diff mbox

[RFC,v2,5/5] dt: rtc: add binding document for qpnp rtc

Message ID 1404393243-7324-6-git-send-email-svarbanov@mm-sol.com
State Superseded, archived
Headers show

Commit Message

Stanimir Varbanov July 3, 2014, 1:14 p.m. UTC 
Add devicetree binding document which describes the qpnp-rtc.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
---
 .../devicetree/bindings/rtc/qcom,rtc-qpnp.txt      |   24 ++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/qcom,rtc-qpnp.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/rtc/qcom,rtc-qpnp.txt b/Documentation/devicetree/bindings/rtc/qcom,rtc-qpnp.txt
new file mode 100644
index 0000000..a64e194
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/qcom,rtc-qpnp.txt
@@ -0,0 +1,24 @@ 
+Qualcomm RTC QPNP
+
+The RTC device supports 32bit RTC module housed inside QPNP PMIC's.
+The driver utilizes SPMI interface to communicate with the RTC module.
+RTC device is divided into two sub-peripherals one which controls
+basic RTC and other for controlling alarm.
+
+Required properties :
+ - compatible:  Should be "qcom,qpnp-rtc".
+ - reg:         Specify the peripheral id for device. Currently there
+                are two sub-peripherals - rtc base and alarm base.
+ - reg-names:   Specify the reg property as strings. Should be "rtc"
+                and "alarm", defining the rtc and alarm bases.
+ - interrupts:  Specifies alarm interrupt, only for alarm sub-peripheral.
+                For more info about interrupt cells see
+                Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+
+Example:
+	rtc@6000 {
+		compatible = "qcom,qpnp-rtc";
+		reg = <0x6000 0x6100>;
+		reg-names = "rtc", "alarm";
+		interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+	};