serial: efm32: correct namespacing of location property
diff mbox

Message ID 1405066605-12801-1-git-send-email-u.kleine-koenig@pengutronix.de
State New
Headers show

Commit Message

Uwe Kleine-König July 11, 2014, 8:16 a.m. UTC
Olof Johansson pointed out that usually the company name is picked as
namespace prefix to specific properties. So expect "energymicro,location"
but fall back to the previously introduced name "efm32,location".

Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 Documentation/devicetree/bindings/serial/efm32-uart.txt | 4 ++--
 drivers/tty/serial/efm32-uart.c                         | 8 +++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
index 3ca01336b837..8adbab268ca3 100644
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt
@@ -6,7 +6,7 @@  Required properties:
 - interrupts : Should contain uart interrupt
 
 Optional properties:
-- efm32,location : Decides the location of the USART I/O pins.
+- energymicro,location : Decides the location of the USART I/O pins.
   Allowed range : [0 .. 5]
   Default: 0
 
@@ -16,5 +16,5 @@  uart@0x4000c400 {
 	compatible = "energymicro,efm32-uart";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15>;
-	efm32,location = <0>;
+	energymicro,location = <0>;
 };
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 3b0ee9afd76f..cb007a4f4d15 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -671,10 +671,16 @@  static int efm32_uart_probe_dt(struct platform_device *pdev,
 	if (!np)
 		return 1;
 
-	ret = of_property_read_u32(np, "efm32,location", &location);
+	ret = of_property_read_u32(np, "energymicro,location", &location);
+
+	if (ret)
+		/* fall back to wrongly namespaced property */
+		ret = of_property_read_u32(np, "efm32,location", &location);
+
 	if (ret)
 		/* fall back to old and (wrongly) generic property "location" */
 		ret = of_property_read_u32(np, "location", &location);
+
 	if (!ret) {
 		if (location > 5) {
 			dev_err(&pdev->dev, "invalid location\n");