Message ID | 1403857452-23768-5-git-send-email-cnanakos@grnet.gr |
---|---|
State | New |
Headers | show |
On 06/27/2014 02:24 AM, Chrysostomos Nanakos wrote: > Introduce new enum BlockdevOptionsArchipelago. > > @volume: #Name of the Archipelago volume image > > @mport: #'mport' is the port number on which mapperd is > listening. This is optional and if not specified, > QEMU will make Archipelago to use the default port. > > @vport: #'vport' is the port number on which vlmcd is > listening. This is optional and if not specified, > QEMU will make Archipelago to use the default port. > > @segment: #optional The name of the shared memory segment > Archipelago stack is using. This is optional > and if not specified, QEMU will make Archipelago > use the default value, 'archipelago'. > > Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr> > --- > qapi/block-core.json | 39 ++++++++++++++++++++++++++++++++++++--- > 1 file changed, 36 insertions(+), 3 deletions(-) > > diff --git a/qapi/block-core.json b/qapi/block-core.json > index af6b436..55eb152 100644 > --- a/qapi/block-core.json > +++ b/qapi/block-core.json > @@ -190,8 +190,8 @@ > # @ro: true if the backing device was open read-only > # > # @drv: the name of the block format used to open the backing device. As of > -# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', > -# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', > +# 0.14.0 this can be: 'archipelago', 'blkdebug', 'bochs', 'cloop', 'cow', > +# 'dmg', 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', > # 'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow', > # 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat' The comment is wrong (although not necessarily your fault). It should really look more like: As of 0.14.0, the following are supported:... ...probably some other releases mentioned, as I'm fairly certain not all of the list was in 0.14.0... As of 2.2, the following are also supported: 'archipelago' > # > +## > +# @BlockdevOptionsArchipelago > +# > +# Driver specific block device options for Archipelago. > +# > +# @volume: Name of the Archipelago volume image > +# > +# > +# @mport: #optional The port number on which mapperd is Why two blank lines? > +# listening. This is optional > +# and if not specified, QEMU will make Archipelago > +# use the default port. and that port number is? > +# > +# @vport: #optional The port number on which vlmcd is > +# listening. This is optional > +# and if not specified, QEMU will make Archipelago > +# use the default port. and that port number is? > +# > +# @segment: #optional The name of the shared memory segment > +# Archipelago stack is using. This is optional > +# and if not specified, QEMU will make Archipelago > +# use the default value, 'archipelago'. > +# Since: 2.1 At this point, I'm not sure if your series will make 2.1. We've already entered hard freeze, so even though your first post was before soft freeze, it's hard to justify taking a new feature this late in the game that still hasn't passed review. You will probably have to change this to 2.2 when rebasing. > +## > +{ 'type': 'BlockdevOptionsArchipelago', > + 'data': { 'volume': 'str', > + '*mport': 'int', > + '*vport': 'int', > + '*segment': 'str' } } > + Looks reasonable. > + > ## > # @BlkdebugEvent > # > @@ -1347,6 +1379,7 @@ > 'base': 'BlockdevOptionsBase', > 'discriminator': 'driver', > 'data': { > + 'archipelago':'BlockdevOptionsArchipelago', Again, not necessarily your fault, but we ought to do a better job of documenting when new union branches are added in later releases. > 'file': 'BlockdevOptionsFile', > 'host_device':'BlockdevOptionsFile', > 'host_cdrom': 'BlockdevOptionsFile', >
On 07/02/2014 04:58 PM, Eric Blake wrote: > On 06/27/2014 02:24 AM, Chrysostomos Nanakos wrote: >> Introduce new enum BlockdevOptionsArchipelago. >> >> @volume: #Name of the Archipelago volume image >> >> @mport: #'mport' is the port number on which mapperd is >> listening. This is optional and if not specified, >> QEMU will make Archipelago to use the default port. >> >> @vport: #'vport' is the port number on which vlmcd is >> listening. This is optional and if not specified, >> QEMU will make Archipelago to use the default port. >> >> @segment: #optional The name of the shared memory segment >> Archipelago stack is using. This is optional >> and if not specified, QEMU will make Archipelago >> use the default value, 'archipelago'. >> >> Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr> >> --- >> qapi/block-core.json | 39 ++++++++++++++++++++++++++++++++++++--- >> 1 file changed, 36 insertions(+), 3 deletions(-) >> >> diff --git a/qapi/block-core.json b/qapi/block-core.json >> index af6b436..55eb152 100644 >> --- a/qapi/block-core.json >> +++ b/qapi/block-core.json >> @@ -190,8 +190,8 @@ >> # @ro: true if the backing device was open read-only >> # >> # @drv: the name of the block format used to open the backing device. As of >> -# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', >> -# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', >> +# 0.14.0 this can be: 'archipelago', 'blkdebug', 'bochs', 'cloop', 'cow', >> +# 'dmg', 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', >> # 'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow', >> # 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat' > The comment is wrong (although not necessarily your fault). It should > really look more like: > > As of 0.14.0, the following are supported:... > ...probably some other releases mentioned, as I'm fairly certain not all > of the list was in 0.14.0... > As of 2.2, the following are also supported: 'archipelago' After rebasing I can add 'archipelago' in the 2.2 list. Do you agree? > >> # >> +## >> +# @BlockdevOptionsArchipelago >> +# >> +# Driver specific block device options for Archipelago. >> +# >> +# @volume: Name of the Archipelago volume image >> +# >> +# >> +# @mport: #optional The port number on which mapperd is > Why two blank lines? > >> +# listening. This is optional >> +# and if not specified, QEMU will make Archipelago >> +# use the default port. > and that port number is? > >> +# >> +# @vport: #optional The port number on which vlmcd is >> +# listening. This is optional >> +# and if not specified, QEMU will make Archipelago >> +# use the default port. > and that port number is? Sorry for that, I will add the default ports. > >> +# >> +# @segment: #optional The name of the shared memory segment >> +# Archipelago stack is using. This is optional >> +# and if not specified, QEMU will make Archipelago >> +# use the default value, 'archipelago'. >> +# Since: 2.1 > At this point, I'm not sure if your series will make 2.1. We've already > entered hard freeze, so even though your first post was before soft > freeze, it's hard to justify taking a new feature this late in the game > that still hasn't passed review. You will probably have to change this > to 2.2 when rebasing. > >> +## >> +{ 'type': 'BlockdevOptionsArchipelago', >> + 'data': { 'volume': 'str', >> + '*mport': 'int', >> + '*vport': 'int', >> + '*segment': 'str' } } >> + > Looks reasonable. > >> + >> ## >> # @BlkdebugEvent >> # >> @@ -1347,6 +1379,7 @@ >> 'base': 'BlockdevOptionsBase', >> 'discriminator': 'driver', >> 'data': { >> + 'archipelago':'BlockdevOptionsArchipelago', > Again, not necessarily your fault, but we ought to do a better job of > documenting when new union branches are added in later releases. Any proposition for this one? > >> 'file': 'BlockdevOptionsFile', >> 'host_device':'BlockdevOptionsFile', >> 'host_cdrom': 'BlockdevOptionsFile', >>
On 07/02/2014 08:11 AM, Chrysostomos Nanakos wrote: > On 07/02/2014 04:58 PM, Eric Blake wrote: >> On 06/27/2014 02:24 AM, Chrysostomos Nanakos wrote: >>> Introduce new enum BlockdevOptionsArchipelago. >>> >>> @@ -1347,6 +1379,7 @@ >>> 'base': 'BlockdevOptionsBase', >>> 'discriminator': 'driver', >>> 'data': { >>> + 'archipelago':'BlockdevOptionsArchipelago', >> Again, not necessarily your fault, but we ought to do a better job of >> documenting when new union branches are added in later releases. > > Any proposition for this one? Here's what was done for NetClientOptions: # Since 1.2 # # 'l2tpv3' - since 2.1 although doing it properly would best be done as a separate patch that audits all qapi types. I'm not trying to force you to take on the documentation cleanup patch, although getting just your addition to mention when it was added will make that cleanup audit easier for whoever takes that task on.
diff --git a/qapi/block-core.json b/qapi/block-core.json index af6b436..55eb152 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -190,8 +190,8 @@ # @ro: true if the backing device was open read-only # # @drv: the name of the block format used to open the backing device. As of -# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', -# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', +# 0.14.0 this can be: 'archipelago', 'blkdebug', 'bochs', 'cloop', 'cow', +# 'dmg', 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', # 'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow', # 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat' # @@ -1077,7 +1077,7 @@ # Since: 2.0 ## { 'enum': 'BlockdevDriver', - 'data': [ 'file', 'host_device', 'host_cdrom', 'host_floppy', + 'data': [ 'archipelago', 'file', 'host_device', 'host_cdrom', 'host_floppy', 'http', 'https', 'ftp', 'ftps', 'tftp', 'vvfat', 'blkdebug', 'blkverify', 'bochs', 'cloop', 'cow', 'dmg', 'parallels', 'qcow', 'qcow2', 'qed', 'raw', 'vdi', 'vhdx', 'vmdk', 'vpc', 'quorum' ] } @@ -1207,6 +1207,38 @@ '*pass-discard-snapshot': 'bool', '*pass-discard-other': 'bool' } } + +## +# @BlockdevOptionsArchipelago +# +# Driver specific block device options for Archipelago. +# +# @volume: Name of the Archipelago volume image +# +# +# @mport: #optional The port number on which mapperd is +# listening. This is optional +# and if not specified, QEMU will make Archipelago +# use the default port. +# +# @vport: #optional The port number on which vlmcd is +# listening. This is optional +# and if not specified, QEMU will make Archipelago +# use the default port. +# +# @segment: #optional The name of the shared memory segment +# Archipelago stack is using. This is optional +# and if not specified, QEMU will make Archipelago +# use the default value, 'archipelago'. +# Since: 2.1 +## +{ 'type': 'BlockdevOptionsArchipelago', + 'data': { 'volume': 'str', + '*mport': 'int', + '*vport': 'int', + '*segment': 'str' } } + + ## # @BlkdebugEvent # @@ -1347,6 +1379,7 @@ 'base': 'BlockdevOptionsBase', 'discriminator': 'driver', 'data': { + 'archipelago':'BlockdevOptionsArchipelago', 'file': 'BlockdevOptionsFile', 'host_device':'BlockdevOptionsFile', 'host_cdrom': 'BlockdevOptionsFile',
Introduce new enum BlockdevOptionsArchipelago. @volume: #Name of the Archipelago volume image @mport: #'mport' is the port number on which mapperd is listening. This is optional and if not specified, QEMU will make Archipelago to use the default port. @vport: #'vport' is the port number on which vlmcd is listening. This is optional and if not specified, QEMU will make Archipelago to use the default port. @segment: #optional The name of the shared memory segment Archipelago stack is using. This is optional and if not specified, QEMU will make Archipelago use the default value, 'archipelago'. Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr> --- qapi/block-core.json | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-)