> -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
> -	PB26_AF_UART4_RTS,
> -	PB28_AF_UART4_TXD,
> -	PB29_AF_UART4_CTS,
> -	PB31_AF_UART4_RXD,
> -#endif
> -	/* SDHC1*/
> -	PE18_PF_SD1_D0,
> -	PE19_PF_SD1_D1,
> -	PE20_PF_SD1_D2,
> -	PE21_PF_SD1_D3,
> -	PE22_PF_SD1_CMD,
> -	PE23_PF_SD1_CLK,
> -	/* display */
> -	PA5_PF_LSCLK,
> -	PA6_PF_LD0,
> -	PA7_PF_LD1,
> -	PA8_PF_LD2,
> -	PA9_PF_LD3,
> -	PA10_PF_LD4,
> -	PA11_PF_LD5,
> -	PA12_PF_LD6,
> -	PA13_PF_LD7,
> -	PA14_PF_LD8,
> -	PA15_PF_LD9,
> -	PA16_PF_LD10,
> -	PA17_PF_LD11,
> -	PA18_PF_LD12,
> -	PA19_PF_LD13,
> -	PA20_PF_LD14,
> -	PA21_PF_LD15,
> -	PA22_PF_LD16,
> -	PA23_PF_LD17,
> -	PA28_PF_HSYNC,
> -	PA29_PF_VSYNC,
> -	PA30_PF_CONTRAST,
> -	PA31_PF_OE_ACD,
> -	/* SPI1 */
> -	PD29_PF_CSPI1_SCLK,
> -	PD30_PF_CSPI1_MISO,
> -	PD31_PF_CSPI1_MOSI,
> -	/* SSI4 */
> -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
> -	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
> -	PC16_PF_SSI4_FS,
> -	PC17_PF_SSI4_RXD | GPIO_PUEN,
> -	PC18_PF_SSI4_TXD | GPIO_PUEN,
> -	PC19_PF_SSI4_CLK,
> -#endif
> -};
> -
> -static const uint32_t eukrea_mbimx27_keymap[] = {
> -	KEY(0, 0, KEY_UP),
> -	KEY(0, 1, KEY_DOWN),
> -	KEY(1, 0, KEY_RIGHT),
> -	KEY(1, 1, KEY_LEFT),
> -};
> -
> -static const struct matrix_keymap_data
> -eukrea_mbimx27_keymap_data __initconst = {
> -	.keymap         = eukrea_mbimx27_keymap,
> -	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
> -};
> -
> -static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
> -	{
> -		.name			= "led1",
> -		.default_trigger	= "heartbeat",
> -		.active_low		= 1,
> -		.gpio			= GPIO_PORTF | 16,
> -	},
> -	{
> -		.name			= "led2",
> -		.default_trigger	= "none",
> -		.active_low		= 1,
> -		.gpio			= GPIO_PORTF | 19,
> -	},
> -};
> -
> -static const struct gpio_led_platform_data
> -		eukrea_mbimx27_gpio_led_info __initconst = {
> -	.leds		= eukrea_mbimx27_gpio_leds,
> -	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
> -};
> -
> -static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
> -	{
> -		.mode = {
> -			.name		= "CMO-QVGA",
> -			.refresh	= 60,
> -			.xres		= 320,
> -			.yres		= 240,
> -			.pixclock	= 156000,
> -			.hsync_len	= 30,
> -			.left_margin	= 38,
> -			.right_margin	= 20,
> -			.vsync_len	= 3,
> -			.upper_margin	= 15,
> -			.lower_margin	= 4,
> -		},
> -		.pcr		= 0xFAD08B80,
> -		.bpp		= 16,
> -	}, {
> -		.mode = {
> -			.name		= "DVI-VGA",
> -			.refresh	= 60,
> -			.xres		= 640,
> -			.yres		= 480,
> -			.pixclock	= 32000,
> -			.hsync_len	= 1,
> -			.left_margin	= 35,
> -			.right_margin	= 0,
> -			.vsync_len	= 1,
> -			.upper_margin	= 7,
> -			.lower_margin	= 0,
> -		},
> -		.pcr		= 0xFA208B80,
> -		.bpp		= 16,
> -	}, {
> -		.mode = {
> -			.name		= "DVI-SVGA",
> -			.refresh	= 60,
> -			.xres		= 800,
> -			.yres		= 600,
> -			.pixclock	= 25000,
> -			.hsync_len	= 1,
> -			.left_margin	= 35,
> -			.right_margin	= 0,
> -			.vsync_len	= 1,
> -			.upper_margin	= 7,
> -			.lower_margin	= 0,
> -		},
> -		.pcr		= 0xFA208B80,
> -		.bpp		= 16,
> -	},
> -};
> -
