@@ -29,15 +29,6 @@ TMPL="${TMPDIR1}/${TMPB}.lo"
TMPA="${TMPDIR1}/lib${TMPB}.la"
TMPE="${TMPDIR1}/${TMPB}.exe"
-rm -f config.log
-
-# Print a helpful header at the top of config.log
-echo "# QEMU configure log $(date)" >> config.log
-printf "# Configured with:" >> config.log
-printf " '%s'" "$0" "$@" >> config.log
-echo >> config.log
-echo "#" >> config.log
-
error_exit() {
echo
echo "ERROR: $1"
@@ -432,314 +423,28 @@ EOF
compile_object
}
-if check_define __linux__ ; then
- targetos="Linux"
-elif check_define _WIN32 ; then
- targetos='MINGW32'
-elif check_define __OpenBSD__ ; then
- targetos='OpenBSD'
-elif check_define __sun__ ; then
- targetos='SunOS'
-elif check_define __HAIKU__ ; then
- targetos='Haiku'
-else
- targetos=`uname -s`
-fi
+werror=""
-# Some host OSes need non-standard checks for which CPU to use.
-# Note that these checks are broken for cross-compilation: if you're
-# cross-compiling to one of these OSes then you'll need to specify
-# the correct CPU with the --cpu option.
-case $targetos in
-Darwin)
- # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
- # run 64-bit userspace code.
- # If the user didn't specify a CPU explicitly and the kernel says this is
- # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
- if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
- cpu="x86_64"
- fi
+for opt do
+ optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
+ case "$opt" in
+ --help|-h) show_help=yes
;;
-SunOS)
- # `uname -m` returns i86pc even on an x86_64 box, so default based on isainfo
- if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
- cpu="x86_64"
- fi
-esac
-
-if test ! -z "$cpu" ; then
- # command line argument
- :
-elif check_define __i386__ ; then
- cpu="i386"
-elif check_define __x86_64__ ; then
- if check_define __ILP32__ ; then
- cpu="x32"
- else
- cpu="x86_64"
- fi
-elif check_define __sparc__ ; then
- if check_define __arch64__ ; then
- cpu="sparc64"
- else
- cpu="sparc"
- fi
-elif check_define _ARCH_PPC ; then
- if check_define _ARCH_PPC64 ; then
- cpu="ppc64"
- else
- cpu="ppc"
- fi
-elif check_define __mips__ ; then
- cpu="mips"
-elif check_define __ia64__ ; then
- cpu="ia64"
-elif check_define __s390__ ; then
- if check_define __s390x__ ; then
- cpu="s390x"
- else
- cpu="s390"
- fi
-elif check_define __arm__ ; then
- cpu="arm"
-elif check_define __aarch64__ ; then
- cpu="aarch64"
-elif check_define __hppa__ ; then
- cpu="hppa"
-else
- cpu=`uname -m`
-fi
-
-ARCH=
-# Normalise host CPU name and set ARCH.
-# Note that this case should only have supported host CPUs, not guests.
