[02/15] target-tricore: Add board for systemmode

diff --git a/hw/tricore/Makefile.objs b/hw/tricore/Makefile.objs
new file mode 100644
index 0000000..435e095
--- /dev/null
+++ b/hw/tricore/Makefile.objs
@@ -0,0 +1 @@ 
+obj-y += tricore_testboard.o
diff --git a/hw/tricore/tricore_testboard.c b/hw/tricore/tricore_testboard.c
new file mode 100644
index 0000000..e5574f6
--- /dev/null
+++ b/hw/tricore/tricore_testboard.c
@@ -0,0 +1,130 @@ 
+/*
+ * TriCore Baseboard System emulation.
+ *
+ * Copyright (c) 2014 Bastian Koppelmann
+ *
+ * This code is licensed under the GPL.
+ */
+
+#include "hw/hw.h"
+#include "hw/devices.h"
+#include "net/net.h"
+#include "sysemu/sysemu.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "sysemu/blockdev.h"
+#include "exec/address-spaces.h"
+#include "hw/block/flash.h"
+#include "elf.h"
+#include "hw/tricore/tricore.h"
+
+#define TRICORE_FLASH_ADDR 0xa0000000
+#define TRICORE_FLASH_SIZE (2 * 1024 * 1024)
+#define TRICORE_FLASH_SECT_SIZE (256 * 1024)
+
+
+/* Board init.  */
+
+static struct tricore_boot_info tricoretb_binfo;
+
+static void tricore_load_kernel(CPUTRICOREState *env)
+{
+    int64_t entry;
+    long kernel_size;
+
+    kernel_size = load_elf(tricoretb_binfo.kernel_filename, NULL,
+                           NULL, (uint64_t *)&entry, NULL,
+                           NULL, 0,
+                           ELF_MACHINE, 1);
+    if (kernel_size <= 0) {
+        fprintf(stderr, "qemu: no kernel file '%s'\n",
+                tricoretb_binfo.kernel_filename);
+        exit(1);
+    }
+    env->active_tc.PC = entry;
+
+}
+
+static void tricore_testboard_init(MachineState *machine, int board_id)
+{
+    TRICORECPU *cpu;
+    CPUTRICOREState *env;
+
+    MemoryRegion *sysmem = get_system_memory();
+    MemoryRegion *ext_cram = g_new(MemoryRegion, 1);
+    MemoryRegion *ext_dram = g_new(MemoryRegion, 1);
+    MemoryRegion *int_cram = g_new(MemoryRegion, 1);
+    MemoryRegion *int_dram = g_new(MemoryRegion, 1);
+    MemoryRegion *pcp_data = g_new(MemoryRegion, 1);
+    MemoryRegion *pcp_text = g_new(MemoryRegion, 1);
+    DriveInfo *dinfo;
+
+    if (!machine->cpu_model) {
+        machine->cpu_model = "TC1796";
+    }
+    cpu = cpu_tricore_init(machine->cpu_model);
+    env = &cpu->env;
+    if (!cpu) {
+        fprintf(stderr, "Unable to find CPU definition\n");
+        exit(1);
+    }
+    memory_region_init_ram(ext_cram, NULL, "powerlink_ext_c.ram", 2*1024*1024);
+    vmstate_register_ram_global(ext_cram);
+    memory_region_init_ram(ext_dram, NULL, "powerlink_ext_d.ram", 4*1024*1024);
+    vmstate_register_ram_global(ext_dram);
+    memory_region_init_ram(int_cram, NULL, "powerlink_int_c.ram", 48*1024);
+    vmstate_register_ram_global(int_cram);
+    memory_region_init_ram(int_dram, NULL, "powerlink_int_d.ram", 48*1024);
+    vmstate_register_ram_global(int_dram);
+    memory_region_init_ram(pcp_data, NULL, "powerlink_pcp_data.ram", 16*1024);
+    vmstate_register_ram_global(pcp_data);
+    memory_region_init_ram(pcp_text, NULL, "powerlink_pcp_text.ram", 32*1024);
+    vmstate_register_ram_global(pcp_text);
+
+    memory_region_add_subregion(sysmem, 0x80000000, ext_cram);
+    memory_region_add_subregion(sysmem, 0xa1000000, ext_dram);
+    memory_region_add_subregion(sysmem, 0xd4000000, int_cram);
+    memory_region_add_subregion(sysmem, 0xd0000000, int_dram);
+    memory_region_add_subregion(sysmem, 0xf0050000, pcp_data);
+    memory_region_add_subregion(sysmem, 0xf0060000, pcp_text);
+
+    dinfo = drive_get(IF_PFLASH, 0, 0);
+    if (!pflash_cfi01_register(TRICORE_FLASH_ADDR, NULL,
+                          "tricore_testboard.flash",
