| Message ID | 1403806546-31122-5-git-send-email-javier.martinez@collabora.co.uk |
|---|---|
| State | Superseded, archived |
| Headers | show |
Quoting Javier Martinez Canillas (2014-06-26 11:15:36) > Like most clock drivers, the Maxim 77686 PMIC clock binding > follows the convention that the "#clock-cells" property is > used to specify the number of cells in a clock provider. > > But the binding document is not clear enough that it shall > be set to 1 since the PMIC support multiple clocks outputs. > > Also, explain that the clocks identifiers are defined in a > header file that can be included by Device Tree source with > client nodes to avoid using magic numbers. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Reviewed-by: Doug Anderson <dianders@chromium.org> Looks good to me. Regards, Mike > --- > > Changes since v4: None > > Changes since v3: > - Don't change clock-names property to make clear that it's > the consumer clock name and should not match the producer clock. > Suggested by Doug Anderson. > > Documentation/devicetree/bindings/clock/maxim,max77686.txt | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt > index 96ce71b..48e00bb 100644 > --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt > +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt > @@ -9,13 +9,18 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled > Following properties should be presend in main device node of the MFD chip. > > Required properties: > -- #clock-cells: simple one-cell clock specifier format is used, where the > - only cell is used as an index of the clock inside the provider. Following > - indices are allowed: > + > +- #clock-cells: from common clock binding; shall be set to 1. > + > +Each clock is assigned an identifier and client nodes can use this identifier > +to specify the clock which they consume. Following indices are allowed: > - 0: 32khz_ap clock, > - 1: 32khz_cp clock, > - 2: 32khz_pmic clock. > > +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h > +header and can be used in device tree sources. > + > Example: Node of the MFD chip > > max77686: max77686@09 { > @@ -34,5 +39,5 @@ Example: Clock consumer node > compatible = "bar,foo"; > /* ... */ > clock-names = "my-clock"; > - clocks = <&max77686 2>; > + clocks = <&max77686 MAX77686_CLK_PMIC>; > }; > -- > 2.0.0.rc2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Mike, On 07/01/2014 07:29 PM, Mike Turquette wrote: > Quoting Javier Martinez Canillas (2014-06-26 11:15:36) >> Like most clock drivers, the Maxim 77686 PMIC clock binding >> follows the convention that the "#clock-cells" property is >> used to specify the number of cells in a clock provider. >> >> But the binding document is not clear enough that it shall >> be set to 1 since the PMIC support multiple clocks outputs. >> >> Also, explain that the clocks identifiers are defined in a >> header file that can be included by Device Tree source with >> client nodes to avoid using magic numbers. >> >> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> >> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> Reviewed-by: Doug Anderson <dianders@chromium.org> > > Looks good to me. > > Regards, > Mike > Thanks a lot, an Acked-by or Reviewed-by tags for this patch and 03/14 will be great as well so I can carry those on the next version of the series. Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoting Javier Martinez Canillas (2014-07-02 03:17:54) > Hello Mike, > > On 07/01/2014 07:29 PM, Mike Turquette wrote: > > Quoting Javier Martinez Canillas (2014-06-26 11:15:36) > >> Like most clock drivers, the Maxim 77686 PMIC clock binding > >> follows the convention that the "#clock-cells" property is > >> used to specify the number of cells in a clock provider. > >> > >> But the binding document is not clear enough that it shall > >> be set to 1 since the PMIC support multiple clocks outputs. > >> > >> Also, explain that the clocks identifiers are defined in a > >> header file that can be included by Device Tree source with > >> client nodes to avoid using magic numbers. > >> > >> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > >> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > >> Reviewed-by: Doug Anderson <dianders@chromium.org> > > > > Looks good to me. > > > > Regards, > > Mike > > > > Thanks a lot, an Acked-by or Reviewed-by tags for this patch and 03/14 will be > great as well so I can carry those on the next version of the series. Sure you can interpret my "looks good to me" as either an Ack or a Reviewed-by, depending on context. In this case feel free to add: Reviewed-by: Mike Turquette <mturquette@linaro.org> Regards, Mike > > Best regards, > Javier > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 96ce71b..48e00bb 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -9,13 +9,18 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled Following properties should be presend in main device node of the MFD chip. Required properties: -- #clock-cells: simple one-cell clock specifier format is used, where the - only cell is used as an index of the clock inside the provider. Following - indices are allowed: + +- #clock-cells: from common clock binding; shall be set to 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: - 0: 32khz_ap clock, - 1: 32khz_cp clock, - 2: 32khz_pmic clock. +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h +header and can be used in device tree sources. + Example: Node of the MFD chip max77686: max77686@09 { @@ -34,5 +39,5 @@ Example: Clock consumer node compatible = "bar,foo"; /* ... */ clock-names = "my-clock"; - clocks = <&max77686 2>; + clocks = <&max77686 MAX77686_CLK_PMIC>; };