-case "$cpu" in
- ia64|ppc|ppc64|s390|s390x|sparc64|x32)
- cpu="$cpu"
+ --version|-V) exec cat $source_path/VERSION
;;
- i386|i486|i586|i686|i86pc|BePC)
- cpu="i386"
+ --prefix=*) prefix="$optarg"
;;
- x86_64|amd64)
- cpu="x86_64"
+ --interp-prefix=*) interp_prefix="$optarg"
;;
- armv*b|armv*l|arm)
- cpu="arm"
+ --source-path=*)
;;
- aarch64)
- cpu="aarch64"
+ --cross-prefix=*)
;;
- mips*)
- cpu="mips"
+ --cc=*)
;;
- sparc|sun4[cdmuv])
- cpu="sparc"
+ --host-cc=*) host_cc="$optarg"
;;
- *)
- # This will result in either an error or falling back to TCI later
- ARCH=unknown
- ;;
-esac
-if test -z "$ARCH"; then
- ARCH="$cpu"
-fi
-
-# OS specific
-
-# host *BSD for user mode
-HOST_VARIANT_DIR=""
-
-case $targetos in
-CYGWIN*)
- mingw32="yes"
- QEMU_CFLAGS="-mno-cygwin $QEMU_CFLAGS"
- audio_possible_drivers="winwave sdl"
- audio_drv_list="winwave"
-;;
-MINGW32*)
- mingw32="yes"
- audio_possible_drivers="winwave dsound sdl fmod"
- audio_drv_list="winwave"
-;;
-GNU/kFreeBSD)
- bsd="yes"
- audio_drv_list="oss"
- audio_possible_drivers="oss sdl esd pa"
-;;
-FreeBSD)
- bsd="yes"
- make="${MAKE-gmake}"
- audio_drv_list="oss"
- audio_possible_drivers="oss sdl esd pa"
- # needed for kinfo_getvmmap(3) in libutil.h
- LIBS="-lutil $LIBS"
- netmap="" # enable netmap autodetect
- HOST_VARIANT_DIR="freebsd"
-;;
-DragonFly)
- bsd="yes"
- make="${MAKE-gmake}"
- audio_drv_list="oss"
- audio_possible_drivers="oss sdl esd pa"
- HOST_VARIANT_DIR="dragonfly"
-;;
-NetBSD)
- bsd="yes"
- make="${MAKE-gmake}"
- audio_drv_list="oss"
- audio_possible_drivers="oss sdl esd"
- oss_lib="-lossaudio"
- HOST_VARIANT_DIR="netbsd"
-;;
-OpenBSD)
- bsd="yes"
- make="${MAKE-gmake}"
- audio_drv_list="sdl"
- audio_possible_drivers="sdl esd"
- HOST_VARIANT_DIR="openbsd"
-;;
-Darwin)
- bsd="yes"
- darwin="yes"
- LDFLAGS_SHARED="-bundle -undefined dynamic_lookup"
- if [ "$cpu" = "x86_64" ] ; then
- QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
- LDFLAGS="-arch x86_64 $LDFLAGS"
- fi
- cocoa="yes"
- audio_drv_list="coreaudio"
- audio_possible_drivers="coreaudio sdl fmod"
- LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS"
- libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
- # Disable attempts to use ObjectiveC features in os/object.h since they
- # won't work when we're compiling with gcc as a C compiler.
- QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
- HOST_VARIANT_DIR="darwin"
-;;
-SunOS)
- solaris="yes"
- make="${MAKE-gmake}"
- install="${INSTALL-ginstall}"
- ld="gld"
- smbd="${SMBD-/usr/sfw/sbin/smbd}"
- needs_libsunmath="no"
- solarisrev=`uname -r | cut -f2 -d.`
- if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
- if test "$solarisrev" -le 9 ; then
- if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then
- needs_libsunmath="yes"
- QEMU_CFLAGS="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS"
- LDFLAGS="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS"
- LIBS="-lsunmath $LIBS"
- else
- error_exit "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \
- "libsunmath from the Sun Studio compilers tools, due to a lack of" \
- "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \
- "Studio 11 can be downloaded from www.sun.com."
- fi
- fi
- fi
- if test -f /usr/include/sys/soundcard.h ; then
- audio_drv_list="oss"
- fi
- audio_possible_drivers="oss sdl"
-# needed for CMSG_ macros in sys/socket.h
- QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
-# needed for TIOCWIN* defines in termios.h
- QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
- QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS"
- solarisnetlibs="-lsocket -lnsl -lresolv"
- LIBS="$solarisnetlibs $LIBS"
- libs_qga="$solarisnetlibs $libs_qga"
-;;
-AIX)
- aix="yes"
- make="${MAKE-gmake}"
-;;
-Haiku)
- haiku="yes"
- QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
- LIBS="-lposix_error_mapper -lnetwork $LIBS"
-;;
-*)
- audio_drv_list="oss"
- audio_possible_drivers="oss alsa sdl esd pa"
- linux="yes"
- linux_user="yes"
- kvm="yes"
- vhost_net="yes"
- vhost_scsi="yes"
- if [ "$cpu" = "i386" -o "$cpu" = "x86_64" -o "$cpu" = "x32" ] ; then
- audio_possible_drivers="$audio_possible_drivers fmod"
- fi
- QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
-;;
-esac
-
-if [ "$bsd" = "yes" ] ; then
- if [ "$darwin" != "yes" ] ; then
- bsd_user="yes"
- fi
-fi
-
-: ${make=${MAKE-make}}
-: ${install=${INSTALL-install}}
-: ${python=${PYTHON-python}}
-: ${smbd=${SMBD-/usr/sbin/smbd}}
-
-# Default objcc to clang if available, otherwise use CC
-if has clang; then
- objcc=clang
-else
- objcc="$cc"
-fi
-
-if test "$mingw32" = "yes" ; then
- EXESUF=".exe"
- DSOSUF=".dll"
- QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
- # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
- QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
- LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
-cat > $TMPC << EOF
-int main(void) { return 0; }
-EOF
- if compile_prog "" "-liberty" ; then
- LIBS="-liberty $LIBS"
- fi
- prefix="c:/Program Files/QEMU"
- mandir="\${prefix}"
- datadir="\${prefix}"
- qemu_docdir="\${prefix}"
- bindir="\${prefix}"
- sysconfdir="\${prefix}"
- local_statedir=
- confsuffix=""
- libs_qga="-lws2_32 -lwinmm -lpowrprof $libs_qga"
-fi
-
-werror=""
-
-for opt do
- optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
- case "$opt" in
- --help|-h) show_help=yes
- ;;
- --version|-V) exec cat $source_path/VERSION
- ;;
- --prefix=*) prefix="$optarg"
- ;;
- --interp-prefix=*) interp_prefix="$optarg"
- ;;
- --source-path=*)
- ;;
- --cross-prefix=*)
- ;;
- --cc=*)
- ;;
- --host-cc=*) host_cc="$optarg"
- ;;
- --cxx=*)
+ --cxx=*)
;;
--iasl=*) iasl="$optarg"
;;
@@ -1126,89 +831,6 @@ for opt do
esac
done
-if ! has $python; then
- error_exit "Python not found. Use --python=/path/to/python"
-fi
-
-# Note that if the Python conditional here evaluates True we will exit
-# with status 1 which is a shell 'false' value.
-if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then
- error_exit "Cannot use '$python', Python 2.4 or later is required." \
- "Note that Python 3 or later is not yet supported." \
- "Use --python=/path/to/python to specify a supported Python."
-fi
-
-# The -B switch was added in Python 2.6.
-# If it is supplied, compiled files are not written.
-# Use it for Python versions which support it.
-if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then
- python="$python -B"
-fi
-
-case "$cpu" in
- ppc)
- CPU_CFLAGS="-m32"
- LDFLAGS="-m32 $LDFLAGS"
- ;;
- ppc64)
- CPU_CFLAGS="-m64"
- LDFLAGS="-m64 $LDFLAGS"
- ;;
- sparc)
- LDFLAGS="-m32 $LDFLAGS"
- CPU_CFLAGS="-m32 -mcpu=ultrasparc"
- ;;
- sparc64)
- LDFLAGS="-m64 $LDFLAGS"
- CPU_CFLAGS="-m64 -mcpu=ultrasparc"
- ;;
- s390)
- CPU_CFLAGS="-m31"
- LDFLAGS="-m31 $LDFLAGS"
- ;;
- s390x)
- CPU_CFLAGS="-m64"
- LDFLAGS="-m64 $LDFLAGS"
- ;;
- i386)
- CPU_CFLAGS="-m32"
- LDFLAGS="-m32 $LDFLAGS"
- cc_i386='$(CC) -m32'
- ;;
- x86_64)
- CPU_CFLAGS="-m64"
- LDFLAGS="-m64 $LDFLAGS"
- cc_i386='$(CC) -m32'
- ;;
- x32)
- CPU_CFLAGS="-mx32"
- LDFLAGS="-mx32 $LDFLAGS"
- cc_i386='$(CC) -m32'
- ;;
- # No special flags required for other host CPUs
-esac
-
-QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
-EXTRA_CFLAGS="$CPU_CFLAGS $EXTRA_CFLAGS"
-
-default_target_list=""
-
-mak_wilds=""
-
-if [ "$softmmu" = "yes" ]; then
- mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
-fi
-if [ "$linux_user" = "yes" ]; then
- mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
-fi
-if [ "$bsd_user" = "yes" ]; then
- mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
-fi
-
-for config in $mak_wilds; do
- default_target_list="${default_target_list} $(basename "$config" .mak)"
-done
-
if test x"$show_help" = x"yes" ; then
cat << EOF
@@ -1390,6 +1012,384 @@ EOF
exit 0
fi
+rm -f config.log
+
+# Print a helpful header at the top of config.log
+echo "# QEMU configure log $(date)" >> config.log
+printf "# Configured with:" >> config.log
+printf " '%s'" "$0" "$@" >> config.log
+echo >> config.log
+echo "#" >> config.log
+
+if check_define __linux__ ; then
+ targetos="Linux"
+elif check_define _WIN32 ; then
+ targetos='MINGW32'
+elif check_define __OpenBSD__ ; then
+ targetos='OpenBSD'
+elif check_define __sun__ ; then
+ targetos='SunOS'
+elif check_define __HAIKU__ ; then
+ targetos='Haiku'
+else
+ targetos=`uname -s`
+fi
+
+# Some host OSes need non-standard checks for which CPU to use.
