diff mbox

[3.11,071/198] usb: usbtest: fix unlink write error with pattern 1

Message ID 1404379241-8590-72-git-send-email-luis.henriques@canonical.com
State New
Headers show

Commit Message

Luis Henriques July 3, 2014, 9:18 a.m. UTC 
3.11.10.13 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huang Rui <ray.huang@amd.com>

commit e4d58f5dcb7d7be45df8def31881ebfae99c75da upstream.

TEST 12 and TEST 24 unlinks the URB write request for N times. When
host and gadget both initialize pattern 1 (mod 63) data series to
transfer, the gadget side will complain the wrong data which is not
expected.  Because in host side, usbtest doesn't fill the data buffer
as mod 63 and this patch fixed it.

[20285.488974] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready
[20285.489181] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active
[20285.489423] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb50800 length 512 last
[20285.489727] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000
[20285.490055] dwc3 dwc3.0.auto: Command Complete --> 0
[20285.490281] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready
[20285.490492] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Active
[20285.490713] dwc3 dwc3.0.auto: ep1out-bulk: endpoint busy
[20285.490909] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Complete
[20285.491117] dwc3 dwc3.0.auto: request ffff8800aa6cb480 from ep1out-bulk completed 512/512 ===> 0
[20285.491431] zero gadget: bad OUT byte, buf[1] = 0
[20285.491605] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Set Stall' params 00000000 00000000 00000000
[20285.491915] dwc3 dwc3.0.auto: Command Complete --> 0
[20285.492099] dwc3 dwc3.0.auto: queing request ffff8800aa6cb480 to ep1out-bulk length 512
[20285.492387] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready
[20285.492595] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active
[20285.492830] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb51000 length 512 last
[20285.493135] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000
[20285.493465] dwc3 dwc3.0.auto: Command Complete --> 0

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/misc/usbtest.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox

Patch

diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 8b4ca1cb450a..a36c46c9318a 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1149,6 +1149,11 @@  static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async)
 	urb->context = &completion;
 	urb->complete = unlink1_callback;
 
+	if (usb_pipeout(urb->pipe)) {
+		simple_fill_buf(urb);
+		urb->transfer_flags |= URB_ZERO_PACKET;
+	}
+
 	/* keep the endpoint busy.  there are lots of hc/hcd-internal
 	 * states, and testing should get to all of them over time.
 	 *
@@ -1279,6 +1284,11 @@  static int unlink_queued(struct usbtest_dev *dev, int pipe, unsigned num,
 				unlink_queued_callback, &ctx);
 		ctx.urbs[i]->transfer_dma = buf_dma;
 		ctx.urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+
+		if (usb_pipeout(ctx.urbs[i]->pipe)) {
+			simple_fill_buf(ctx.urbs[i]);
+			ctx.urbs[i]->transfer_flags |= URB_ZERO_PACKET;
+		}
 	}
 
 	/* Submit all the URBs and then unlink URBs num - 4 and num - 2. */