+                          TRICORE_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
+                          TRICORE_FLASH_SECT_SIZE,
+                          TRICORE_FLASH_SIZE / TRICORE_FLASH_SECT_SIZE,
+                          2, 0x00, 0x00, 0x0000, 0x0, 0)) {
+
+        fprintf(stderr, "qemu: Error registering flash memory.\n");
+    } else {
+        env->active_tc.PC = TRICORE_FLASH_ADDR;
+    }
+
+    tricoretb_binfo.ram_size = machine->ram_size;
+    tricoretb_binfo.kernel_filename = machine->kernel_filename;
+
+    if (machine->kernel_filename) {
+        tricore_load_kernel(env);
+    }
+}
+
+static void tricoreboard_init(MachineState *machine)
+{
+    tricore_testboard_init(machine, 0x183);
+}
+
+static QEMUMachine ttb_machine = {
+    .name = "TriCore testboard",
+    .desc = "Just for testing",
+    .init = tricoreboard_init,
+    .is_default = 1,
+};
+
+static void tricore_testboard_machine_init(void)
+{
+    qemu_register_machine(&ttb_machine);
+}
+
+machine_init(tricore_testboard_machine_init);
+
diff --git a/include/hw/tricore/tricore.h b/include/hw/tricore/tricore.h
new file mode 100644
index 0000000..4e68174
--- /dev/null
+++ b/include/hw/tricore/tricore.h
@@ -0,0 +1,54 @@ 
+#ifndef TRICORE_MISC_H
+#define TRICORE_MISC_H 1
+
+#include "exec/memory.h"
+#include "hw/irq.h"
+
+struct tricore_boot_info {
+    uint64_t ram_size;
+    const char *kernel_filename;
+    const char *kernel_cmdline;
+    const char *initrd_filename;
+    const char *dtb_filename;
+    hwaddr loader_start;
+    /* multicore boards that use the default secondary core boot functions
+     * need to put the address of the secondary boot code, the boot reg,
+     * and the GIC address in the next 3 values, respectively. boards that
+     * have their own boot functions can use these values as they want.
+     */
+    hwaddr smp_loader_start;
+    hwaddr smp_bootreg_addr;
+    hwaddr gic_cpu_if_addr;
+    int nb_cpus;
+    int board_id;
+    int (*atag_board)(const struct tricore_boot_info *info, void *p);
+    /* multicore boards that use the default secondary core boot functions
+     * can ignore these two function calls. If the default functions won't
+     * work, then write_secondary_boot() should write a suitable blob of
+     * code mimicking the secondary CPU startup process used by the board's
+     * boot loader/boot ROM code, and secondary_cpu_reset_hook() should
+     * perform any necessary CPU reset handling and set the PC for the
+     * secondary CPUs to point at this boot blob.
+     */
+    void (*write_secondary_boot)(TRICORECPU *cpu,
+                                 const struct tricore_boot_info *info);
+    void (*secondary_cpu_reset_hook)(TRICORECPU *cpu,
+                                     const struct tricore_boot_info *info);
+    /* if a board is able to create a dtb without a dtb file then it
+     * sets get_dtb. This will only be used if no dtb file is provided
+     * by the user. On success, sets *size to the length of the created
+     * dtb, and returns a pointer to it. (The caller must free this memory
+     * with g_free() when it has finished with it.) On failure, returns NULL.
+     */
+    void *(*get_dtb)(const struct tricore_boot_info *info, int *size);
+    /* if a board needs to be able to modify a device tree provided by
+     * the user it should implement this hook.
+     */
+    void (*modify_dtb)(const struct tricore_boot_info *info, void *fdt);
+    /* Used internally by arm_boot.c */
+    int is_linux;
+    hwaddr initrd_start;
+    hwaddr initrd_size;
+    hwaddr entry;
+};
+#endif