+# Note that these checks are broken for cross-compilation: if you're
+# cross-compiling to one of these OSes then you'll need to specify
+# the correct CPU with the --cpu option.
+case $targetos in
+Darwin)
+ # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
+ # run 64-bit userspace code.
+ # If the user didn't specify a CPU explicitly and the kernel says this is
+ # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
+ if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
+ cpu="x86_64"
+ fi
+ ;;
+SunOS)
+ # `uname -m` returns i86pc even on an x86_64 box, so default based on isainfo
+ if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
+ cpu="x86_64"
+ fi
+esac
+
+if test ! -z "$cpu" ; then
+ # command line argument
+ :
+elif check_define __i386__ ; then
+ cpu="i386"
+elif check_define __x86_64__ ; then
+ if check_define __ILP32__ ; then
+ cpu="x32"
+ else
+ cpu="x86_64"
+ fi
+elif check_define __sparc__ ; then
+ if check_define __arch64__ ; then
+ cpu="sparc64"
+ else
+ cpu="sparc"
+ fi
+elif check_define _ARCH_PPC ; then
+ if check_define _ARCH_PPC64 ; then
+ cpu="ppc64"
+ else
+ cpu="ppc"
+ fi
+elif check_define __mips__ ; then
+ cpu="mips"
+elif check_define __ia64__ ; then
+ cpu="ia64"
+elif check_define __s390__ ; then
+ if check_define __s390x__ ; then
+ cpu="s390x"
+ else
+ cpu="s390"
+ fi
+elif check_define __arm__ ; then
+ cpu="arm"
+elif check_define __aarch64__ ; then
+ cpu="aarch64"
+elif check_define __hppa__ ; then
+ cpu="hppa"
+else
+ cpu=`uname -m`
+fi
+
+ARCH=
+# Normalise host CPU name and set ARCH.
+# Note that this case should only have supported host CPUs, not guests.