> -static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
> -	.mode = eukrea_mbimx27_modes,
> -	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
> -
> -	.pwmr		= 0x00A903FF,
> -	.lscr1		= 0x00120300,
> -	.dmacr		= 0x00040060,
> -};
> -
> -static void eukrea_mbimx27_bl_set_intensity(int intensity)
> -{
> -	if (intensity)
> -		gpio_direction_output(GPIO_PORTE | 5, 1);
> -	else
> -		gpio_direction_output(GPIO_PORTE | 5, 0);
> -}
> -
> -static struct generic_bl_info eukrea_mbimx27_bl_info = {
> -	.name			= "eukrea_mbimx27-bl",
> -	.max_intensity		= 0xff,
> -	.default_intensity	= 0xff,
> -	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
> -};
> -
> -static struct platform_device eukrea_mbimx27_bl_dev = {
> -	.name			= "generic-bl",
> -	.id			= 1,
> -	.dev = {
> -		.platform_data	= &eukrea_mbimx27_bl_info,
> -	},
> -};
> -
> -static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
> -				   unsigned int power)
> -{
> -	if (power)
> -		gpio_direction_output(GPIO_PORTA | 25, 1);
> -	else
> -		gpio_direction_output(GPIO_PORTA | 25, 0);
> -}
> -
> -static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
> -	.set_power		= eukrea_mbimx27_lcd_power_set,
> -};
> -
> -static struct platform_device eukrea_mbimx27_lcd_powerdev = {
> -	.name			= "platform-lcd",
> -	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
> -};
> -
> -static const struct imxuart_platform_data uart_pdata __initconst = {
> -	.flags = IMXUART_HAVE_RTSCTS,
> -};
> -
> -#define ADS7846_PENDOWN (GPIO_PORTD | 25)
> -
> -static void __maybe_unused ads7846_dev_init(void)
> -{
> -	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
> -		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
> -		return;
> -	}
> -	gpio_direction_input(ADS7846_PENDOWN);
> -}
> -
> -static int ads7846_get_pendown_state(void)
> -{
> -	return !gpio_get_value(ADS7846_PENDOWN);
> -}
> -
> -static struct ads7846_platform_data ads7846_config __initdata = {
> -	.get_pendown_state	= ads7846_get_pendown_state,
> -	.keep_vref_on		= 1,
> -};
> -
> -static struct spi_board_info __maybe_unused
> -		eukrea_mbimx27_spi_board_info[] __initdata = {
> -	[0] = {
> -		.modalias	= "ads7846",
> -		.bus_num	= 0,
> -		.chip_select	= 0,
> -		.max_speed_hz	= 1500000,
> -		/* irq number is run-time assigned */
> -		.platform_data	= &ads7846_config,
> -		.mode           = SPI_MODE_2,
> -	},
> -};
> -
> -static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
> -
> -static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
> -	.chipselect	= eukrea_mbimx27_spi_cs,
> -	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
> -};
> -
> -static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
> -	{
> -		I2C_BOARD_INFO("tlv320aic23", 0x1a),
> -	},
> -};
> -
> -static const struct imxmmc_platform_data sdhc_pdata __initconst = {
> -	.dat3_card_detect = 1,
> -};
> -
> -static const
> -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
> -	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
> -};
> -
> -/*
> - * system init for baseboard usage. Will be called by cpuimx27 init.
