Message ID | 1402634557-8630-1-git-send-email-festevam@gmail.com |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefano Babic |
Headers | show |
Hi Fabio, On 13/06/2014 06:42, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@freescale.com> > > Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces > set_ldo_voltage() function that can be used to set the voltages > of any of the three LDO regulators controlled by the PMU_REG_CORE register. > > Prior to this commit there was a single set_vddsoc() which only configured the > VDDSOC regulator. > > Update the comments to align with the new set_ldo_voltage() implementation. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- Applied to u-boot-imx (fix), thanks ! Best regards, Stefano Babic
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 1725279..f20bdeb 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -124,10 +124,9 @@ static void clear_ldo_ramp(void) } /* - * Set the VDDSOC + * Set the PMU_REG_CORE register * - * Mask out the REG_CORE[22:18] bits (REG2_TRIG) and set - * them to the specified millivolt level. + * Set LDO_SOC/PU/ARM regulators to the specified millivolt level. * Possible values are from 0.725V to 1.450V in steps of * 0.025V (25mV). */