| Message ID | 1403723019-6212-5-git-send-email-javier.martinez@collabora.co.uk |
|---|---|
| State | Superseded, archived |
| Headers | show |
Javier, On Wed, Jun 25, 2014 at 12:03 PM, Javier Martinez Canillas <javier.martinez@collabora.co.uk> wrote: > Like most clock drivers, the Maxim 77686 PMIC clock binding > follows the convention that the "#clock-cells" property is > used to specify the number of cells in a clock provider. > > But the binding document is not clear enough that it shall > be set to 1 since the PMIC support multiple clocks outputs. > > Also, explain that the clocks identifiers are defined in a > header file that can be included by Device Tree source with > client nodes to avoid using magic numbers. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > > Changes since v3: > - Don't change clock-names property to make clear that it's > the consumer clock name and should not match the producer clock. > Suggested by Doug Anderson. > > Documentation/devicetree/bindings/clock/maxim,max77686.txt | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) Reviewed-by: Doug Anderson <dianders@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 96ce71b..48e00bb 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -9,13 +9,18 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled Following properties should be presend in main device node of the MFD chip. Required properties: -- #clock-cells: simple one-cell clock specifier format is used, where the - only cell is used as an index of the clock inside the provider. Following - indices are allowed: + +- #clock-cells: from common clock binding; shall be set to 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: - 0: 32khz_ap clock, - 1: 32khz_cp clock, - 2: 32khz_pmic clock. +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h +header and can be used in device tree sources. + Example: Node of the MFD chip max77686: max77686@09 { @@ -34,5 +39,5 @@ Example: Clock consumer node compatible = "bar,foo"; /* ... */ clock-names = "my-clock"; - clocks = <&max77686 2>; + clocks = <&max77686 MAX77686_CLK_PMIC>; };