> - *
> - * Add platform devices present on this baseboard and init
> - * them from CPU side as far as required to use them later on
> - */
> -void __init eukrea_mbimx27_baseboard_init(void)
> -{
> -	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
> -		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
> -
> -	imx27_add_imx_uart1(&uart_pdata);
> -	imx27_add_imx_uart2(&uart_pdata);
> -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
> -	imx27_add_imx_uart3(&uart_pdata);
> -#endif
> -
> -	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
> -	imx27_add_mxc_mmc(0, &sdhc_pdata);
> -
> -	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
> -				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
> -
> -	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
> -
> -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
> -	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
> -	/* ADS7846 Touchscreen controller init */
> -	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
> -	ads7846_dev_init();
> -#endif
> -
> -	/* SPI_CS0 init */
> -	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
> -	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
> -	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
> -	spi_register_board_info(eukrea_mbimx27_spi_board_info,
> -			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
> -
> -	/* Leds configuration */
> -	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
> -	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
> -	/* Backlight */
> -	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
> -	gpio_request(GPIO_PORTE | 5, "backlight");
> -	platform_device_register(&eukrea_mbimx27_bl_dev);
> -	/* LCD Reset */
> -	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
> -	gpio_request(GPIO_PORTA | 25, "lcd_enable");
> -	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
> -
> -	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
> -
> -	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
> -	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
> -}
> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
> deleted file mode 100644
> index e6d4b99..0000000
> --- a/arch/arm/mach-imx/mach-cpuimx27.c
> +++ /dev/null
> @@ -1,321 +0,0 @@
> -/*
> - * Copyright (C) 2009 Eric Benard - eric@eukrea.com
> - *
> - * Based on pcm038.c which is :
> - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
> - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version 2
> - * of the License, or (at your option) any later version.
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> - * MA 02110-1301, USA.
> - */
> -
> -#include <linux/i2c.h>
> -#include <linux/io.h>
> -#include <linux/mtd/plat-ram.h>
> -#include <linux/mtd/physmap.h>
> -#include <linux/platform_device.h>
> -#include <linux/serial_8250.h>
> -#include <linux/usb/otg.h>
> -#include <linux/usb/ulpi.h>
> -
> -#include <asm/mach-types.h>
> -#include <asm/mach/arch.h>
> -#include <asm/mach/time.h>
> -#include <asm/mach/map.h>
> -
> -#include "common.h"
> -#include "devices-imx27.h"
> -#include "ehci.h"
> -#include "eukrea-baseboards.h"
> -#include "hardware.h"
> -#include "iomux-mx27.h"
> -#include "ulpi.h"
> -
> -static const int eukrea_cpuimx27_pins[] __initconst = {
> -	/* UART1 */
> -	PE12_PF_UART1_TXD,
> -	PE13_PF_UART1_RXD,
> -	PE14_PF_UART1_CTS,
> -	PE15_PF_UART1_RTS,
> -	/* UART4 */
> -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
> -	PB26_AF_UART4_RTS,
> -	PB28_AF_UART4_TXD,
> -	PB29_AF_UART4_CTS,
> -	PB31_AF_UART4_RXD,
> -#endif
> -	/* FEC */
> -	PD0_AIN_FEC_TXD0,
> -	PD1_AIN_FEC_TXD1,
> -	PD2_AIN_FEC_TXD2,
> -	PD3_AIN_FEC_TXD3,
> -	PD4_AOUT_FEC_RX_ER,
> -	PD5_AOUT_FEC_RXD1,
> -	PD6_AOUT_FEC_RXD2,
> -	PD7_AOUT_FEC_RXD3,
> -	PD8_AF_FEC_MDIO,
> -	PD9_AIN_FEC_MDC,
> -	PD10_AOUT_FEC_CRS,
> -	PD11_AOUT_FEC_TX_CLK,
> -	PD12_AOUT_FEC_RXD0,
> -	PD13_AOUT_FEC_RX_DV,
> -	PD14_AOUT_FEC_RX_CLK,
> -	PD15_AOUT_FEC_COL,
> -	PD16_AIN_FEC_TX_ER,
> -	PF23_AIN_FEC_TX_EN,
> -	/* I2C1 */
> -	PD17_PF_I2C_DATA,
> -	PD18_PF_I2C_CLK,
> -	/* SDHC2 */
> -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
> -	PB4_PF_SD2_D0,
> -	PB5_PF_SD2_D1,
> -	PB6_PF_SD2_D2,
