therm_adt746x: Don't access non-existing register

Message ID E1My94C-0002GE-00@alva.home
State Not Applicable
Headers show

Commit Message

Tim Shepard Oct. 14, 2009, 6:59 p.m.

I tried one reboot with your patch, failed as usual.
(Patch sounds like a good idea though.)

			-Tim Shepard

tree<11>$ git describe
tree<12>$ git diff HEAD^ HEAD
tree<13>$ dmesg | head
Using PowerMac machine description
Total memory = 1536MB; using 4096kB for hash table (at cfc00000)
Linux version (shep@tree) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #9 Wed Oct 14 13:41:40 EDT 2009
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd9
Mapped at 0xff7c0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook G4 15"
console [udbg0] enabled
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
tree<14>$ dmesg | grep adt
adt746x: version 1 (supported)
adt746x: Thermostat bus: 0, address: 0x2e, limit_adjust: 0, fan_speed: -1
therm_adt746x 7-002e: Thermostat failed to read config!


diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 0554dae..bf9ed2d 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -366,7 +366,7 @@  static int probe_thermostat(struct i2c_client *client,
        i2c_set_clientdata(client, th);
        th->clt = client;
-       rc = read_reg(th, 0);
+       rc = read_reg(th, CONFIG_REG);
        if (rc < 0) {
                dev_err(&client->dev, "Thermostat failed to read config!\n");