+case "$cpu" in
+ ia64|ppc|ppc64|s390|s390x|sparc64|x32)
+ cpu="$cpu"
+ ;;
+ i386|i486|i586|i686|i86pc|BePC)
+ cpu="i386"
+ ;;
+ x86_64|amd64)
+ cpu="x86_64"
+ ;;
+ armv*b|armv*l|arm)
+ cpu="arm"
+ ;;
+ aarch64)
+ cpu="aarch64"
+ ;;
+ mips*)
+ cpu="mips"
+ ;;
+ sparc|sun4[cdmuv])
+ cpu="sparc"
+ ;;
+ *)
+ # This will result in either an error or falling back to TCI later
+ ARCH=unknown
+ ;;
+esac
+if test -z "$ARCH"; then
+ ARCH="$cpu"
+fi
+
+# OS specific
+
+# host *BSD for user mode
+HOST_VARIANT_DIR=""
+
+case $targetos in
+CYGWIN*)
+ mingw32="yes"
+ QEMU_CFLAGS="-mno-cygwin $QEMU_CFLAGS"
+ audio_possible_drivers="winwave sdl"
+ audio_drv_list="winwave"
+;;
+MINGW32*)
+ mingw32="yes"
+ audio_possible_drivers="winwave dsound sdl fmod"
+ audio_drv_list="winwave"
+;;
+GNU/kFreeBSD)
+ bsd="yes"
+ audio_drv_list="oss"
+ audio_possible_drivers="oss sdl esd pa"
+;;
+FreeBSD)
+ bsd="yes"
+ make="${MAKE-gmake}"
+ audio_drv_list="oss"
+ audio_possible_drivers="oss sdl esd pa"
+ # needed for kinfo_getvmmap(3) in libutil.h
+ LIBS="-lutil $LIBS"
+ netmap="" # enable netmap autodetect
+ HOST_VARIANT_DIR="freebsd"
+;;
+DragonFly)
+ bsd="yes"
+ make="${MAKE-gmake}"
+ audio_drv_list="oss"
+ audio_possible_drivers="oss sdl esd pa"
+ HOST_VARIANT_DIR="dragonfly"
+;;
+NetBSD)
+ bsd="yes"
+ make="${MAKE-gmake}"
+ audio_drv_list="oss"
+ audio_possible_drivers="oss sdl esd"
+ oss_lib="-lossaudio"
+ HOST_VARIANT_DIR="netbsd"
+;;
+OpenBSD)
+ bsd="yes"
+ make="${MAKE-gmake}"
+ audio_drv_list="sdl"
+ audio_possible_drivers="sdl esd"
+ HOST_VARIANT_DIR="openbsd"
+;;
+Darwin)
+ bsd="yes"
+ darwin="yes"
+ LDFLAGS_SHARED="-bundle -undefined dynamic_lookup"
+ if [ "$cpu" = "x86_64" ] ; then
+ QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
+ LDFLAGS="-arch x86_64 $LDFLAGS"
+ fi
+ cocoa="yes"
+ audio_drv_list="coreaudio"
+ audio_possible_drivers="coreaudio sdl fmod"
+ LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS"
+ libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
+ # Disable attempts to use ObjectiveC features in os/object.h since they
+ # won't work when we're compiling with gcc as a C compiler.
+ QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
+ HOST_VARIANT_DIR="darwin"
+;;
+SunOS)
+ solaris="yes"
+ make="${MAKE-gmake}"
+ install="${INSTALL-ginstall}"
+ ld="gld"
+ smbd="${SMBD-/usr/sfw/sbin/smbd}"
+ needs_libsunmath="no"
+ solarisrev=`uname -r | cut -f2 -d.`
+ if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
+ if test "$solarisrev" -le 9 ; then
+ if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then
+ needs_libsunmath="yes"
+ QEMU_CFLAGS="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS"
+ LDFLAGS="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS"
+ LIBS="-lsunmath $LIBS"
+ else
+ error_exit "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \
+ "libsunmath from the Sun Studio compilers tools, due to a lack of" \
+ "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \
+ "Studio 11 can be downloaded from www.sun.com."
+ fi
+ fi
+ fi
+ if test -f /usr/include/sys/soundcard.h ; then
+ audio_drv_list="oss"
+ fi
+ audio_possible_drivers="oss sdl"
+# needed for CMSG_ macros in sys/socket.h
+ QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
+# needed for TIOCWIN* defines in termios.h
+ QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
+ QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS"
+ solarisnetlibs="-lsocket -lnsl -lresolv"
+ LIBS="$solarisnetlibs $LIBS"
+ libs_qga="$solarisnetlibs $libs_qga"
+;;
+AIX)
+ aix="yes"
+ make="${MAKE-gmake}"
+;;
+Haiku)
+ haiku="yes"
+ QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
+ LIBS="-lposix_error_mapper -lnetwork $LIBS"
+;;
+*)
+ audio_drv_list="oss"