> -	PB7_PF_SD2_D3,
> -	PB8_PF_SD2_CMD,
> -	PB9_PF_SD2_CLK,
> -#endif
> -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
> -	/* Quad UART's IRQ */
> -	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
> -	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
> -	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
> -	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
> -#endif
> -	/* OTG */
> -	PC7_PF_USBOTG_DATA5,
> -	PC8_PF_USBOTG_DATA6,
> -	PC9_PF_USBOTG_DATA0,
> -	PC10_PF_USBOTG_DATA2,
> -	PC11_PF_USBOTG_DATA1,
> -	PC12_PF_USBOTG_DATA4,
> -	PC13_PF_USBOTG_DATA3,
> -	PE0_PF_USBOTG_NXT,
> -	PE1_PF_USBOTG_STP,
> -	PE2_PF_USBOTG_DIR,
> -	PE24_PF_USBOTG_CLK,
> -	PE25_PF_USBOTG_DATA7,
> -	/* USBH2 */
> -	PA0_PF_USBH2_CLK,
> -	PA1_PF_USBH2_DIR,
> -	PA2_PF_USBH2_DATA7,
> -	PA3_PF_USBH2_NXT,
> -	PA4_PF_USBH2_STP,
> -	PD19_AF_USBH2_DATA4,
> -	PD20_AF_USBH2_DATA3,
> -	PD21_AF_USBH2_DATA6,
> -	PD22_AF_USBH2_DATA0,
> -	PD23_AF_USBH2_DATA2,
> -	PD24_AF_USBH2_DATA1,
> -	PD26_AF_USBH2_DATA5,
> -};
> -
> -static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
> -	.width = 2,
> -};
> -
> -static struct resource eukrea_cpuimx27_flash_resource = {
> -	.start = 0xc0000000,
> -	.end   = 0xc3ffffff,
> -	.flags = IORESOURCE_MEM,
> -};
> -
> -static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
> -	.name = "physmap-flash",
> -	.id = 0,
> -	.dev = {
> -		.platform_data = &eukrea_cpuimx27_flash_data,
> -	},
> -	.num_resources = 1,
> -	.resource = &eukrea_cpuimx27_flash_resource,
> -};
> -
> -static const struct imxuart_platform_data uart_pdata __initconst = {
> -	.flags = IMXUART_HAVE_RTSCTS,
> -};
> -
> -static const struct mxc_nand_platform_data
> -cpuimx27_nand_board_info __initconst = {
> -	.width = 1,
> -	.hw_ecc = 1,
> -};
> -
> -static struct platform_device *platform_devices[] __initdata = {
> -	&eukrea_cpuimx27_nor_mtd_device,
> -};
> -
> -static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
> -	.bitrate = 100000,
> -};
> -
> -static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
> -	{
> -		I2C_BOARD_INFO("pcf8563", 0x51),
> -	},
> -};
> -
> -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
> -static struct plat_serial8250_port serial_platform_data[] = {
> -	{
> -		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
> -		/* irq number is run-time assigned */
> -		.uartclk = 14745600,
> -		.regshift = 1,
> -		.iotype = UPIO_MEM,
> -		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> -	}, {
> -		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
> -		/* irq number is run-time assigned */
> -		.uartclk = 14745600,
> -		.regshift = 1,
> -		.iotype = UPIO_MEM,
> -		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> -	}, {
> -		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
> -		/* irq number is run-time assigned */
> -		.uartclk = 14745600,
> -		.regshift = 1,
> -		.iotype = UPIO_MEM,
> -		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> -	}, {
> -		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
> -		/* irq number is run-time assigned */
> -		.uartclk = 14745600,
> -		.regshift = 1,
> -		.iotype = UPIO_MEM,
> -		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> -	}, {
> -	}
> -};
> -
> -static struct platform_device serial_device = {
> -	.name = "serial8250",
> -	.id = 0,
> -	.dev = {
> -		.platform_data = serial_platform_data,
> -	},
> -};
> -#endif
> -
> -static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
> -{
> -	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
> -}
> -
> -static struct mxc_usbh_platform_data otg_pdata __initdata = {
> -	.init	= eukrea_cpuimx27_otg_init,
> -	.portsc	= MXC_EHCI_MODE_ULPI,
> -};
> -
> -static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
> -{
> -	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
> -}
> -
> -static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
> -	.init	= eukrea_cpuimx27_usbh2_init,
> -	.portsc	= MXC_EHCI_MODE_ULPI,
> -};
> -
> -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
> -	.operating_mode = FSL_USB2_DR_DEVICE,
> -	.phy_mode       = FSL_USB2_PHY_ULPI,
> -};
> -
> -static bool otg_mode_host __initdata;
> -
