@@ -24,6 +24,7 @@
#include "hw/sysbus.h"
#include "trace.h"
#include "hw/virtio/virtio-serial.h"
+#include "hw/virtio/virtio-access.h"
static VirtIOSerialPort *find_port_by_id(VirtIOSerial *vser, uint32_t id)
{
@@ -183,11 +184,12 @@ static size_t send_control_msg(VirtIOSerial *vser, void *buf, size_t len)
static size_t send_control_event(VirtIOSerial *vser, uint32_t port_id,
uint16_t event, uint16_t value)
{
+ VirtIODevice *vdev = VIRTIO_DEVICE(vser);
struct virtio_console_control cpkt;
- stl_p(&cpkt.id, port_id);
- stw_p(&cpkt.event, event);
- stw_p(&cpkt.value, value);
+ virtio_stl_p(vdev, &cpkt.id, port_id);
+ virtio_stw_p(vdev, &cpkt.event, event);
+ virtio_stw_p(vdev, &cpkt.value, value);
trace_virtio_serial_send_control_event(port_id, event, value);
return send_control_msg(vser, &cpkt, sizeof(cpkt));
@@ -278,6 +280,7 @@ void virtio_serial_throttle_port(VirtIOSerialPort *port, bool throttle)
/* Guest wants to notify us of some event */
static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
{
+ VirtIODevice *vdev = VIRTIO_DEVICE(vser);
struct VirtIOSerialPort *port;
VirtIOSerialPortClass *vsc;
struct virtio_console_control cpkt, *gcpkt;
@@ -291,8 +294,8 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
return;
}
- cpkt.event = lduw_p(&gcpkt->event);
- cpkt.value = lduw_p(&gcpkt->value);
+ cpkt.event = virtio_lduw_p(vdev, &gcpkt->event);
+ cpkt.value = virtio_lduw_p(vdev, &gcpkt->value);
trace_virtio_serial_handle_control_message(cpkt.event, cpkt.value);
@@ -312,10 +315,10 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
return;
}
- port = find_port_by_id(vser, ldl_p(&gcpkt->id));
+ port = find_port_by_id(vser, virtio_ldl_p(vdev, &gcpkt->id));
if (!port) {
error_report("virtio-serial-bus: Unexpected port id %u for device %s",
- ldl_p(&gcpkt->id), vser->bus.qbus.name);
+ virtio_ldl_p(vdev, &gcpkt->id), vser->bus.qbus.name);
return;
}
@@ -342,9 +345,9 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len)
}
if (port->name) {
- stl_p(&cpkt.id, port->id);
- stw_p(&cpkt.event, VIRTIO_CONSOLE_PORT_NAME);
- stw_p(&cpkt.value, 1);
+ virtio_stl_p(vdev, &cpkt.id, port->id);
+ virtio_stw_p(vdev, &cpkt.event, VIRTIO_CONSOLE_PORT_NAME);
+ virtio_stw_p(vdev, &cpkt.value, 1);
buffer_len = sizeof(cpkt) + strlen(port->name) + 1;
buffer = g_malloc(buffer_len);
@@ -510,6 +513,10 @@ static void vser_reset(VirtIODevice *vdev)
vser = VIRTIO_SERIAL(vdev);
guest_reset(vser);
+
+ /* In case we have switched endianness */
+ vser->config.max_nr_ports =
+ virtio_tswap32(vdev, vser->serial.max_virtserial_ports);
}
static void virtio_serial_save(QEMUFile *f, void *opaque)
@@ -532,7 +539,7 @@ static void virtio_serial_save_device(VirtIODevice *vdev, QEMUFile *f)
qemu_put_be32s(f, &s->config.max_nr_ports);
/* The ports map */
- max_nr_ports = tswap32(s->config.max_nr_ports);
+ max_nr_ports = virtio_tswap32(vdev, s->config.max_nr_ports);
for (i = 0; i < (max_nr_ports + 31) / 32; i++) {
qemu_put_be32s(f, &s->ports_map[i]);
}
@@ -688,6 +695,12 @@ static int virtio_serial_load_device(VirtIODevice *vdev, QEMUFile *f,
qemu_get_be16s(f, (uint16_t *) &tmp);
qemu_get_be32s(f, &tmp);
+ /* Note: this is the only location where we use tswap32() instead of
+ * virtio_tswap32() because:
+ * - virtio_tswap32() only makes sense when the device is fully restored
+ * - the target endianness that was used to populate s->config is
+ * necessarly the default one
+ */
max_nr_ports = tswap32(s->config.max_nr_ports);
for (i = 0; i < (max_nr_ports + 31) / 32; i++) {
qemu_get_be32s(f, &ports_map);
@@ -751,9 +764,10 @@ static void virtser_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)
/* This function is only used if a port id is not provided by the user */
static uint32_t find_free_port_id(VirtIOSerial *vser)
{
+ VirtIODevice *vdev = VIRTIO_DEVICE(vser);
unsigned int i, max_nr_ports;
- max_nr_ports = tswap32(vser->config.max_nr_ports);
+ max_nr_ports = virtio_tswap32(vdev, vser->config.max_nr_ports);
for (i = 0; i < (max_nr_ports + 31) / 32; i++) {
uint32_t map, bit;
@@ -806,6 +820,7 @@ static void virtser_port_device_realize(DeviceState *dev, Error **errp)
VirtIOSerialPort *port = VIRTIO_SERIAL_PORT(dev);
VirtIOSerialPortClass *vsc = VIRTIO_SERIAL_PORT_GET_CLASS(port);
VirtIOSerialBus *bus = VIRTIO_SERIAL_BUS(qdev_get_parent_bus(dev));
+ VirtIODevice *vdev = VIRTIO_DEVICE(bus->vser);
int max_nr_ports;
bool plugging_port0;
Error *err = NULL;
@@ -841,7 +856,7 @@ static void virtser_port_device_realize(DeviceState *dev, Error **errp)
}
}
- max_nr_ports = tswap32(port->vser->config.max_nr_ports);
+ max_nr_ports = virtio_tswap32(vdev, port->vser->config.max_nr_ports);
if (port->id >= max_nr_ports) {
error_setg(errp, "virtio-serial-bus: Out-of-range port id specified, "
"max. allowed: %u", max_nr_ports - 1);
@@ -863,7 +878,7 @@ static void virtser_port_device_realize(DeviceState *dev, Error **errp)
add_port(port->vser, port->id);
/* Send an update to the guest about this new port added */
- virtio_notify_config(VIRTIO_DEVICE(port->vser));
+ virtio_notify_config(vdev);
}
static void virtser_port_device_unrealize(DeviceState *dev, Error **errp)
@@ -942,7 +957,8 @@ static void virtio_serial_device_realize(DeviceState *dev, Error **errp)
vser->ovqs[i] = virtio_add_queue(vdev, 128, handle_output);
}
- vser->config.max_nr_ports = tswap32(vser->serial.max_virtserial_ports);
+ vser->config.max_nr_ports =
+ virtio_tswap32(vdev, vser->serial.max_virtserial_ports);
vser->ports_map = g_malloc0(((vser->serial.max_virtserial_ports + 31) / 32)
* sizeof(vser->ports_map[0]));
/*