+ audio_possible_drivers="oss alsa sdl esd pa"
+ linux="yes"
+ linux_user="yes"
+ kvm="yes"
+ vhost_net="yes"
+ vhost_scsi="yes"
+ if [ "$cpu" = "i386" -o "$cpu" = "x86_64" -o "$cpu" = "x32" ] ; then
+ audio_possible_drivers="$audio_possible_drivers fmod"
+ fi
+ QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
+;;
+esac
+
+if [ "$bsd" = "yes" ] ; then
+ if [ "$darwin" != "yes" ] ; then
+ bsd_user="yes"
+ fi
+fi
+
+: ${make=${MAKE-make}}
+: ${install=${INSTALL-install}}
+: ${python=${PYTHON-python}}
+: ${smbd=${SMBD-/usr/sbin/smbd}}
+
+# Default objcc to clang if available, otherwise use CC
+if has clang; then
+ objcc=clang
+else
+ objcc="$cc"
+fi
+
+if test "$mingw32" = "yes" ; then
+ EXESUF=".exe"
+ DSOSUF=".dll"
+ QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
+ # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
+ QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
+ LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
+cat > $TMPC << EOF
+int main(void) { return 0; }
+EOF
+ if compile_prog "" "-liberty" ; then
+ LIBS="-liberty $LIBS"
+ fi
+ prefix="c:/Program Files/QEMU"
+ mandir="\${prefix}"
+ datadir="\${prefix}"
+ qemu_docdir="\${prefix}"
+ bindir="\${prefix}"
+ sysconfdir="\${prefix}"
+ local_statedir=
+ confsuffix=""
+ libs_qga="-lws2_32 -lwinmm -lpowrprof $libs_qga"
+fi
+
+if ! has $python; then
+ error_exit "Python not found. Use --python=/path/to/python"
+fi
+
+# Note that if the Python conditional here evaluates True we will exit
+# with status 1 which is a shell 'false' value.
+if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then
+ error_exit "Cannot use '$python', Python 2.4 or later is required." \
+ "Note that Python 3 or later is not yet supported." \
+ "Use --python=/path/to/python to specify a supported Python."
+fi
+
+# The -B switch was added in Python 2.6.
+# If it is supplied, compiled files are not written.
+# Use it for Python versions which support it.
+if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then
+ python="$python -B"
+fi
+
+case "$cpu" in
+ ppc)
+ CPU_CFLAGS="-m32"
+ LDFLAGS="-m32 $LDFLAGS"
+ ;;
+ ppc64)
+ CPU_CFLAGS="-m64"
+ LDFLAGS="-m64 $LDFLAGS"
+ ;;
+ sparc)
+ LDFLAGS="-m32 $LDFLAGS"
+ CPU_CFLAGS="-m32 -mcpu=ultrasparc"
+ ;;
+ sparc64)
+ LDFLAGS="-m64 $LDFLAGS"
+ CPU_CFLAGS="-m64 -mcpu=ultrasparc"
+ ;;
+ s390)
+ CPU_CFLAGS="-m31"
+ LDFLAGS="-m31 $LDFLAGS"
+ ;;
+ s390x)
+ CPU_CFLAGS="-m64"
+ LDFLAGS="-m64 $LDFLAGS"
+ ;;
+ i386)
+ CPU_CFLAGS="-m32"
+ LDFLAGS="-m32 $LDFLAGS"
+ cc_i386='$(CC) -m32'
+ ;;
+ x86_64)
+ CPU_CFLAGS="-m64"
+ LDFLAGS="-m64 $LDFLAGS"
+ cc_i386='$(CC) -m32'
+ ;;
+ x32)
+ CPU_CFLAGS="-mx32"
+ LDFLAGS="-mx32 $LDFLAGS"
+ cc_i386='$(CC) -m32'
+ ;;
+ # No special flags required for other host CPUs
+esac
+
+QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
+EXTRA_CFLAGS="$CPU_CFLAGS $EXTRA_CFLAGS"
+
+default_target_list=""
+
+mak_wilds=""
+
+if [ "$softmmu" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
+fi
+if [ "$linux_user" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
+fi
+if [ "$bsd_user" = "yes" ]; then
+ mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
+fi
+
+for config in $mak_wilds; do
+ default_target_list="${default_target_list} $(basename "$config" .mak)"
+done
+
# Now we have handled --enable-tcg-interpreter and know we're not just
# printing the help message, bail out if the host CPU isn't supported.
if test "$ARCH" = "unknown"; then
Reorder the code so that the existing config.log file is not modified by configure when --help is used. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> --- configure | 782 +++++++++++++++++++++++++++++++------------------------------- 1 file changed, 391 insertions(+), 391 deletions(-)