> -static int __init eukrea_cpuimx27_otg_mode(char *options)
> -{
> -	if (!strcmp(options, "host"))
> -		otg_mode_host = true;
> -	else if (!strcmp(options, "device"))
> -		otg_mode_host = false;
> -	else
> -		pr_info("otg_mode neither \"host\" nor \"device\". "
> -			"Defaulting to device\n");
> -	return 1;
> -}
> -__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
> -
> -static void __init eukrea_cpuimx27_init(void)
> -{
> -	imx27_soc_init();
> -
> -	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
> -		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
> -
> -	imx27_add_imx_uart0(&uart_pdata);
> -
> -	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
> -
> -	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
> -				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
> -
> -	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
> -
> -	imx27_add_fec(NULL);
> -	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
> -	imx27_add_imx2_wdt();
> -	imx27_add_mxc_w1();
> -
> -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
> -	/* SDHC2 can be used for Wifi */
> -	imx27_add_mxc_mmc(1, NULL);
> -#endif
> -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
> -	/* in which case UART4 is also used for Bluetooth */
> -	imx27_add_imx_uart3(&uart_pdata);
> -#endif
> -
> -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
> -	serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
> -	serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
> -	serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
> -	serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
> -	platform_device_register(&serial_device);
> -#endif
> -
> -	if (otg_mode_host) {
> -		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
> -				ULPI_OTG_DRVVBUS_EXT);
> -		if (otg_pdata.otg)
> -			imx27_add_mxc_ehci_otg(&otg_pdata);
> -	} else {
> -		imx27_add_fsl_usb2_udc(&otg_device_pdata);
> -	}
> -
> -	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
> -			ULPI_OTG_DRVVBUS_EXT);
> -	if (usbh2_pdata.otg)
> -		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
> -
> -#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
> -	eukrea_mbimx27_baseboard_init();
> -#endif
> -}
> -
> -static void __init eukrea_cpuimx27_timer_init(void)
> -{
> -	mx27_clocks_init(26000000);
> -}
> -
> -MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
> -	.atag_offset = 0x100,
> -	.map_io = mx27_map_io,
> -	.init_early = imx27_init_early,
> -	.init_irq = mx27_init_irq,
> -	.init_time	= eukrea_cpuimx27_timer_init,
> -	.init_machine = eukrea_cpuimx27_init,
> -	.restart	= mxc_restart,
> -MACHINE_END

Sat, 26 Jul 2014 20:20:42 +0200 от Eric Bénard <eric@eukrea.com>:
> Le Sat, 26 Jul 2014 17:41:08 +0400,
> Alexander Shiyan <shc_work@mail.ru> a écrit :
> 
> > 
> > eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
> > devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
> > imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.
> > 
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> Acked-by: Eric Bénard <eric@eukrea.com>
> 
> Thanks !

Can I make a similar patch for Eukrea-i.MX25/35 boards?

---

Hi Alexander,

Le Sun, 27 Jul 2014 10:18:24 +0400,
Alexander Shiyan <shc_work@mail.ru> a écrit :

> Sat, 26 Jul 2014 20:20:42 +0200 от Eric Bénard <eric@eukrea.com>:
> > Le Sat, 26 Jul 2014 17:41:08 +0400,
> > Alexander Shiyan <shc_work@mail.ru> a écrit :
> > 
> > > 
> > > eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
> > > devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
> > > imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.
> > > 
> > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > Acked-by: Eric Bénard <eric@eukrea.com>
> > 
> > Thanks !
> 
> Can I make a similar patch for Eukrea-i.MX25/35 boards?
> 
I have to check with Denis if we have the same level of support in DT
before, then we can remove the non DT support.

Eric

On Sat, Jul 26, 2014 at 05:41:08PM +0400, Alexander Shiyan wrote:
> eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
> devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
> imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Applied, thanks.