diff mbox

[v2,2/2] net: macb: Handle errors in RX path

Message ID 53C91658.208@neotion.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Neil Armstrong July 18, 2014, 12:43 p.m. UTC 
In certain circumstances, the MACB fails to write correct RX ring
descriptor, and lead to actually managed by BUG_ON() error cases.

Handle these two cases by returning error values, while resetting
the RX ring and RX HW path in the poll methos.

In the same time, check and handle BNA and OVR into poll method
by using the same error management.

Signed-off-by: Neil Armstrong <narmstrong@neotion.com>
---
 drivers/net/ethernet/cadence/macb.c |   54 +++++++++++++++++++++++++++++++---
 1 files changed, 49 insertions(+), 5 deletions(-)

Comments

David Miller July 21, 2014, 4:11 a.m. UTC | #1 
From: Neil Armstrong <narmstrong@neotion.com>
Date: Fri, 18 Jul 2014 14:43:04 +0200

> @@ -872,12 +890,22 @@ static int macb_poll(struct napi_struct *napi, int budget)
>  	status = macb_readl(bp, RSR);
>  	macb_writel(bp, RSR, status);
>  
> -	work_done = 0;
> +	work_done = -EIO;
>  
>  	netdev_vdbg(bp->dev, "poll: status = %08lx, budget = %d\n",
> -		   (unsigned long)status, budget);
> +			(unsigned long)status, budget);
> +
> +	if (status & (MACB_BIT(OVR) | MACB_BIT(BNA)) ||
> +	    !(status & MACB_BIT(REC))) {
> +		netdev_err(bp->dev, "RX error, status = %02lx\n",
> +			   (unsigned long)status);
> +		goto rx_out;
 ...
> @@ -892,7 +920,23 @@ static int macb_poll(struct napi_struct *napi, int budget)
>  		}
>  	}
>  
> -	/* TODO: Handle errors */
> +	return work_done;
> +
> +rx_out:
> +	/* In case of error, disable RX and reset
> +	 * the descriptor ring before re-enabling RX.
> +	 */
> +	macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(RE));
> +
> +	bp->macbgem_ops.mog_init_rx_rings(bp);
> +	macb_writel(bp, RBQP, bp->rx_ring_dma);
> +
> +	/* Re-enable RX and get notified for new packets */
> +	macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(RE));
> +
> +	napi_complete(napi);
> +
> +	macb_writel(bp, IER, MACB_RX_INT_FLAGS);
>  
>  	return work_done;

Do not return negative error codes, as you will in this path due to the
work_done = -EIO initialization, from the NAPI poll method.

You must always return the amount of work you processed, which you can
force to zero on errors that caused the chip to be reset and you thus
want polling to force terminate.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 4d73110..81429df 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -755,6 +755,17 @@  static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
 		macb_rx_ring_wrap(first_frag),
 		macb_rx_ring_wrap(last_frag), len);
 
+	if (!(desc->ctrl & MACB_BIT(RX_EOF))) {
+		netdev_vdbg(bp->dev, "macb_rx_frame missing EOF\n");
+		return -EIO;
+	}
+
+	desc = macb_rx_desc(bp, first_frag);
+	if (!(desc->ctrl & MACB_BIT(RX_SOF))) {
+		netdev_vdbg(bp->dev, "macb_rx_frame missing SOF\n");
+		return -EIO;
+	}
+
 	/*
 	 * The ethernet header starts NET_IP_ALIGN bytes into the
 	 * first buffer. Since the header is 14 bytes, this makes the
@@ -789,7 +800,10 @@  static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
 		unsigned int frag_len = bp->rx_buffer_size;
 
 		if (offset + frag_len > len) {
-			BUG_ON(frag != last_frag);
+			if (frag != last_frag) {
+				dev_kfree_skb_any(skb);
+				return -EIO;
+			}
 			frag_len = len - offset;
 		}
 		skb_copy_to_linear_data_offset(skb, offset,
@@ -844,9 +858,13 @@  static int macb_rx(struct macb *bp, int budget)
 
 		if (ctrl & MACB_BIT(RX_EOF)) {
 			int dropped;
-			BUG_ON(first_frag == -1);
+			if (first_frag == -1)
+				return -EIO;
 
 			dropped = macb_rx_frame(bp, first_frag, tail);
+			if (dropped < 0)
+				return dropped;
+
 			first_frag = -1;
 			if (!dropped) {
 				received++;
@@ -872,12 +890,22 @@  static int macb_poll(struct napi_struct *napi, int budget)
 	status = macb_readl(bp, RSR);
 	macb_writel(bp, RSR, status);
 
-	work_done = 0;
+	work_done = -EIO;
 
 	netdev_vdbg(bp->dev, "poll: status = %08lx, budget = %d\n",
-		   (unsigned long)status, budget);
+			(unsigned long)status, budget);
+
+	if (status & (MACB_BIT(OVR) | MACB_BIT(BNA)) ||
+	    !(status & MACB_BIT(REC))) {
+		netdev_err(bp->dev, "RX error, status = %02lx\n",
+			   (unsigned long)status);
+		goto rx_out;
+	}
 
 	work_done = bp->macbgem_ops.mog_rx(bp, budget);
+	if (work_done < 0)
+		goto rx_out;
+
 	if (work_done < budget) {
 		napi_complete(napi);
 
@@ -892,7 +920,23 @@  static int macb_poll(struct napi_struct *napi, int budget)
 		}
 	}
 
-	/* TODO: Handle errors */
+	return work_done;
+
+rx_out:
+	/* In case of error, disable RX and reset
+	 * the descriptor ring before re-enabling RX.
+	 */
+	macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(RE));
+
+	bp->macbgem_ops.mog_init_rx_rings(bp);
+	macb_writel(bp, RBQP, bp->rx_ring_dma);
+
+	/* Re-enable RX and get notified for new packets */
+	macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(RE));
+
+	napi_complete(napi);
+
+	macb_writel(bp, IER, MACB_RX_INT_FLAGS);
 
 	return work_done;
 }